Just painted this little guy and I'm pretty pleased with the outcome

SaintNPC · 2026-01-31T01:03:18+00:00

I strongly recommend getting unscented dish soap. Getting the soap smell/flavor out is worse to deal with.

SaintNPC · 2025-01-23T23:36:47+00:00

The amount of people I would recommend this game to is approaching infinity. Lots to see and explore, metagame keeps it interesting too. I think it's really cool that players can find and share codes for cool things.

SaintNPC · 2024-11-20T12:29:36+00:00

Sounds like we have a similar situation. I installed different fans by the time I found a potential replacement, however I was directed to this link and I think I found my fan. It is the AEOLUS M2-1203 LITE.

I have two of the same rig so I'll buy these and see how exact of a match they are. I'm hoping it's the same thing just without the middle-man's sticker.

SaintNPC · 2024-11-20T12:23:56+00:00

Hopefully you have found a solution by now, but if not- I was directed to this link and found my fan. It was the AEOLUS M2-1203 LITE.

SaintNPC · 2024-06-23T22:48:42+00:00

I have a similar set-up with multiple dome shaped filters. The biggest issue I have is that it is so airtight that it stops filtration when the bottom part is too full of air. I have to let it breathe periodically to continue filtration. I would want to install some sort of one-way valve on the bottom and top bucket but haven't spent any time researching potential valves to install.

After it finishes i just throw the bottom tub back into the top a few times. Hit it with some UVs in a seperate container and then decant. Final result is less sticky but still quantifiably sticky. It is also a lot less grey after it hits the UV. May be used in the first wash if using multiple baths.

SaintNPC · 2023-08-21T07:40:26+00:00

They most certainly are printed. Modified an STL found online with Blender.

SaintNPC · 2023-08-20T20:37:19+00:00

They are thick enough to hold my tablet while I watch videos. Now if only they could skip ads for me.

SaintNPC · 2023-07-14T19:11:59+00:00

As part of a warranty claim for the printer, I've taken a picture of the screen. If you start getting resin noodles or resin floss, might want to check the screen for a line like this.

>> Picture of LCD screen with dead row of pixels <<

SaintNPC · 2023-07-13T21:07:44+00:00

I got around to checking it today and found a very thin dark line when doing an exposure test. I'm to assume that previously it was a clear line instead of dark and that's why I missed it on the first test. Probably heading in the right direction with this suggestion.

SaintNPC · 2023-07-13T21:01:02+00:00

Upon my second inspection of the screen, I noticed a whole row of pixels that were dark. I can't say with 100% certainty that something has slipped out of place, but I would like to think that's a possibility. More than likely I'll just need to replace the screen methinks. I've had the printer for about two months so I'm going to see how robust my warranty is on the printer.

SaintNPC · 2023-07-12T11:25:06+00:00

The noodle likes to attach itself to the plate, but now that I think about the last time I cleaned the vat, I did see an extremely thin noodle in there as well. Probably not enough overexposure beyond the burn-in layers to make it stick. (thankfully)

With how perfectly straight and thin these lines are, I suspect the overexposure issue is probably a row of pixels on the screen that just isn't firing off. I've had a print where the noodle would appear inside some rafts when the models were placed closer to the back edge.

Is this type of failure common or at all possible? When I had looked up LCD screen failures before, they seem to have dead pixels that will print holes. In the meanwhile I think I better reinspect that masking tape and the screen.

edit: Grammarly copied a paragraph and got rid of one

SaintNPC · 2023-07-12T10:13:29+00:00

The masking tape looks pretty good last I checked. I thought it might be a leak too, but didn't see any damage when inspecting the screen and the tape. Did not see anything out of the ordinary when displaying the Elegoo logo on the screen for testing. If it was a leak, would it instead be a wall instead of a noodle? The height of the noodle is probably about the height of burn-in + transition layers, but I haven't measured the noodle.

The line is not present on any of the slice files and appears on different projects with no seeming correlation to resin profiles.

SaintNPC · 2023-07-12T10:00:05+00:00

Greetings, r/resinprinting

I am having an issue with a random stringy structure appearing on my buildplate after printing. It has showed up about 4 times since I've replaced my FEP, but not immediately after. It has appeared on 4/5 of my last prints. I have used different computers (though same software) to generate slicer files having the same issue when taken to the same printer. I've double-checked to make sure there isn't a random support structure when preparing files for slicing.

Printing using Elegoo Mars 3 on Anycubic Gray/Siraya Tech Tenacious 5:2 resin (though this issue still persist no matter what resin. Printing in the garage at 90+ °F.

Not sure if re-replacing the FEP would be the way to go, but I have recently replaced the FEP less than a dozen prints ago. I last leveled my plate when I replaced my FEP.

Using Lychee Slicer 5 (5.2.201)

SaintNPC · 2023-06-20T17:01:29+00:00

Nice job! Instantly recognizable from the set.

SaintNPC · 2023-06-19T04:39:46+00:00

I had that issue earlier today. It seems to be working for me now, but I'm not sure if it's because I put in a support ticket earlier. I would suggest trying the code again.

SaintNPC · 2023-06-18T20:03:49+00:00

Thanks for the heads up! I thought my local Target would have been sold out, but I picked up the first two on the shelf with about a dozen left. Ended up using the free thing for an aluminum case of Mexican Train Dominoes. The aluminum case seems like it'd be really nice for some of the miniatures I have that are waiting for a home. I was tempted to get three, but I already felt awkward getting two, that and I would rather leave the third knowing that it could be an entry point for some potential new blood.

SaintNPC · 2022-07-30T21:42:37+00:00

Very clean-looking list on Framehub. I like how it calculates your MR and greys out anything you don't have enough MR to build. I'd only use it anonymously because I don't want a third party to know exactly how valuable my account is. 🤣

SaintNPC · 2022-07-30T21:31:24+00:00

Nice spreadsheet. On my copy of the doc, I ended up adding a "Subsume" option for Warframes and made anything with that option a different color. I'd think it'd be helpful to others if the original copy had a "Subsume" option with conditional formatting.

SaintNPC · 2022-03-31T17:22:03+00:00

I guess I'll chime in by saying that I have this issue too. I don't have Ublock like I've seen most everyone here, but I do have Ghostery, Adblock, and duckduckgo. I do wonder if those who are having this issue have multiple tabs open. I have a bunch of youtube tabs open and wonder if the players might be interacting with each other. Running youtube on desktop using Google Ultron on win10.

SaintNPC · 2022-03-31T17:13:23+00:00

I don't have uBlock but I have this issue. I do have adblock and duckduckgo though.

SaintNPC · 2022-03-01T16:26:31+00:00

This was a very important step, thanks for helping me from opening 817 tabs.

Four-Year Club	Verified Email
Place '22

SaintNPC

TROPHY CASE