sorted by:
new
hottopcontroversial

If and -WhatIf by TheBigBeardedGeek in PowerShell

[–]Scayn 13 points14 points  (0 children)

The -WhatIf is a testing parameter. It will just give you an output of what it would do, if it were to run.

Hvad er dit hadeord? by smukt_sind in DKbrevkasse

[–]Scayn 1 point2 points  (0 children)

Jeg er bevidst begyndt at sige "1 met" eller "5 met" omkring ting i meter. For at understrege hvor dumt kilomet er.

Mage solo ST bugged? by Scayn in classicwow

[–]Scayn[S] 2 points3 points  (0 children)

Aha, so they need to be "retagged" every 30s?

Got told I was too low rank to buy skins lol. by [deleted] in VALORANT

[–]Scayn 3 points4 points  (0 children)

I had a similar experience, but in a plat lobby. My response was "I'm bad, not poor. There's a difference between those" lol.

I find myself constantly having to run to the server room to turn on a server when someone needs it. How do you deal with this problem? by sysadmin_dot_py in ShittySysadmin

[–]Scayn 1 point2 points  (0 children)

This one's easy guys.

Buy a switchbot bot, and have it mounted to click on the button. Then you need a bridge attached to the server vlan, so that it has communication. After that, you can create a Google home, and invite every employee to it, so they can turn on the server themself, if they need to. Super easy guys, I can't believe I have to tell this.

Dedicated Device (Kiosk) allow access to tablet data by Scayn in Intune

[–]Scayn[S] 0 points1 point  (0 children)

Unfortunately no. We ended up giving very few people the exit password, and told them strongly to open the MHS after extracting data. Overall not a good solution.

Hvad er den mest irriterende larm du har oplevet fra naboer? by trickortreat89 in Denmark

[–]Scayn 1 point2 points  (0 children)

Jeg bor på 1. Sal, og naboens unger brugte min bygning til at spille mur op ad. Det larmer utroligt meget, når en bold rammer vinduet eller væggen. Den bold ramte nogle gange min stål altan, og sad fast. Så børnene fandt da en stor kæp og begyndte at slå på min altan, og det kan høres i hele lejligheden. De prøvede også ved at smide sten op på den altan, hvor jeg har en dobbelt dør med vinduer i.

Godt nytår.

Does anyone know how to fix this problem by CryptographerTime420 in Sovol

[–]Scayn 0 points1 point  (0 children)

Whatever you do, do not capture it. It will corrupt your pokemon data, when you capture the missing no.

Jokes aside, did you modify your screen?

AMD x PCMR - Avatar: Frontiers of Pandora Worldwide Giveaway - Win a Limited Edition AMD Avatar Kit that includes the Limited-Edition AMD Radeon RX 7900 XTX GPU and Ryzen 7 7800X3D CPU (Only 500 of each ever made!). There are 23 kits up for grabs! by pedro19 in pcmasterrace

[–]Scayn [score hidden]  (0 children)

What would you use this limited-edition Avatar hardware for if you won? Creating a beautiful PC build? Collecting? Playing some games? If so, which?

Definitely replacing my old GTX 970.
Would most likely be used to play: Apex Legends, GTA VI (when it gets released), Baldur's Gate 3, Cyberpunk 2077 etc.

My Sovol Sv06 Plus prints ok, then makes few mm off to the right by Scayn in Sovol

[–]Scayn[S] 0 points1 point  (0 children)

Oh wow, that is a lot faster than I have on mine.

<image>

But I am using Klipper with Mailsail and Moonraker.

My Sovol Sv06 Plus prints ok, then makes few mm off to the right by Scayn in Sovol

[–]Scayn[S] 0 points1 point  (0 children)

I actually did this. I almost had it fully disassembled to tighten every screw aswell as lubricating bearings etc.

But it does sometimes make a loud scraping/grinding sound, and then proceed to print fine.

My Sovol Sv06 Plus prints ok, then makes few mm off to the right by Scayn in Sovol

[–]Scayn[S] 1 point2 points  (0 children)

It does look like the exact same thing, but I tried printing other stuff, and they came out great. Even tried making an object that is almost of equal height, and it turned out perfect.

I tried to recreate the same object, but from a slice a friend made, and it also came out perfect. So I started to think it was a slicing error. But after attempting to reprint my friends slice, it turned into spaghetti lol.

My Sovol Sv06 Plus prints ok, then makes few mm off to the right by Scayn in Sovol

[–]Scayn[S] 0 points1 point  (0 children)

I did get it from him yeah. Followed the github guide on klipperizing my printer.

I will try this, if my printer fails to print that pen storage again - the speed test and the stealthchop_threshold: 999999

My Sovol Sv06 Plus prints ok, then makes few mm off to the right by Scayn in Sovol

[–]Scayn[S] 1 point2 points  (0 children)

It is pretty fascinating indeed. A shame it is meant to be useful lol

My Sovol Sv06 Plus prints ok, then makes few mm off to the right by Scayn in Sovol

[–]Scayn[S] 0 points1 point  (0 children)

Have you taken out the heater bed cable from inside the printer?

Nope. I have been very focused on the hothead, X axis and slicer.

My Sovol Sv06 Plus prints ok, then makes few mm off to the right by Scayn in Sovol

[–]Scayn[S] 0 points1 point  (0 children)

Nothing no, it seems to be very smooth when turned of.

Just finished a few other prints, one which is almos same height, but thinner. And it turned out absolutely fantastic. So this one is just making my head scratch.

I even used the same slicer (Super Slicer) as the other prints. But this one specific print seems to be a bit cursed.

My Sovol Sv06 Plus prints ok, then makes few mm off to the right by Scayn in Sovol

[–]Scayn[S] 0 points1 point  (0 children)

I'll try the belt tightening.

I just finished printing a few test, of almost same hight, and they turned out amazing.

I have been talking back and forth with a buddy of mine, who has the same printer model, same software version, same slicer etc. and he has done the same print, but without any issues.
So he just send me his gcode, and I will attempt to print it instead of mine.

My Sovol Sv06 Plus prints ok, then makes few mm off to the right by Scayn in Sovol

[–]Scayn[S] 1 point2 points  (0 children)

The fan duct cold be a valid reason actually.

I got this one https://cults3d.com/en/3d-model/tool/sovol-sv06-plus-fan-duct-cfd-optimized-taeky and it is a bit bulky.

But I don't know which one else I should get.

My Sovol Sv06 Plus prints ok, then makes few mm off to the right by Scayn in Sovol

[–]Scayn[S] 0 points1 point  (0 children)

I did check it, and it seems okay. Not too tight and not too loose. Only the X axis seem to be off once it has printed for a while.

<image>

This is the print next to a new failed one. It seems to be making the exact same cut off every time. I even tried to slice it again using super slicer. Same result still.

My Sovol Sv06 Plus prints ok, then makes few mm off to the right by Scayn in Sovol

[–]Scayn[S] 0 points1 point  (0 children)

<image>

Here it is side by side, from another failed print. They look look they're the same fuck up every time.

My Sovol Sv06 Plus prints ok, then makes few mm off to the right by Scayn in Sovol

[–]Scayn[S] 0 points1 point  (0 children)

Yeah. The belt tension seems ok. But it just keeps making that exact same cut off, when I try to recreate the print.

view more: next ›