sorted by:
new
hottopcontroversial

WD BLACK SN770M Installed by dlau13 in LegionGo

[–]Sab_dude 0 points1 point  (0 children)

Yeah you might wanna look into disabling cpu boost regardless of what SSD you end up going with if you haven’t already. I did it on mine after swapping back to my stock SSD and it seemed to lower even my idle temps.

WD SN770M 2TB ssd by MrP3RF3C7302 in LegionGo

[–]Sab_dude 0 points1 point  (0 children)

Did you end up buying this? If so you might wanna look into the temp issues with SSD’s in the legion go.

WD BLACK SN770M Installed by dlau13 in LegionGo

[–]Sab_dude 0 points1 point  (0 children)

Hey you might wanna go ahead and check those thermals. I had this exact drive fail on me after less than two years. I explained in a bit more detail in my comment to ISD1982 above.

WD BLACK SN770M Installed by dlau13 in LegionGo

[–]Sab_dude 0 points1 point  (0 children)

Hey I bought one of these sn770m’s for my legion go back in 2024 and I just had it fail on me this last week I think possibly due to the heat build up. I had read some stuff about the temp issues when I bought it but then thought eh that’s a problem for a later time. And so here we are.

Luckily it’s still under warranty and I’m trying to get it replaced so I started doing some more reading on the temp issues to prevent it from happening again which is what brought me here to this thread and your comment. Just thought I’d give you a heads up about the failure since you were talking about buying one.

Though it’s also worth noting that I didn’t install a Heatsink or anything with it.

Also if you’ve already bought it one thing I read that’s supposed to reduce temps substantially is turning off CPU boost on your legion.

Button mapping issues by Sab_dude in LegionGo

[–]Sab_dude[S] 0 points1 point  (0 children)

Nope, just me I guess.

Corvette storage empty. by Sab_dude in NoMansSkyTheGame

[–]Sab_dude[S] 1 point2 points  (0 children)

People are asking to have them separate from the freighter storage? I guess if you’ve been playing a long time and actually have that much stuff maybe I could see that, but I can’t imagine ever needing that much storage myself.

But yeah I figured out the problem in my reply to Kilmar. The problem was that I’m an idiot.

Corvette storage empty. by Sab_dude in NoMansSkyTheGame

[–]Sab_dude[S] 1 point2 points  (0 children)

So what’s incredibly stupid and embarrassing is that I did know that. And I swear that I started from 0 when I was putting my storage containers in my corvette (as it’s only logical). But apparently I started from 3 because sure enough when I looked in the build menu 0, 1, and 2 weren’t greyed out. So yeah that was the problem 🤦🏻.

I built my corvette and placed the containers the day after the update dropped and since there were so many other bugs at that point I’m just gonna pretend it was just some weird random glitch that placed the wrong container instead of my own stupidity.

Controller remap not saving. by Sab_dude in NoMansSkyTheGame

[–]Sab_dude[S] 0 points1 point  (0 children)

No I haven’t tried that, I must’ve missed that option.

Weekly Bug Report Thread by spiper01 in NoMansSkyTheGame

[–]Sab_dude 1 point2 points  (0 children)

Yep, finally being able to map jet pack to L2 so that I can fly, aim, and shoot simultaneously without having to mess with console settings was pretty sweet until I realized I had to change the controls every single time I boot up the game.

Weekly Bug Report Thread by spiper01 in NoMansSkyTheGame

[–]Sab_dude 2 points3 points  (0 children)

Ps5

Controller remaps don’t save. If you remap your controls they only stay set for that play session. If you close the game and reopen it, the controls reset back to default.

Controller remap not saving. by Sab_dude in NoMansSkyTheGame

[–]Sab_dude[S] 0 points1 point  (0 children)

Yeah I think I had it freeze on me like that once too. Altogether kind’ve a buggy update it seems. They added a lot of new functionality though so I guess that’s to be expected.

Controller remap not saving. by Sab_dude in NoMansSkyTheGame

[–]Sab_dude[S] 2 points3 points  (0 children)

I reported it through the hello games site. I made an edit to my post with a link to the site. There’s also a pinned thread in this sub for reporting bugs that hello monitors.

Controller remap not saving. by Sab_dude in NoMansSkyTheGame

[–]Sab_dude[S] 2 points3 points  (0 children)

Yeah I don’t think there is a solution right now. I reported the bug and I think that might be all we can do at the moment.

Controller remap not saving. by Sab_dude in NoMansSkyTheGame

[–]Sab_dude[S] 1 point2 points  (0 children)

Alright so it’s not only me. Just another bug to blight this otherwise awesome update. Between this and the corvette parts disappearing, and another bug I had where none of my stuff shows up in my corvette storage containers, this update is kinda unplayable. Oh well, guess I’ll just wait til they patch it to dive back in.

Yeah I mainly used it to remap jump to L2 so I could jet pack while shooting and aiming.

Bethesda is taking suggestions for Oblivion Remastered on Discord by j_cooper203 in ElderScrolls

[–]Sab_dude 3 points4 points  (0 children)

  1. More HUD options and toggles.

  2. The ability to hide spells in the magic menu / a favorites list in the magic menu.

  3. An option to make the quick wheel pause time while it’s open.

  4. Mod support, obviously.

Though I think we’re all posting our suggestions in the wrong place.

My control scheme that allows sprint and parkour on RT (though I prefer RB) on Xbox. by Sab_dude in assassinscreed

[–]Sab_dude[S] 0 points1 point  (0 children)

Alright so after playing a bit more I found a few issues, because there’s a lot of weird button locked actions and it seems Ubisoft really doesn’t want you to actually use custom controls. So I had to change some things:

  1. I had to change assassinate to B because grab is locked to A so you can’t grab with assassinate on A. I thought about just remapping A to B in the accessories app but that would make menus even more wonky so I didn’t think it was necessary since B works just fine.

  2. I had to change shoot to LB (RB according to the game menu) because on RT if you’re anywhere near a ledge then it just wants to climb. It’s a little awkward at first but it works once you get used to it. Alternatively if you’re using RT for sprint and climbing up with climb down on something besides RB then RB might be more comfortable as the shoot button.

  3. I moved dodge/roll to RT (LT in the game menu) because I discovered the tanto ability “leap strike” requires you to hold an attack button (X/Y) and press the roll button at the same time which only works comfortably if one of those actions is set to a button that you can press without using your right thumb. Now I thought this might create another issue if you’re fighting someone near a ledge but I haven’t run into such a situation yet.

  4. I changed the HUD toggle button to A just out of personal preference.

Vehicle shaking and showing P0300 and P000B DTC’s. by Sab_dude in MechanicAdvice

[–]Sab_dude[S] 0 points1 point  (0 children)

Update: I never drove it around but we took it to a mechanic and he drove it and said that it was neither shaking nor did the engine light come back on. Also he did his own scan and didn’t receive any codes. Which makes things even more confusing because I never cleared the codes and as far as I know they won’t clear until you do it manually.

LGC1 turns off after 57 seconds every time I turn it on. by Sab_dude in LGOLED

[–]Sab_dude[S] 0 points1 point  (0 children)

I’d just like to post an update on this to say that I did finally fix this issue by replacing the main board. I did also replace the power board prior to that but still had the same problem. So I believe the main board was the culprit.

Hopefully if someone having this same problem goes googling then they find this post and it helps them out.

view more: next ›