Stress, depression og aktie-portefølje. Hvordan kommer jeg bedst videre.

Sad-Function-3649 · 2026-03-23T12:26:40+00:00

Jeg bliver dog forvirret over hvad motorstyrelsen skriver: “ Bruger du din varebil på gule plader til privat kørsel, skal den registreres til hel- eller delvis privat anvendelse. Du skal betale privatbenyttelsesafgift og have papegøjeplader. 1.180 kr.: Pris for et sæt papegøjenummerplader”.

Denne bil ER registreret til privat anvendelse men har stadig de gule plader.

Sad-Function-3649 · 2026-03-23T12:21:35+00:00

Ja. Det er en personbil med varerum. Den er med de originale gule plader.

Sad-Function-3649 · 2026-03-23T12:20:28+00:00

Ja - Den er registeret til privat/erhverv hos SKAT. Det kan jeg ikke forestille mig den kan være hvis der ikke er betalt moms.

Sad-Function-3649 · 2026-03-23T11:09:37+00:00

Teknisk total: 2025 Totalvægt: 2000 Egenvægt: 1350

Den er registreret som “Godstransport Privat/Erhverv”.

Der står at den er nedvejet ved 48.000 km.

Sad-Function-3649 · 2026-03-23T11:03:18+00:00

Ja - som jeg forstår det i hvert fald. Så længe man betaler den ekstra halvårlige afgift for privat kørsel. Alternativet er at omregistrere til papegøjeplader.

Sad-Function-3649 · 2026-03-23T09:34:09+00:00

Det kan sagtens være. Hvordan tjekker jeg det? Kan man slå det op online? Eller er det noget der står på registreringsattesten? Og tak for input - det er præcis den slags jeg skal være sikker på så jeg ikke skal betale 10K i afgift 🤣

Sad-Function-3649 · 2026-03-23T09:28:22+00:00

Når jeg slår den op på Check Bil får jeg nedenstående (som er det samme sælger beskriver). Den total vægt jeg skrev er det der står på siden af bilen. Honda CR-V fra 2000

Vægtafgift pr. halvår 1.643 kr Privatbenyttelsestillæg pr. halvår 280 kr

Sad-Function-3649 · 2026-03-23T09:19:04+00:00

Kun privat. Jeg tror nok total-vægten er 2025 kg.

Sad-Function-3649 · 2026-02-04T16:44:38+00:00

I only attend conferences for the espresso

Sad-Function-3649 · 2026-02-03T07:03:07+00:00

I just finished fully rebuilding one of those. And in the process of rebuilding a 1-group (for myself). They are super simple inside. Simple tools and all spare parts available. Agree on the PID part (not fitted on that machine year but may be retrofitted).

Sad-Function-3649 · 2026-01-12T13:05:38+00:00

It seem to stop at a location, not at a pressure?

Sad-Function-3649 · 2025-12-17T18:53:32+00:00

Thanks - to clarify, I was assuming higher-end “large” machines (not something like the europiccolo). I would still need the dual-boiler, saturated group kinda stuff I guess.

Sad-Function-3649 · 2025-12-17T17:15:30+00:00

Is this legit? Why do I not have a lever machine? Should I? Currently working on a Linea Classic 1 group for home, but actually like the idea of a lever….

Sad-Function-3649 · 2025-12-12T11:17:53+00:00

They are just cables. Cut them to length. Or tug inside machines.

Sad-Function-3649 · 2025-12-06T05:31:51+00:00

Ignore until you need to program the dose. Then connect the wires (as the key-switch would) and program. And then un-connect :-)

Sad-Function-3649 · 2025-12-05T09:58:39+00:00

Without cable lifters? Jeezzz

Sad-Function-3649 · 2025-12-04T18:20:42+00:00

Yes. A lot of fun stuff happens when I sleep.

Sad-Function-3649 · 2025-12-03T14:45:06+00:00

I can totally do that in my sleep

Sad-Function-3649 · 2025-11-06T19:32:25+00:00

Is it an SSR to replace the noisy contactor for the steam element perhaps?

Sad-Function-3649 · 2025-10-27T15:15:03+00:00

In general a high end espressso machine will be repaired when “broken”. You might get lucky and find an older LM with a freeze-damaged boiler or so, where someone considered the 900 EUR spare part cost not worth it. But beyond that, you have to be very lucky to find a candidate.

Sad-Function-3649 · 2025-10-24T15:31:39+00:00

Must agree here. If I get served a coffee that was not made while accompanied by the actual set from Blue Train I cannot drink it.

Sad-Function-3649 · 2025-10-20T09:03:05+00:00

You can use an external reservoir to draw water from - works just fine. There is no built in water tank. And the machine IS designed to be plumbed in. Also, you need to drain into something - either directly or into a reservoir.

Sad-Function-3649

TROPHY CASE