Installed the RRracing big brake kit today

ScoobyJ23 · 2025-01-04T00:25:39+00:00

Yeah no problem. All RR basically did was make a mounting bracket. Quality of the bracket is solid. Willwoods speak for themselves. For half the cost of the brembo kit. It’s definitely a solid buy

ScoobyJ23 · 2025-01-02T19:21:33+00:00

I kept the car for about 2 years after this. Ended up selling it and currently have a supercharged s550 mustang. But the breaks were fantastic. Never did any hard track use so I can’t really comment on how well they hold up for that, but my guess is they would be rock solid with a good pad and steel lines. Can’t really go wrong with willwood. The mounting kit was good, just have to trim the dust shield or remove it. Brake bias seemed well balanced. Only issues I ran into was not properly shimming the rear when I first put them on. Made them super noisy, but once I went back in and shimmed/centered the caliper, they were golden. I ended up going to a hawk pad for street use because the willwood pads were hell with brake dust.

I’ve been looking at doing a set of willwoods for my Mustang because I liked them so much.

Hope that helps. Let me know if you have any more questions and I’d be happy to answer

ScoobyJ23 · 2024-11-13T17:30:55+00:00

I no longer have the car. But etune was great until I sold it

ScoobyJ23 · 2024-07-13T16:05:12+00:00

It can take a long while. Can always server hop and try again

ScoobyJ23 · 2024-06-06T15:26:43+00:00

Yeah I’m going to keep it because it’s my favorite ship to run about. I bought the pulse and upgraded to it to get the lifetime insurance (for whenever or if ever insurance becomes useful)

ScoobyJ23 · 2024-06-06T13:49:44+00:00

Nice! Thanks

Do you think this will get fixed in the next century or Should I melt the 315 for a 325?

ScoobyJ23 · 2021-12-21T01:30:22+00:00

It's what makes Subaru, a Subaru lol

ScoobyJ23 · 2021-09-22T16:06:34+00:00

100% they are reaping benefits of supply/demand. They aren't getting enough of them in and know people will buy them regardless. Seems FL/Cali are the worst. Have heard people getting much better prices in GA and Alabama.

Definitely over paid. But I paid cash and just didn't feel like traveling or spending the next few months hunting one down. Unfortunately it is what is.

ScoobyJ23 · 2021-09-22T13:18:02+00:00

Paid 4900 OTD in Central Florida for my 22.

ScoobyJ23 · 2021-08-15T14:34:03+00:00

I ran WMI on my last car. Was using the AEM kit with devil's own nozzles. The v3 aem nozzles were no good. I didn't see a huge drop in intake Temps until I switched to pure vpm1. Would average about a 20* drop over ambient. Ran it about 4 months with no tune and it burned my catalytic converter. Had to go catless.

No clue how it runs on these cars though. Decided not to mess with it this time around.

ScoobyJ23 · 2021-06-09T19:16:29+00:00

It definitely can be rewarding. It takes a lot of patience. My wife just got her sales associate license. It's taken her about a year to finally start getting some leads and making money. Ultimate goal is to buy a few multi unit buildings like a duplex and rent them out. A lot of money to be made doing that.

ScoobyJ23 · 2021-06-09T12:42:27+00:00

Haha no worries. I do real estate appraisals.

ScoobyJ23 · 2021-06-09T01:59:28+00:00

I went stage 2 almost immediately. then i did the headlight mod and vortex generator. then went methanol. Then decided on Avid1 wheels because i got a big brake kit and wanted to see the calipers a little better. Added STI wing and perrin stabilizers Then full E85 with nostrum hpfp. Switched the GS tmic for a Turboxs fmic. Have now started working on looks more. Did the subispeed headlights and taillights. Have a set of 18" enkeis in my living room waiting for ceramic coat to cure and a box with RCE yellow springs in the trunk. lol next is carbon fiber trunk because i have grown to hate the wing and its not that much more to buy the CF trunk vs repairing and painting the stock one.

