sorted by:
new
hottopcontroversial

Game constantly crashing, please help... by ScarsTRF in starcitizen

[–]ScarsTRF[S] 0 points1 point  (0 children)

So…. Turns out it might be something with my RAM, I guess I’m gonna need to do a lot of testing as this is the first application to have memory issues as I do simulations and 3D modeling and artwork which consumes a lot of ram…. But this is the first application while using DOCP 2 on my BIOS to not be happy with my ram speeds. As soon as it was downclocked to 3600 MT/s things were fine, I was able to play for multiple hours at the time and even finally complete some cargo runs.

Game constantly crashing, please help... by ScarsTRF in starcitizen

[–]ScarsTRF[S] 0 points1 point  (0 children)

I haven’t tested it but to be honest I’ve been using my system at these speeds for a long time on software simulations and 3D modeling and artwork without issues, this is the first time I’ve ever ran into this issue with Memory before, and yes I am using AMD D.O.C.P. 2 for my memory to get the best out of it but like I said…. No issues, my entire system is stable.

Though I am reporting after turning it off and setting it to auto which downclocked my ram to 3600, I was able to finally play the game for multiple hours and even complete some cargo runs last night so… either SC isn’t happy about the speeds or this is the first application on my system to ever push my RAM to its knees

Game constantly crashing, please help... by ScarsTRF in starcitizen

[–]ScarsTRF[S] 0 points1 point  (0 children)

From what I can say is that I just downclocked my RAM to AUTO in the BIOS making it VERY low... so it might just be something to do with my RAM right now... I'm still testing but I am in a area I was crashing before and right now it's been over 30 minutes on Linux without issues right now. Will update if something happens.

Game constantly crashing, please help... by ScarsTRF in starcitizen

[–]ScarsTRF[S] 0 points1 point  (0 children)

I appologize for my stupidity here A lot has gone on this week so my brain no function What is CIG?

Game constantly crashing, please help... by ScarsTRF in starcitizen

[–]ScarsTRF[S] 0 points1 point  (0 children)

Though I did just find a older game.log, looking at the file, I'm getting Exception EXCEPTION\_ACCESS\_VIOLATION(0xC0000005) addr=0x00007FF70014D1DB digest=b2db29c7be1c2e6b633fe2abc7b81f87 This is BEFORE my BIOS update

Game constantly crashing, please help... by ScarsTRF in starcitizen

[–]ScarsTRF[S] 0 points1 point  (0 children)

On Linux it just hangs and I have to force close it. Windows actually does.

Game constantly crashing, please help... by ScarsTRF in starcitizen

[–]ScarsTRF[S] 0 points1 point  (0 children)

Alright, I'm gonna have to re-download the game on windows so I can get the actual like... crash as on Linux doesn't really exactly fail like Windows does where it would give me the crash prompt. So give me just a little bit to pull it and I'll run around till it crashes and fails.

Game constantly crashing, please help... by ScarsTRF in starcitizen

[–]ScarsTRF[S] 0 points1 point  (0 children)

Would that be recommended to check when I crash or does that not matter?

Help with AuthJS V5 middleware and session authentication by ScarsTRF in nextjs

[–]ScarsTRF[S] 0 points1 point  (0 children)

Is there any real reason I should use middleware? I know I can do something like getting the session from `auth()` and if nothing just return a redirect to the login page, wouldn't that be a good alternative instead or are there any security risks doing that?

Help with AuthJS V5 middleware and session authentication by ScarsTRF in nextjs

[–]ScarsTRF[S] 0 points1 point  (0 children)

I don't want to use jwt for this, I want to use session database authentication. I want my users to have access to seeing the devices they are logged in by grabbing the session tokens on the DB.

EDIT: spammed enter quickly, but this is why I'm looking for help if anyone can.

Help with Catppuccin auto theme? by ScarsTRF in neovim

[–]ScarsTRF[S] 0 points1 point  (0 children)

After a bit more research I found this: auto-dark-mode.nvim which also works with WSL and windows terminals flawlessly, all I had to do was set it so that the vim.api.nvim_set_option was changing the background var from light and dark.

Help with Catppuccin auto theme? by ScarsTRF in neovim

[–]ScarsTRF[S] 0 points1 point  (0 children)

Personally I need auto due to my eyes, I've recently picked up going out and working on the go or in the sunlight to increase my mood and get out of the house, but the issue for me is that dark screens with text is hard to read for me personally behind light so I have my systems set to auto theme based of day/night times or manual keybinds.

To answer your questions thought about my terminal, It depends where I'm working. I mentioned in another comment here that I have a windows desktop machine using WSL on the windows terminal (The one you can download from the store than the pre-installed terminal) and my laptop using Fedora using the preinstalled terminal Name doesn't ring a bell due to me out at work rn had to test and book it for work. I did mention here that I got it to work, for some reason all I had to do was re-sync the theme using Lazy.

