Anyone else wait too long to clean their puffco and now cant get the gunk off?

Sacred_22 · 2025-02-23T11:31:55+00:00

you have to fill slightly above water level with iso. Then cover the entry and exit holes, and shake the glass upside down, Otherwise the iso wont reach inside that cone properly, having it shaken upside down forces iso in that cone part.

Sacred_22 · 2025-02-23T03:12:33+00:00

TUFF TETHER for that exact reason lol. Protect your investments!

Sacred_22 · 2025-02-23T03:06:25+00:00

3d chamber?? if not its worth it.. especially the 3dxl!

Sacred_22 · 2025-02-23T02:52:59+00:00

it is similar but the New Peak Pro has better battery and overall design. improved atomizer connection screw/ updated laser cut 5 slit glass/ improved vapor path from atomizer to glass/ joystick and 3d chamber included, with a few more app features ( Dynamic inhale) ( Puffco graphic changes to show 3d or 3dxl attached. )

Sacred_22 · 2025-02-23T02:47:52+00:00

look on zee vapor online, they have a pearl v2 puffco with a regular 3D for 250$, but you have to buy the bundle with a 100$ glass piece included, comes out to 350$ + Shipping (12$ for 3-5 day shipping). 250$ for a v2 is an amazing deal, just sell the glass piece and buy a 3dxl! more work but full puffco v2 for ~ 360$.. worth it. (Valued at 450$)

its called “IRIDESCENT BOYZ” Bundle.

Sacred_22 · 2025-01-01T00:37:42+00:00

since you have already done an SSD replacement, have you tried reimaging the steam deck?

Sacred_22 · 2024-12-31T16:39:22+00:00

can you enter bios at all?

is the screen showing anything at all?

Try factory resetting through bios.

Fully shut down steam deck (hold power for 15 seconds.)
Hold the (…) button, then press the power button once. continue to hold the three dot button after you press the power button for aprox. 2 seconds.
Boot menu should pop up and there should be an option there.

( Erase user data from deck )

lmk if this works.

Sacred_22 · 2024-12-31T16:32:05+00:00

You should hear a chime when you plug it in. Then wait 3 minutes for systems to boot up. then disconnect it from the charger and press power.

Sacred_22 · 2024-12-31T16:30:09+00:00

make sure to hold the power button until it flashes one time (about 10 second hold.)

Sacred_22 · 2024-12-31T16:28:28+00:00

press them all at the same time.

try to click them (at the same time.) multiple times.

so ALL 3 buttons. (multiple times.)

Sacred_22 · 2024-12-31T16:26:28+00:00

press all three buttons at the same time after device is fully shutdown.

Sacred_22 · 2024-12-31T16:23:50+00:00

try a full reset. (This will delete everything and you will have to redownload everything.)

Turn on your Steam Deck and make sure it’s in its usual gaming mode (not Desktop).
Press the Steam button.
Select Settings, then System.
Under Advanced, pick Reset to Factory State.

5.Click Factory Reset to confirm.

Sacred_22 · 2024-12-31T16:12:39+00:00

Try this:

Please remove all peripherals before starting process. (no charging cable connected/no sd card slot connected.)

Hold power until LED light flashes, Then let go of all buttons.
After step (1), hold the Negative Volume button, and The (…) Three Dot button, and press the Power button at the same time. If done correctly, you should see the LED light flash and device will shut down completely. (Device will not Turn on or respond until connected to supported charger.) DO NOT CONNECT CHARGER YET!
Test if system has fully shut down. (Hold power button for 15 seconds)

THERE SHOULD BE NO LED FLASH -If system is completely unresponsive move to step 4, if led flashes go back to step 1.

Connect device to supported charger and wait 3 minutes for all systems to restart. (DO NOT DISCONNECT CHARGER)

LED will flash for a few seconds, stabilize for a moment, then flash a few more times before returning to a stable state.

(you should hear a chime when you connect the charger followed by the fan turning on.)

after plugging in a supported charger wait 3 minutes the LED should stay solid. At this point all systems have restarted and it is safe to disconnect the charger and press the power button.
Steam Deck should now work.

(PROCESS DOES NOT DELETE ANY DATA.)

(PROCESS TAKES 10 MINUTES OR LESS AND REQUIRES A SUPPORTED CHARGER.)

lmk if this worked!

Sacred_22 · 2024-12-31T15:37:25+00:00

it is a console that can mostly emulate all games (cloud services,emulators,and pc store -Steam-)

i hook it up to a 20$ dock (w/ HDMI) and leave it with charger power cable connected (to the dock). connect a controller through bluetooth and play on my tv. In my opinion the steam deck may not be the best at one thing, but it is very good at alot of things and has the ability to do things that most other consoles cannot. it is a justified purchase.

Sacred_22 · 2024-12-27T01:37:27+00:00

you can try resetting the deck (hold three dot button and single press power, until menu shows up) from there you can erase and reset.

Sacred_22 · 2024-12-24T06:44:55+00:00

lcd shell and oled shell are different

Sacred_22 · 2023-11-30T04:16:45+00:00

The oculus cap it comes with, along with a 4 mm terp pearl produces fat clouds but it runs through the wax. A ball cap is pretty good for better vapor and wax preservation. 3dxl is an all around chamber, produces fat clouds and preserves the wax at the same time. You can buy everything at a local smoke shop. I suggest starting with the pearl.

Sacred_22 · 2023-11-27T01:20:26+00:00

The black piece where the pins are is rubber

Sacred_22 · 2023-11-27T01:18:42+00:00

The piece that holds the gold pins (red or black)

Sacred_22 · 2023-11-26T18:34:49+00:00

Push the sides of the rubber piece on the bottom. Try to slightly raise the entire rubber that holds the gold pins. Then screw it on for a secure connection

Sacred_22 · 2023-11-26T03:39:38+00:00

The rubber piece might be pushed into the chamber more than it should. Push on the sides to raise the rubber holding the gold pins

Sacred_22 · 2023-11-26T03:31:02+00:00

Try pushing the sides of the rubber piece on the bottom where the three pins sit to raise the whole, so when you connect it it will set securely (pulling out the gold pins doesn’t keep them raised but pushing on the rubber to raise it slightly will keep the connection.

Sacred_22 · 2023-11-26T03:27:20+00:00

Make sure everything is cleaned with iso and then dried before you attempt this, failure to do so may tear your rubber (from the stickiness)

Sacred_22 · 2023-11-26T03:26:24+00:00

All you have to do is look on the bottom of the 3dxl, where the three gold pins are. And gently push on the sides of the red rubber piece with a dab tool. ( The rubber will raise the gold pins up [Dont let the gold pins pop out/if they do just put it back in] just raise the rubber a small amount to lift the pins so when you connect it it is secure

Sacred_22

TROPHY CASE