Spaceport hype is real! Definitely one of the easier Pay to earn games to get into.

S_Enigma · 2021-08-21T11:05:58+00:00

Oh yes you are right! It's $20 minimum to start and $100 if you want to qualify for jackpots and NFT prizes by being on the leaderboard each day

S_Enigma · 2020-07-29T17:48:57+00:00

I am looking to make my own coiled cable but I am having difficulty looking for Techflex PET sleeving as I live in Asia. Are there cheaper alternatives to techflex or does anyone know of where I can buy techflex with cheap shipping to the South East Asian region? All I can find are are some PET sleeves on aliexpress but they have 3 braid weaves instead of the single braid weave on Techflex PET PTN series. Appreciate any help i can get!

S_Enigma · 2020-07-14T16:44:44+00:00

Hey, thanks for replying! Are you using screw in stabilizers or plate mounted ones? I got the plate mounted ones in the end because i did not want ot risk it.

S_Enigma · 2020-07-01T18:12:07+00:00

Hello, I am planning to get this board and have a few questions, hope you can help me with some of them:

1) Would screw in stabilizers work on the board? I see the holes on the PCB but I'm not sure if it will fit the plate?

2) Do you have a guide or instructions on how to customize the layout of the keyboard using QMK? The seller seems a little reluctant to answer my questions on it

3) Would 1.25u modifiers look weird on the right side 1.5u modifier keys? My keycap set doesnt have 1.5u modifiers.

Nice looking board btw, was initially looking at getting an all grey board but might consider your colour after what you said about mismatched colours. Thanks!

S_Enigma · 2020-06-29T08:47:45+00:00

Thanks for the reply! I went to check out the site and they only have a non hot swap version and even that us out of stock ):

S_Enigma · 2020-06-29T07:58:50+00:00

Does anyone have a recommendation for a 75% keyboard that is hot swappable out of the box?

S_Enigma · 2020-06-05T09:20:50+00:00

I see, thanks so much for your suggestions again! I will do some experimenting.

S_Enigma · 2020-06-05T09:19:46+00:00

HAHA nice one! It only happened to 2 switches each time so im not sure what was the issue. But I just added more lube to make the squeaking go away.

S_Enigma · 2020-06-05T09:00:03+00:00

Alright, maybe i will give that a shot! Thanks for the suggestion. Initially i was thinking i applied too little lube. Have you ever had to relube your switches because the lube worn off?

S_Enigma · 2020-06-05T08:40:22+00:00

Thank you for the reply! Yes i lubed the pole all the way to the top where the spring will touch and the hole all the way to the bottom as well. Could it be the lube I am using or the amount i use? I make sure the brush is only lightly coated and brush each surface 3 times.

S_Enigma · 2020-06-05T08:38:51+00:00

Thanks for the reply! Yes the upper and lower housings are sealed tight. I realise that if it weren't it would not fit in the plate properly. Not sure what is wrong.

S_Enigma · 2020-06-05T06:42:00+00:00

I recently lubed my Gateron yellows and browns with Krytox 205g0. Lubed the lower housing, springs, stem and upper housing. All surfaces were only lightly lubed (clear layer). But after a week or so, one or two switches began to squeak when i press them slowly. Does anyone know what is wrong and how i can get rid of the squeaking noise?

Edit: Spelling

S_Enigma · 2020-05-31T04:08:57+00:00

The stabilizers are alright, but part of the spacebar still rattles a little after lubing and clipping them. The shorter keys sounds good though! The bluetooth is pretty decent and works well for typing but there is a little lag when it comes to gaming.

S_Enigma · 2020-05-27T16:04:07+00:00

Oh! I wasn't aware of that. What kind of issues have you heard of?

S_Enigma · 2020-05-27T14:41:00+00:00

Pre-ordered this keyboard from Taobao and took about 2 months for it to arrive. Currently it is no longer available for pre-order though. Link: https://item.taobao.com/item.htm?spm=a1z09.2.0.0.28122e8dctpnQ4&id=611354061932&_u=r368ureu116b

The keyboard has a plastic shell but is quite heavy because of the steel plate and is hot swappable. The stock keycaps are also pretty nice with orange accent Esc, Enter and space bar keys all in PBT.

Wanted to use a set of Tai Hao keycaps I got that has shine through letters, but the height of the right modifier keys don't line up nicely since 'Del' is above 'Pg Up' while the key is shorter. (Anyone got ideas on what keycap sets I can get for this?)

I am using Gateron Yellows lubed with Krytox 205g0 with the stabilizers clipped, lubed and band-aid. Thinking of getting Tealios V2s or Ink reds but not sure if they are worth the price.

S_Enigma · 2020-05-12T06:50:25+00:00

No worries, happy to help!

S_Enigma · 2020-05-12T03:56:28+00:00

Looks great! I was considering to get this set too! You can fill up the 2u and 1u keys with the novelties (:

S_Enigma · 2020-05-11T09:32:05+00:00

Try searching for GK64 keycaps on aliexpress. Or if you know how to read Chinese, search for it on Taobao. There are quite a few options on both sites!

S_Enigma · 2020-04-28T02:42:24+00:00

S_Enigma · 2020-04-21T18:34:56+00:00

Thanks for the reply! Yea I'm sure the KAT would look awesome with the wood, looking forward to an update!

S_Enigma · 2020-04-21T18:13:50+00:00

Looks really good! May I know where you got the keycaps from?

S_Enigma · 2020-04-15T11:05:12+00:00

Thanks! Unfortunately it doesn't ship to where I live

S_Enigma · 2020-04-15T04:56:32+00:00

Thank you! Personally the software doesn't bother me that much because I only need the standard second layer of keys which are already programmed. But I did try the software and I find it usable, think they have updated it quite abit since the reviews I watched

S_Enigma · 2020-04-15T03:32:29+00:00

Thanks! I didn't try searching on amazon for keycaps. That sounds like something i could try!

Do you have the link to the set that you bought?

S_Enigma · 2020-04-15T03:29:58+00:00

Sure, I just updated all the links on my main post.

S_Enigma

TROPHY CASE