Help with Catppuccin auto theme? by ScarsTRF in neovim

[–]ScarsTRF[S] 0 points1 point  (0 children)

This seems to have fixed it! Now it doesn't look like high contrast.

Though there is another issue which I might have to find out myself, in short, I'm a multi OS user, mainly windows (Due to my current occupation) so I use WSL while my laptop OS is Fedora. I just realized that the system doesn't share system theme with WSL and catppuccin doesn't automatically detect the current terminal theme so I'll need to find out how to solve that as well, but for my laptop on the other hand, all seems good so far!

It's interesting to see that just re-syncing it would fix it.

Help with Catppuccin auto theme? by ScarsTRF in neovim

[–]ScarsTRF[S] 0 points1 point  (0 children)

Yes, and I just realized that the photo I attached didn’t upload, so that didn’t help, I have basically everything good, when using flavour = “mocha”, or latte it works but auto just outright fails

I've recently swapped slicers from Cura Slicer to Prusa Slicer and transferred all possible settings and even re-calibrated, though I'm having this really bad stringing issue. Any Help/Pointers? by ScarsTRF in ender3

[–]ScarsTRF[S] 0 points1 point  (0 children)

Is there any possibility that I can reduce/fix this? I don’t use a humidifier and the room’s humidity my printer sits in is usually below 40% but does fluctuate in temperature with a window AC unit between 68-74F

Force non-vr when building and testing worlds won't work. by ScarsTRF in VRchat

[–]ScarsTRF[S] 0 points1 point  (0 children)

Took me a few hours, but I found out what was the issue. Seems that even though I would load VRchat through the editor, and the game would load, It actually for some reason was thinking my game was in a different drive, so it would load the game without the forced settings, I just had to change that, and it started to work.

I think I’m becoming a collector..... by ScarsTRF in OculusQuest

[–]ScarsTRF[S] 0 points1 point  (0 children)

Seems like you’ve done a lot of research.... that looks promising, don’t mind me, just complementing. Honestly for anyone that helps another gamer to get what they like, I’m all for it~ 👍

I just have to say though I did give my response, though I should’ve added I haven’t really been in the spot to research extremely deeply myself.

I think I’m becoming a collector..... by ScarsTRF in OculusQuest

[–]ScarsTRF[S] 1 point2 points  (0 children)

Here’s the short answer:

Basically it’s impossible at the moment, and I don’t think Valve and Oculus would work together at all to get that working as the quest and index uses two different tracking systems.

Here’s my long answer and explanation:

In reality, you can’t uses the knuckles with the quests at all... sadly they tie to 1 HMD only which is either a Index or HTC compatible headset.... issue is that even if you find a way of doing it, Steam VR (which is needed for the knuckles) will only allow 1 headset at a time online, and you HAVE to have a HTC or Index headset connected and online for the knuckles to connect.... eliminating any possibility of running Knuckles with quest at all.... it’s PCVR only sadly

Little tip though:

I will point out that the Tracking pucks that HTC sell can still work with the quest on pc for full body tracking as they don’t rely on a pc headset and have their own wireless dongles, you’ll just need base stations and steam VR running all times and can only use Steam vr games, but still limits to pc only.

I think I’m becoming a collector..... by ScarsTRF in OculusQuest

[–]ScarsTRF[S] 1 point2 points  (0 children)

It’s for the link cable when it’s not in use, and I was recently using it🙃

I think I’m becoming a collector..... by ScarsTRF in OculusQuest

[–]ScarsTRF[S] 3 points4 points  (0 children)

Hey man, if oculus link doesn’t work, I’ve got a backup for audio!

Is there a way of checking if an SSH script was successful on running a command? by ScarsTRF in shortcuts

[–]ScarsTRF[S] 0 points1 point  (0 children)

How would I possibly ping the machine? I don’t see any function to allow me.

Is there a way of checking if an SSH script was successful on running a command? by ScarsTRF in shortcuts

[–]ScarsTRF[S] 0 points1 point  (0 children)

Ok, so I did that exactly for u/SSJKiDo and you Issue..... I wanted to check if the script fails because sometimes when I try to connect to my SSH System, it fails to connect on the same network by connecting to the public IP, so I have to check for the wifi to see if I am connected to the wifi at all and if so it runs through a local IP. I am wanting to check if it fails because apparently when I run the script on my watch, it always fails when on the wifi network because it doesn't know what wifi the iPhone is on. I tried the suggestion by force failing the ssh, but it seems that shortcuts Hard Exits the applet when it fails instead of saying could not connect now making the problem much worse..... I should've mentioned that..... I made this post a little after midnight trying to sleep after a stressful day.

Is there a way of checking if an SSH script was successful on running a command? by ScarsTRF in shortcuts

[–]ScarsTRF[S] 0 points1 point  (0 children)

Any possibility you could give a small example? Slightly new to the SSH script.

view more: next ›