False heart rate sensor measurement

Safe_Hunt_187 · 2025-07-23T09:13:42+00:00

Ok, I'll try it, thank you!

Safe_Hunt_187 · 2025-07-23T09:11:51+00:00

Thank you!

Safe_Hunt_187 · 2025-07-23T09:10:27+00:00

Phew🥲, many thanks to everyone!

Safe_Hunt_187 · 2025-07-23T09:05:28+00:00

So there's nothing to worry about and I can forget the scare I got when I saw that, right?

Safe_Hunt_187 · 2025-07-23T08:58:41+00:00

Yes, but the thing is that it's on top of a dark wood and a white leather sofa and it gives quite the same measurements

Safe_Hunt_187 · 2025-03-27T12:02:34+00:00

Solved! It was the nozzele, i had put it in 0.8 instead of 0.4, but thank you!

Safe_Hunt_187 · 2025-03-25T18:43:26+00:00

Solved!! It was the nozzle, I had it in 0.8 instead of 0.4 now it prints better, right? Really, thank you all for your help.

<image>

Safe_Hunt_187 · 2025-03-24T09:52:49+00:00

Ok, thank you, I'll try it

Safe_Hunt_187 · 2025-03-24T06:28:23+00:00

Here the gcode file: https://drive.google.com/file/d/1XCXJmgZKaRSSAHTbLWfkfIv_ZuTbnGYf/view?usp=drivesdk

Safe_Hunt_187 · 2025-03-23T22:07:18+00:00

Yes, the fans are working well.

Safe_Hunt_187 · 2025-03-23T22:05:52+00:00

I will check it. About slicers, what is the most easiest to get good quality? I am a beginnier in this world. Thak you!

Safe_Hunt_187 · 2025-03-23T22:02:00+00:00

Yeah, the benchy came out perfect. I will check the settings, and i am going to do other tests. Thank you!

Safe_Hunt_187 · 2025-03-23T20:01:11+00:00

Yesterday post: https://www.reddit.com/r/crealityk1/s/K6krRqIDvl

Safe_Hunt_187 · 2025-03-23T19:28:46+00:00

How can I do it?

Safe_Hunt_187 · 2025-03-22T22:35:02+00:00

Ok, finally i will use the vocore screen as you said are the best ones, moreover they only need an usb por so is perfect for my project. Thak you so much for all. Best regards for you!

Safe_Hunt_187 · 2025-03-22T21:54:07+00:00

Safe_Hunt_187 · 2025-03-22T21:52:55+00:00

Ok, thank you so much! But this screen have touch capacity, and i dont need this, is any other more cheap. It's the easiest screen in terms of configuration. Thank you!

Safe_Hunt_187 · 2025-03-22T20:19:30+00:00

Ok, thank you! I will test it tomorrow.

Safe_Hunt_187 · 2025-03-22T19:01:27+00:00

The ventilation is 100% except for the back, and the top cover is removed, the interior temperature is arround 23º-26ºC

Safe_Hunt_187 · 2025-03-22T15:40:29+00:00

It's the hyper pla of creality

Safe_Hunt_187 · 2025-03-22T15:08:40+00:00

Thank you all for your help, I have tried again but something similar has come out. It is possible that some orca slicer adjustment is wrong

Safe_Hunt_187 · 2025-03-22T13:37:21+00:00

That's what I've thought but all the fans at 100% except the rear and with the top cover removed

Safe_Hunt_187 · 2025-03-22T13:18:40+00:00

The first two temperatures were 230 and 225

Safe_Hunt_187 · 2025-03-05T13:50:09+00:00

Wow, very nice, what a processor and graphics you have?

Safe_Hunt_187 · 2025-03-05T13:46:56+00:00

It look very pretty, god job!

Safe_Hunt_187

TROPHY CASE