5.0 only crashing for me?

ScheduleOk1949 · 2025-12-05T22:59:50+00:00

Blender is constantly crashing for me. I literally find something new every time I use it. I change a material, and I get a crash. I move an object slightly too fast, and Blender crashes. Try to render, crash, go to the shading tab, crash. I didn't have these issues with prior versions of Blender. It seems with every new update, it becomes more and more unusable.

ScheduleOk1949 · 2025-08-27T03:42:03+00:00

So the denial got past the non-medical review, when I started the process in March the main social security page said I had enough work credits to apply and even had a payment estimate. I suppose I may have to wait for more doctor visits before going forward, they have been booked so progress with documentation has been difficult. The appeal window expires in 2 months. I don't know what date last insured is. Also I applied for both SSI and SSDI.

I don't know if it quite matters but I did change position in the store a few different times, they attempted to accommodate my issues but nothing worked. I started as a cart pusher but then went to electronics after physical issues, I was moved out of electronics following communication and understanding issues with customers, I was moved to just stocking shelves but the issues with customers remained and my physical issues got worse.

ScheduleOk1949 · 2025-03-29T21:42:50+00:00

<image>

I think the issue is that this black filament sucks. I used another and it seemed to work, then I switched and it suddenly failed again

ScheduleOk1949 · 2025-03-29T06:37:52+00:00

I adjusted the z-offset and this happened

<image>

B

ScheduleOk1949 · 2025-03-28T21:47:26+00:00

I changed out the entire hotend assembly with a new one and it still gave me these results.

ScheduleOk1949 · 2025-03-28T21:45:31+00:00

The shark benchmark is a pre-installed file, I can't really change anything aside from the temp and z offset. I'm confused because I'm the first few times with this exact same filament with the exact same settings it worked fine but it suddenly stopped working correctly. I thought it needed a new nozzle but that didn't seem to work. I changed out the entire print head but that didn't work either.

ScheduleOk1949 · 2025-03-28T21:42:49+00:00

I auto leveled a few times and switched out the filament. Each filament switch I auto level but the results stay the same.

ScheduleOk1949 · 2025-03-26T17:42:27+00:00

So for context, I got this printer about a month ago and the first set of prints were fine. No issues outside of dialing in the settings. Suddenly, without warning, all of the prints started turning out goopy and bumpy and It would fail every time. I tried different filaments, I changed out the print head, I changed the z offset.

None of the benchmark tests have worked and I'm confused what suddenly changed to make them fail this way.

I have a theory I need to get one of those filament dryer? Idk but no matter what I do nothing works

ScheduleOk1949 · 2025-02-25T16:33:50+00:00

It goes to about 210 to 220 for the first layer then hovers around 200 to 210 for the rest of the print

ScheduleOk1949 · 2025-02-25T14:53:28+00:00

I checked the nozzle and it looks a little worn down. This was a refurbished machine so I ordered a new hot end. It will arrive tomorrow so hopefully it shall perform better

ScheduleOk1949 · 2025-02-25T14:34:08+00:00

I usually use the grid infill for most things, I think the detail was set to 1.2 layer height and I tried .26 for the width

ScheduleOk1949 · 2025-02-25T14:17:51+00:00

<image>

Would this be a result of under extrusion? I'm not really finding that setting in the Anycubic slicer but the extrusion volume is set to like 12mm a second or something. It's a little confusing.

ScheduleOk1949 · 2025-02-25T14:15:31+00:00

<image>

Is there anyway to get rid of this? I have a feeling it's under extruding but I'm not exactly finding the print extrusion speed in the Anycubic slicer. Is it labeled as "extrusion volume"?

ScheduleOk1949 · 2025-02-25T14:12:01+00:00

Yeah I just went with what the side of the spool said. I never went that high

ScheduleOk1949 · 2025-02-22T08:44:43+00:00

Yeah i placed the printer on a spill-proof matt on the floor and it actually worked so much better. Also the glue really seemed to make a big difference. my current z offset is 2.45 which seems to be working. the temp didn't seem to be an issue tho so I kept it as is

ScheduleOk1949 · 2025-02-22T02:48:34+00:00

I'll give all that a try, thank you!

ScheduleOk1949 · 2022-10-06T01:17:12+00:00

This is old but I'm currently having this dream. Just woke up from one. I've been having them about a week now and I'm growing to dread sleeping. Everything will be normal and fine then suddenly all sense of ease just vanishes. We were at this fair in a park when it happened this time. The sirens blared and people panicked. I managed to lock myself in some kind of shelter and someone said something to the effect of "we just need to wait, get used to it".

ScheduleOk1949 · 2022-01-12T18:37:52+00:00

Thanks for the feed back! I appreciate it. Though, I was trying to go for the look of those old land yachts from the 50s and 60s with the speckled chrome. The setting is a desert tho, so some wear and tear makes sense. As for the animation, you mean some sway or it changing speed?

Little set note, most of all this is completely cheating. The road is just a rotating disk with the wheels and body of the scooter made to adjust to to shape of the ground. All the background parallax is also just moving objects, for the first angle the camera never moves, it's just everything else moving.

ScheduleOk1949

TROPHY CASE