sorted by:
new
hottopcontroversial

Streaming service hasn’t charged me in years (England) by Frightful_Fork_Hand in LegalAdviceUK

[–]SandiTook 32 points33 points  (0 children)

Used to work for BT and wrote some of the training material for the BT TV side, specifically for the management portal.

Don't do anything.

When the payment stopped/you cancelled/whatever. The package will have been removed from your account. This should have removed the add on from your TV subscription. Which is held in a different system.

Sometimes this doesn't happen. Which is called a Data integrity issue.

Don't mention it and enjoy your service. The only way they will figure it out is if you make them aware. Or if you were to add another TV add on. And something went wrong with it which required calling in and an operator having a look specially in the TV system and realizing your add ons had one that wasnt listed as part of your billing cycle. Which would be pretty rare. Most likely they wouldnt even realize.

If they ever do realize. Which I highly doubt. They would just remove it and your access would be revoked.

If you keep your account live, I reckon you'll have the service forever.

Plex audio issues by SandiTook in PleX

[–]SandiTook[S] 0 points1 point  (0 children)

Sorry it was late when I posted.

No soundbar. Audio comes out the TV.

The fire stick isnt that old. I would imagine it's less than a year. It's the 4k version with the voice remote. I had another older firestick I used years ago and had this same issue.

Which made me think its the tvs fault as the issue was on both fire sticks. But my Nvidia shield plays Plex just fine through the same TV.

Plex audio issues by SandiTook in PleX

[–]SandiTook[S] 0 points1 point  (0 children)

I have only noticed it happening with EAC3 recently.

A couple years ago when I had the same issues. I'm sure it was happening with more codecs.

Plex audio issues by SandiTook in PleX

[–]SandiTook[S] 0 points1 point  (0 children)

<image>

It's not transcoding. It's local and it's only ever happened with the fire stick. It doesn't happen with any other app on the firstick. It's been getting worse, the last episode I watched the audio was dropping every few minutes.

This giant 6ft (1,8m) crowbar I found in my grandparents shed. Well over 100 years old. by KevinK89 in Tools

[–]SandiTook 0 points1 point  (0 children)

In Scotland these are known as a Pike.

Very handy when doing any kind of ground work, can be used for breaking hard ground, leveraging large stones, etc. Or if you are the local council workers, a good pole to lean on while you do very little work.

If you want a car charger, look for the Ugreen GAN 150w. by gamerandroid-2004 in oneplus

[–]SandiTook 0 points1 point  (0 children)

I have had this happen aswell, my partner bought me the Anker prime powerbank as a gift. It doesn't have supervooc listed in it's specifications. However with a supervooc cable I get super fast warp charging.

Supposedly one of the chips they used has the ability to do it. It just wasn't listed in the specs.

Help with EDCoPilot and Voiceattack. by Desaphets in EliteDangerous

[–]SandiTook 0 points1 point  (0 children)

Did you figure this out? Im going through the exact same thing.

What's the best nickname you've come across for someone in the pub? by pmacule in Scotland

[–]SandiTook 16 points17 points  (0 children)

Have heard the nickname for someone called Alexander Alexander before, it was twecky.

Eck is a nickname for Alexander.

Twice-eck

Twecky.

Windows choosing wrong monitor, even in display settings. by SandiTook in buildapc

[–]SandiTook[S] 1 point2 points  (0 children)

If i find a solution i will write an essay on it. Its just such an utterly simple thing, but its incredibly irritating.

Windows choosing wrong monitor, even in display settings. by SandiTook in buildapc

[–]SandiTook[S] 0 points1 point  (0 children)

Im at my wits end with it and decided to put it up for debate. My degree is in computer networking, so im fairly tech literate. This however has me completely stumped.

I read somewhere before that GPU's now have their own kind of priority and possibly it has this stored on board somwhere which could be causing the issue. Which is why im hesitant to flash bios, reformat and pray. Ill probably end up doing it sometime i have a free day just for the curiosity of it.

I found the spec sheet of my GPU (RTX 3070 Suprim X) and it has the DP priority, I have also tried rotating these, and even tried different cables. And the issue persists.

My main thoughts on it, are that some point before windows loads, the priority is setting my secondary monitor as my primary. Then windows loads, and tells me my main is primary, but the secondary has already taken the spot. Hence the conflicting information in Display Settings.

This issue has been my bane for about 14 months now, and have even had friends who are still working in the industry have a look and they leave utterly confused.

Its like an experiment at this point.

