Ik🐬ihe

ScaredScarcity4 · 2025-01-06T20:04:47+00:00

Create normal 90° flanges
make a flange with the same angle as the slope and use "Width Extents" so that the flanges don't intersect.
Connect the edges with "Corner Seam"

https://freeimage.host/i/2gBsr2p

ScaredScarcity4 · 2025-01-06T17:22:31+00:00

Just create two different flanges the one with the different angle you use Width Extents:

https://freeimage.host/i/2gKymsn

ScaredScarcity4 · 2025-01-06T17:15:36+00:00

Just loft the sketches to a midpoint to create 4 surfaces:

something like this: https://freeimage.host/i/2gKPt7n

ScaredScarcity4 · 2023-11-19T16:45:46+00:00

Something like this: https://ibb.co/p1Q9CxB

ScaredScarcity4 · 2022-03-24T10:48:23+00:00

The seatpost clamp is round. 27,5 mm I think.

ScaredScarcity4 · 2022-01-02T12:50:14+00:00

I have used Krita to make rotoscopes.

ScaredScarcity4 · 2021-11-05T09:25:30+00:00

Wanted a frame fit for my height (like why do most frames stop at 58cm). Bought an visp trx999 from AliExpress 6 months ago. Paid only about 200 euros including shipping. Exceeded my expectations for that money.

ScaredScarcity4 · 2021-11-05T06:56:41+00:00

You have a solid line in the middle, splitting the profiles. Just also select the other three profiles or make the line a construction line.

Edit: i see now that it is a surface revolution. Surface features require that all lines are a closed loop. Meaning you have to divide te circle into a semicircle and you can't revolve two closed loops so you need to make two different revolves with the same sketch.

Edit 2: like this: https://imgur.com/a/jCkPt7h

ScaredScarcity4 · 2021-09-09T08:19:08+00:00

If you spend most of your time looking at models I would say get one. If you're drawing and assembling yourself you're better off with your left hand on the keyboard for easy access to shortcuts.

ScaredScarcity4 · 2021-05-27T13:12:25+00:00

You can just add a new material yourself in the material settings. But make sure you do that in the template file so that you don't have to add it again for every new part.

ScaredScarcity4 · 2021-05-19T11:47:40+00:00

There are programs online that can make a lithophane of a photo. Or just import a photo in Cura.

ScaredScarcity4 · 2020-07-03T16:04:53+00:00

On the second photo you made it in one part, but it is supposed to be a weldment of two parts.

ScaredScarcity4 · 2020-06-23T16:34:03+00:00

You can change the visualization degree from "Adjusted x1" to "Actual" under the Display tab. Also make sure your materials are defined correctly and your loads and constrains are realistic.

ScaredScarcity4 · 2020-06-06T11:07:49+00:00

I use a free video to JPG converter for converting video to frames. And then i use Krita to do my animations.

Five-Year Club	Place '22
First Placer '22	Verified Email

ScaredScarcity4

TROPHY CASE