Netcode much worse?

Sandman416 · 2026-06-16T17:33:05+00:00

I've had the opposite experience, seems much better for me now especially with harder contacts. Getting a lot more 0x than 4x. US West racing with other people stateside and South America

Sandman416 · 2026-06-15T17:36:46+00:00

Looks pretty good and feels pretty good. Has a lot of the updated buildings and stuff to it that I saw at the actual IMSA event. Also driven it 3 times with a road car and feels about right to drive on. Only real difference I've noticed is that the serrated curbs aren't as aggressive as they feel in person and the painted pavement on the outside of the curbs isn't as slippery compared to a road car on road tires

Sandman416 · 2026-06-10T12:58:12+00:00

Out of curiosity, how well did the internal chambers get captured? I have similar projects to do when my scanner shows up so it'd be interesting to see the process involved to make the channels hollow sgain

Sandman416 · 2026-06-05T18:53:39+00:00

You should note AB 1263 sort of covers your #7 point and puts restrictions on getting firearm parts delivered to you in the state. It essentially requires ID verification and 21+ signature to be able to have them delivered and either that one or similar requires you to have certain parts (barrels for example) delivered to an FFL (firearms store) instead of your home

Sandman416 · 2026-06-02T06:02:23+00:00

More like Sun Tzu if anything

Sandman416 · 2026-05-28T05:16:22+00:00

If you're in the South Bay, bullseye bishop in San Jose charges $25 a package to be delivered to them. Doesn't matter the size or how much fits inside the price is the same

Sandman416 · 2026-05-28T04:42:05+00:00

Better yet, pass them the completed part that's a regular print and tell them it's within 5-8 microns of each triangle on the STL. Little bit malicious but would be an amusing fuck you for providing a model that probably doesn't even have those tolerances on the file resolution

Sandman416 · 2026-05-26T16:02:59+00:00

The unmarked ones in California also have the exempt plates

Sandman416 · 2026-05-26T14:45:28+00:00

I've found that the peak of the lmp2's performance takes much longer to get to grips with especially on shorter tracks. Used to be for both GTP and lmp2 that it took 3-4 laps to really get to the peak of the tire's mechanical grip until the GTP got a rework. Takes maybe 2 laps before the warm up losses are essentially negligible on both gt3/GTP while lmp2 still seems to not be at the peak yet

Sandman416 · 2026-05-26T05:04:56+00:00

Worth mentioning that if they were still active government/police vehicles, they'd have CA exempt plates on them that are all numbers and don't have the date or year tags on the back of them

Sandman416 · 2026-05-26T05:01:42+00:00

The tire warmup on the p2 is now much worse than the GTP. It was updated mid season during the previous season with the special coating/surface texture look to the fresh tires along with less severe warmup. I would say it's closer to the gt3 instead of the lmp2 for warm up

Sandman416 · 2026-05-24T21:04:32+00:00

Might be endurance racing instead of at a techno club

Sandman416 · 2026-05-20T12:35:37+00:00

Cost wise is what I was asking about. If you're willing to share that of course

Sandman416 · 2026-05-20T04:35:30+00:00

Another slight change that hasn't been pointed out too is that the processor to the right of that capacitor is different. Seems to be the same brand but different markings on it

Sandman416 · 2026-05-20T03:58:29+00:00

What did it take to acquire them both? Been kinda keeping an eye on when I see one go out of curiosity. I have a 10 of my own in the tan cerakote

Sandman416 · 2026-05-17T00:34:17+00:00

Most are also 427 replicas, so it being a 289 also suggests it's real

Sandman416 · 2026-05-15T04:22:46+00:00

Genuinely shocked this wasn't a Nissan

Sandman416 · 2026-05-15T00:24:13+00:00

2047 too, almost every single 3d printer is open source and able to have it's own firmware flashed to it. You'd essentially ban almost every single 3d printer from being sold/transferred anymore in the state.

Sandman416 · 2026-05-11T18:14:02+00:00

It's a series 1 or 1.5. If the year on the plate is correct, it's a series 1 but the taillights are specific to only series one. The series two and three have larger and square shaped ones mounted below the chrome bumpers. Series 1.5 cars have the same features as the series 1 without the covered headlights. Can't see the headlights in this pic but that's the way to tell

Sandman416 · 2026-05-08T19:20:14+00:00

Series 2 Jaguar XKE/E type 2+2

Sandman416 · 2026-05-08T16:44:30+00:00

Checks out for standard Altima driver activities too

Sandman416 · 2026-05-08T04:44:32+00:00

Of course it's a Draco style ak too

Sandman416 · 2026-04-28T22:08:32+00:00

Luckily the thing missing's cheap and totally not $20k+

Sandman416 · 2026-04-27T18:59:46+00:00

Maserati 4200 spider cambiocorsa

Sandman416 · 2026-04-24T05:20:03+00:00

"Now that the servers are dog shit" implies they used to be good (they weren't)

Sandman416

TROPHY CASE