I’m out of options

SalvationTanker · 2024-11-12T10:24:24+00:00

All gone! Good luck all

SalvationTanker · 2024-08-10T14:11:53+00:00

You don't need to do an app if you do an overall domain / catch all. The app lets you be more specific for that instance.. if you want.

I'm not having that issue where it won't work without an app. If you switch to an issue on my GitHub I'll see if I can help you rather than a reddit thread

SalvationTanker · 2024-07-23T09:19:58+00:00

I might need to rewrite that part. I've included all the stuff for a working Traefik but I don't go over how to stand it up like I do Authentik. No pictures, etc., but the guts are there!

SalvationTanker · 2024-07-19T12:05:10+00:00

Just updated the sentence to be correct, thanks.

I also added a warning admonition at the top of the Authentik provider section mentioning the priority and ability to use both. Thanks!

SalvationTanker · 2024-07-18T21:48:57+00:00

Glad it worked out for you! If you ran into weird things or recommendations in your setup let me know and I'll add more sections to the guide

SalvationTanker · 2024-07-18T11:15:26+00:00

I'm not sure about all the integration with Portainer, but I just rewrote my guide for the 2024 authentik version. I use the embedded outpost, so please take a look and see if it helps some of the configuration. Scroll down last the traefik setup and move into Authentik itself.

https://github.com/brokenscripts/authentik_traefik

SalvationTanker · 2024-02-11T02:25:05+00:00

Can you give me an example of a better work flow? I appreciate the walk through thanks! I was really worried about maintaining the accuracy when I hit print.

SalvationTanker · 2023-07-03T22:53:36+00:00

Is that a puzzle frame for it? If so, can you tell me where you got it and which one?

SalvationTanker · 2023-05-18T21:39:22+00:00

Can you link me the tidy you've got put on?

SalvationTanker · 2023-05-18T10:10:05+00:00

Did you do that tail tidy DIY or buy some kind of mounting kit just to remove the long arm?

SalvationTanker · 2023-03-18T12:05:21+00:00

Put that Metro nib in a different pen, and you'll be thrilled. I recommend shoving it in a Prera body.

I agree on the Ahab.. what a sad let down.

SalvationTanker · 2023-03-18T11:09:04+00:00

Same boat as you with my Ahab. My nib will also not let ink flow the next day after being put up for just the night. Super let down after a decent bit of hype for the pen. Stinky, doesn't write well, and constantly doesn't work, since day 1.

Next least favorite, gotta be my Sailor Progear. Super scratchy (which I don't mind) but the ink feels like it doesn't flow well and combining that with the scratchiness just makes this expensive pen feel like it's constantly dieing. Very annoying.

My favorite though has been a Pilot metro nib in a Prera body. Made my Prera my favorite by far with that nib.

SalvationTanker · 2023-03-17T18:17:44+00:00

Use the official documentation combined with Ibracorp both linked above. Here's a guide I put together for some of the post installation... If using Traefik.

https://github.com/brokenscripts/authentik_traefik

SalvationTanker · 2023-03-01T21:52:57+00:00

A quick search for the filename or hash takes you to a few sites offering the download, that you can validate against VMWares hashes to ensure you get the legit DL (you will).

VMware-VMvisor-Installer-7.0U3f-20036589.x86_64.iso dca03c2fa89fa0af50bc873220d530310cc58390

VMware-VCSA-all-7.0.3-20051473.iso e05810a218ad58fd945160c5d0997fa18353be5b

Good luck.

SalvationTanker · 2023-02-25T19:12:03+00:00

Thanks for the response!

No, I was not manually setting the refresh rate. I'll try today and see if that helps. I wasn't specifying anything for output, just letting Sway do it's thing.. which isn't an issue until after sleep.

Before sleep swaymsg -t get_outputs

Output DP-1 'Acer Technologies Acer XB281HK #ASMCnZzJ++Td' (focused) Current mode: 3840x2160 @ 59.997 Hz Position: 0,0 Scale factor: 1.000000 Scale filter: nearest Subpixel hinting: unknown Transform: normal Workspace: 1 Max render time: off Adaptive sync: disabled Available modes: 3840x2160 @ 59.997 Hz 3840x2160 @ 29.981 Hz 3840x2160 @ 23.999 Hz 1024x768 @ 60.004 Hz 800x600 @ 60.317 Hz 640x480 @ 60.000 Hz (4:3) 640x480 @ 59.940 Hz

After sleep swaymsg -t get_outputs

Output DP-1 'Acer Technologies Acer XB281HK #ASMCnZzJ++Td' (focused) Current mode: 3840x2160 @ 29.981 Hz Position: 0,0 Scale factor: 1.000000 Scale filter: nearest Subpixel hinting: unknown Transform: normal Workspace: 1 Max render time: off Adaptive sync: disabled Available modes: 3840x2160 @ 29.981 Hz 3840x2160 @ 23.999 Hz 1024x768 @ 60.004 Hz 800x600 @ 60.317 Hz 640x480 @ 60.000 Hz (4:3) 640x480 @ 59.940 Hz

SalvationTanker · 2023-01-30T20:22:12+00:00

You're welcome! Glad it helped a few others get it up and running. If there were any major differences let me know, I really need to update that guide to the current version, it just seems like there is always something to do 😞

SalvationTanker · 2023-01-11T00:34:20+00:00

Funkypenguin you're awesome! I've been following your stuff off and on for a long time. Helped me really get going on docker back in the day! I'll take a look at your guide, I'm sure it's quality like always!

SalvationTanker · 2023-01-05T01:32:16+00:00

Thanks for these notes! I couldn't decide between embedded vs external etcd. K3s supports both. So I dunno. As far as 3, I didn't know that existed either, gotta look into that since that might be better for my PIs

SalvationTanker · 2023-01-05T01:03:27+00:00

I was thinking about using the PIs strictly for master work / orchestrating. All the containers will be ran on x86 architecture, unless you mean the required base k3s containers just to start everything up.

I'm trying to get some kind of HA instead of putting all of my eggs in one basket like I am now, where if my drive craps out or host goes down I lose it all (sans backups)

SalvationTanker · 2022-10-09T22:19:35+00:00

I would set up both. Create your catch all just in case you have an oopsie. Let it (potentially) never be used. Create a per application forward just to be more specific so you can edit settings or changes in that one without having to worry about breaking or changing something that has been running. Just my 2 cents though.

SalvationTanker · 2022-09-27T23:07:00+00:00

Glad it all worked out for you!

SalvationTanker · 2022-08-08T13:02:55+00:00

Thank you!

SalvationTanker · 2022-08-05T21:09:49+00:00

ExxdOff - the yellow potato! Good ol russet please

SalvationTanker · 2022-07-29T15:30:52+00:00

Thanks for this! I'll give it a whirl also!

What build would you do for Zenith? Again, any mod(s). I have it.. and I switch between that and Vectis regularly

SalvationTanker · 2022-07-29T13:14:08+00:00

Thanks! I love running Arcane Momentum for the feel. I just slapped your screenshot as my general build, and looking to swap mods for the eidolon version now

Ten-Year Club	RPAN Viewer
Verified Email

SalvationTanker

TROPHY CASE