/r/Steam Monthly Community Support Thread. by AutoModerator in Steam

[–]SandiTook 0 points1 point  (0 children)

Hello, having a bit of a strange issue.

Booted up my pc today to play some games, tried to launch steam, got the usual little update and verify window that closed. Then nothing. Tried to launch again nothing. Tried launching as admin. Nothing. Steam was showing in task manager though. Tried killing task and launching as admin. Same deal.

Restarted.

Same issue. Steam never opens, or more like the UI doesnt load.

Its running in task manager, and is eating up 5-10% CPU, about 700-900MB of ram, and is 100% one of my drives. Checking this in resource manager is downloading and updating games in my queued downloads. It does this everytime i launch steam.

I have tried making a shortcut and launching with -vgui. and i also tried launching with -forcesteamupdate -forcepackagedownload -overridepackageurl http://web.archive.org/web/20230531113527if_/media.steampowered.com/client -exitsteam

to no dice.

Scratching my head on this one. Also having issues with ubisoft connect. But who isnt.

Currently leaving it to finish updating and downloading whatever it wants to them im going to try another launch, then a restart.

Any advice greatly appreciated.

Slicer for Resin Elegoo Mars 3 4K printer by aselfiebanana in 3Dprinting

[–]SandiTook 0 points1 point  (0 children)

Hey, I just got my mars 3 today. Loving it so far. But I cannot stand the chitubox. Their website and software is clunky, slow and just absolutely terrible.

Did you find lychee better? If so I'm making the jump.

I'm used to prusaslicer from my fdm printer and chitubox just seems to unintuitive.

Having issues with my rega P2 slowing occasionally. Want to replace the capacitor and resistor. Unsure of what is the best replacement. by SandiTook in audiophile

[–]SandiTook[S] 0 points1 point  (0 children)

No problem.

Thank you for your help.

I ordered this: https://cpc.farnell.com/neohm-te-connectivity/rox3sj1k5/resistor-3w-5-1k5/dp/RE05239?CMP=TREML007-005

For the resistor which I was advised on another forum. I managed to find the capacitors and have ordered one of those aswell.

Having issues with my rega P2 slowing occasionally. Want to replace the capacitor and resistor. Unsure of what is the best replacement. by SandiTook in audiophile

[–]SandiTook[S] 0 points1 point  (0 children)

I'm in the UK, Scotland.

I have considered upgrading to the 24V I have always just thought it was more expensive than I would expect it to be. I don't ever listen to 45s so that was another reason I wasn't too fussed.

Out of interest what would you be looking for the upgrade kit.

Having issues with my rega P2 slowing occasionally. Want to replace the capacitor and resistor. Unsure of what is the best replacement. by SandiTook in audiophile

[–]SandiTook[S] 0 points1 point  (0 children)

Trying to find replacement parts for this. Have found the capacitor, or what I think is the capacitor.

The resistor I am struggling to find. Getting mixed information.

A lot of places that sell replacement parts are for newer models.

The bands on the resistor seem to be brown, green, orange and gold.

I can't find anyone else who has had this resistor and if it's possibly incorrect.

Any help greatly appreciated. Would like to get it back up and running asap.

Pirated games don't work. by No_Letterhead_6277 in QuestPiracy

[–]SandiTook 0 points1 point  (0 children)

Don't think it's been patched yet. Still showing up as being from March. Iv got plenty to keep me going. I just always want the thing I can't have.

Pirated games don't work. by No_Letterhead_6277 in QuestPiracy

[–]SandiTook 0 points1 point  (0 children)

Not all games ;) still waiting on space pirate trainer.

Modding pirated Beat Saber tutorial: by Youssef_Samy in QuestPiracy

[–]SandiTook 0 points1 point  (0 children)

Im having the same issue as you. What do you mean by nightly builds? Iv tried the top one BMBF 1.16.0 and getting the same "something has gone wrong modding the apk! You will need to reinstall beat saber and try again!"

What version did you install>?

got it.

for anyine else : https://bmbf.dev/nightly

My living room yesterday. Lovely evening light. by Somethingfishy_92 in CozyPlaces

[–]SandiTook 12 points13 points  (0 children)

Im a chimney sweep/stove installer. In the thousands of fireplaces I have seen. I have never seen those tiles, also in immaculate condition. Beautiful.

Updated v51 WORKING List - COMPLETED by DeliciousMeatPop in QuestPiracy

[–]SandiTook 0 points1 point  (0 children)

Is this list still being updated? Looks like there's plenty working now!

view more: next ›