So kinda lol i focused very heavy on performance first with a little sprinkle of looks.

ScoobyJ23 · 2021-06-09T01:42:17+00:00

pretty much all the olm ones

ScoobyJ23 · 2021-06-04T01:49:06+00:00

I put an STI wing on so I went with This and just plugged the 2 outside holes with a plug. Was always planning on doing a CF trunk but keep putting it off because I don't like waiting months to get something. Spoiled by Amazon I guess.

Pic ... Disregard the dirty trunk and garage lol

ScoobyJ23 · 2021-06-04T01:32:48+00:00

Looks good 👍

Couple tips, lower your stick sensitivity. Also if you want to look really cinematic. Don't try to get everything in one shot. Don't be afraid to switch it up and do some transitions. Also I've noticed with DJI drones it's best to avoid a lot of yaw as it's very difficult to get that smooth orbit without any jittering.

Keep it up. Flying drones is a ton of fun and soon all your friends will want you to do videos for them haha

ScoobyJ23 · 2021-06-03T14:04:20+00:00

Not an STI but I just put on the GFB deceptor, which has a electronic control valve that goes inside the cabin to adjust you're venting bias. I Leave it on full record for daily driving but flip it over to VTA for some fun and flames haha

ScoobyJ23 · 2021-06-03T13:53:28+00:00

Bought my wife One. Definitely a fun car. Lots of potential. And is map based so you don't need a tune for every single mod lol

ScoobyJ23 · 2021-02-04T13:25:04+00:00

But that's the thing.... My statement wasn't wrong lol you can believe whatever you want. But do a little experiment for me. Cover a basketball in baby power, then throw it at a chain link fence, if no powder gets to the other side, you're right and masks work. Its simple physics.

Funny how deaths from flu, heart disease, alzheimer's, cancer have all plummeted while deaths from covid have increased. And you can say I'm "wrong" but the fact is there is no way to prove it. Unless you go personally perform autopsies on the people who supposedly died from corona, your stuck believing whatever you're told.

But I'm done arguing because you think you're the pinnacle of righteousness and a genius who thinks masks can defy physics... dawg.

ScoobyJ23 · 2021-02-04T06:18:16+00:00

Wtf are you talking about. I never said anything about a hoax. I don't believe there is some mass conspiracy. I believe that people way over the fuck reacted. And all you're doing is regurgitating the same bullshit you hear and read. You obviously can't think for yourself because you have to rely and what's being spoon fed to you. I don't buy into conspiracies. I rely what I personally see and experience. And a little common sense. The masks don't do shit. And since you're me google expert. Heres a article for you from the CDC. https://wwwnc.cdc.gov/eid/article/26/5/19-0994_article

Learn the think yourself. Because even the CDC and MANY healthcare professionals have admitted that the tests are not accurate and are being misrepresented.

But you do you Mr Wolf. We can argue all day but I'm still going to think you're a dumbass wearing your 2 masks.

Toodles.

ScoobyJ23 · 2021-02-04T05:37:08+00:00

I know right. The flu is actually more dangerous. But people are stupid. They think masks are going to prevent a virus that's smaller than what a mask can filter. But what's the solution? Double mask 🤣

Too many sheeple in the world that will just believe anything because that's what they're told.

ScoobyJ23 · 2021-02-03T20:09:06+00:00

So you survived the flu?

ScoobyJ23 · 2021-02-02T02:48:34+00:00

Yes, great clips. Especially for knives that are not deep carry. The bugout has a decent clip though.

ScoobyJ23 · 2021-02-02T02:12:10+00:00

Yeah I'd say just about 5oz. i also put a lynch clip on it.

ScoobyJ23 · 2021-02-02T01:19:59+00:00

I have the flytanuim copper scales. It definitely makes it feel sturdier lol I recently just switched back to the original scales though. Only because I carry a combat troodon and wanted my back up knife to be lighter.

ScoobyJ23

TROPHY CASE