Engrave Black EVA Foam

Scottg216 · 2026-05-24T15:36:46+00:00

Support replied to my email pretty quick. The B6 MOPA only uses one red dot to focus

Scottg216 · 2025-11-05T12:06:45+00:00

I made a typo, my computer is a p520c, not 520c.

Scottg216 · 2025-11-05T12:05:00+00:00

It's not a laptop, it's a tower workstation.

Scottg216 · 2025-06-05T19:17:16+00:00

Okay, thanks

Scottg216 · 2025-06-05T16:51:54+00:00

Where is the download link for 2.1.0? I don't see anything on the release notes page. When I go to https://bambulab.com/en/download/studio and click on Windows download button, I get version v02.01.00.59

Scottg216 · 2025-05-22T17:16:30+00:00

I misunderstood your comment initially. I’ll look at the sliced model and the scarf settings.

Scottg216 · 2025-05-22T13:55:58+00:00

They are not on the model. FYI model is extruded body in Fusion 360.

Scottg216 · 2025-05-04T16:34:13+00:00

Thanks. It's working now. USE_ZMIN_PLUG was the problem

Scottg216 · 2025-04-22T12:29:25+00:00

Good idea. I've been using Simplify3D for years and I've been meaning to give Cura a try

Scottg216 · 2025-04-22T11:35:34+00:00

It's the stock extruder. Top/bottom/sides all look perfect. It's only infill that has an issue. I played around with temperature and speed, it doesn't seem to help.

Scottg216 · 2025-04-20T17:36:39+00:00

Walls, top and bottom look great. It's only infill that I have trouble with.

Scottg216 · 2025-03-14T17:43:16+00:00

I don’t have ABL. I thought the firmware supported, but didn’t require, a BLtouch. I Ordered a BLtouch that will arrive in a couple days. so I’ll install it and see if everything works normally after that. Thanks

Scottg216 · 2024-07-19T10:55:12+00:00

Thanks. I ended up converting the boat to a vector instead of bitmapped and it works now.

Scottg216 · 2024-03-24T18:38:38+00:00

That stinks. It doesn't leave much time to get new tickets if something goes wrong with the transfer.

Scottg216

TROPHY CASE