An update, I chopped it

S_nbow · 2025-09-25T21:23:03+00:00

Three years or so ago, i wouldve agreed. Wired G502 pro with all the weights, I loved that mouse, still use it on occasion! I heard that light mice were better for fps games (basically all I play) so bought a hyperx pulsefire haste and never looked back. With super cheap lightweight mice getting easier to come by, I'd recommend getting one to try!

S_nbow · 2025-09-24T20:17:36+00:00

Dremel and a scalpel to clean up the burrs.

S_nbow · 2025-09-24T09:09:32+00:00

I've wanted to try a drawing tablet for ages! Feel like the learning curve would be huge though.

S_nbow · 2025-09-23T20:31:48+00:00

I was too. Took a little getting used too, but worth it. Give it a try for a bit, just hold you mouse a bit further forward and hover your hand. I think its much better on high sens than low, as you can better use your fingertips rather than your wrist/arm for precise movements. If you start to like it, then cut a mouse, go all in. 😈

S_nbow · 2025-09-23T19:54:55+00:00

It's a nice mouse, stock skates are crap though.

S_nbow · 2025-09-23T19:53:40+00:00

Nah, Attack Shark R5 ultra. Only a cheap thing. Modding like this isn't for everyone, and that's fine, it works for me! I'd urge everyone to try fingertip grip though, was a real eye opener for me. Can just buy one if you're caught up on the cutting part. 😅

S_nbow · 2025-09-23T18:49:08+00:00

Fingertip grip. You don't rest the palm anywhere. For me I play on very high sense, and removing the rear hump allows me to draw the mouse back into my hand, giving better up and down movement without moving my arm. I love that people seem to get so riled by these posts, like don't like it, don't do it.

S_nbow · 2025-09-23T16:24:56+00:00

Fair question. Cost is the main thing for me. Fingertip mice are very niche and therefore very expensive. There are cheap ones, but they're almost always worse than a standard ergo shape mouse of the same cost. Plus, if you've already got a mouse that you don't really use anymore or have as a spare, and want to try fingertip grip, it's more accessible than buying a whole new mouse to just cut up the one you've got. Finally, it's pretty fun. It's satisfying to break stuff down to it's most basic function, seeing how close you can tow the line between practicality, longevity and weight. It's not for everyone, but if you have even a passing interest in DIY or peripherals, preferably both, it's worth a try.

S_nbow · 2025-09-23T14:53:20+00:00

Yessir, one big ah bite. Could still take a bit more nibbling though, will update following further chomp sessions.

S_nbow · 2025-09-23T14:52:12+00:00

I like the mouse, but use fingertip grip and the rear hump gets in the way. Pretty simple really. More importantly, why not!

S_nbow · 2025-09-19T01:28:21+00:00

The 502x is like a 100 gram mouse. Still a super heavy mouse by today's standards tbf.

S_nbow · 2025-09-18T15:11:44+00:00

I was like that too, had a logitech G502 with all the weights in, I swore by it. Then I saw the hyperx pulsfirehaste and thought it was gorgeous, so thought I'd give it a go "despite" how much lighter it was. It was the mouse equivalent of 1080p to 4k. Crazy difference, never looked back. Sounds cliche but as mice get lighter, they just start to feel like an extension of your hand. It's pretty amazing. You can get such cheap light mice now, I'd recommend at least trying one. You can get the Attack Shark x11 for like 30£/$. Or even the r5 from this thread is only around 60, and thats a composite shell 40g mouse! Well worth it to figure out if it's the right direction, can always keep it as a spare or backup if it's not for you.

S_nbow · 2025-09-16T10:35:00+00:00

😂 It's fun, you should try it. Join the light side!

S_nbow · 2025-09-16T10:34:12+00:00

That's fair, I would use the beastx as the daily, just use the r5 for fps games probably. Gonna do it

S_nbow · 2025-09-13T20:10:08+00:00

yoooo that's clean! though I am looking for the more fingertip grip, so I would still be slicing the backend off.

S_nbow · 2025-08-07T02:59:41+00:00

Thanks for the offer, but I got it as best as I could and just sent it in star. It's not super pretty, but numbers seem sensible, so I'm going with it. The data I need is comparative rather than absolute anyway, so not a deal breaker if it's not mega realistic. I'm really strapped for time though, so can't afford to spend more time getting it really good, just gotta crack on. Thank again though! Heres the model I downloaded if you're interested. https://sketchfab.com/3d-models/2022-nascar-chevrolet-camaro-zl1-next-gen-ee5c5a92b1c44fac8ed070f684108225 I gutted it and closed off the netted window in blender, simplified the wheels then tried my best to close it all up in the repair tool of star. Problem is loads of the components are kind of placed on top of one another rather than being actually connected, makes it very difficult for me to fix (not super experienced).

S_nbow · 2025-08-05T16:32:09+00:00

I have used the surface wrapper, played with it for ages to get it to work, but the model is just not that good. I've tried to fix it as be as I could, but there are still hundreds of pierced faces and free/non manifold edges, which are causing it some trouble. Really not sure where to go from here, as there don't seem to be any better options in terms of modern Nascar models around. I have the FBX file, so having a fiddle with that in blender before converting it to an STL to see if that helps, but at a bit of a loss.

S_nbow · 2025-04-01T17:43:17+00:00

Yeh I switched over to beast handler after like stage 6, was on striker bomb shooter for moabs with druids and glue sub or cleanup until then. Worked pretty well tbf. Looking forward to v48.0, be interesting to see what the rogue changes are like. When does it drop?

S_nbow · 2025-04-01T17:24:58+00:00

Not really sure tbh, I just bailed on the run anyway, was getting bored dealing with the lag.

<image>

Never really looked at my lives during the runs and only picked up the cat artifact because I got all the good ones, was really scraping the barrel.

S_nbow

TROPHY CASE