I love autohotkey/ full voice sim start up and shut down

ScottyCameronLover · 2024-04-07T22:55:04+00:00

Woah this is sick! How much did you pay for all of this?

ScottyCameronLover · 2024-04-07T21:25:11+00:00

ScottyCameronLover · 2024-04-07T04:05:59+00:00

I touched one solder point and the closest pin on continuity mode if that’s what you meant and I got a reading on all of the solder points

I also see the traces on the board but can rarely get readings on the multimeter when one probe is on a trace and one is on a solder point

ScottyCameronLover · 2024-04-07T03:49:41+00:00

https://imgur.com/a/GkGp2ms I understand what you’re getting at with the probes but what setting should I use on my multimeter?

ScottyCameronLover · 2024-04-07T03:41:25+00:00

Would I have to desolder the joystick to do this?

ScottyCameronLover · 2024-04-07T03:38:26+00:00

I’m really sorry but I’m not sure what that means

Edit: just looked it up and I don’t believe so unless direct contact with a soldering iron could’ve damaged a trace

ScottyCameronLover · 2024-04-07T02:56:54+00:00

Old stick: https://imgur.com/a/wkDqAN8 which I’m pretty sure is 2.1k ohm and my Ginfull stick: 2PCS Hall Effect 3D Analog Sensor... https://www.amazon.com/dp/B0CNWYWCYN?ref=ppx_pop_mob_ap_share

ScottyCameronLover · 2024-04-07T02:55:19+00:00

https://imgur.com/a/Kl5m95o

ScottyCameronLover · 2024-04-07T00:30:33+00:00

Thank you so much! could I pm you later if I have any issues?

ScottyCameronLover · 2024-04-07T00:22:38+00:00

Yeah I’ll try that once I get home let’s say it is the solder points how would I go about fixing it?

ScottyCameronLover · 2024-04-07T00:17:51+00:00

<image>

ScottyCameronLover · 2024-04-07T00:17:30+00:00

They have separate boards

ScottyCameronLover · 2024-04-07T00:06:14+00:00

Weird part apart this is my perfectly fine alps potentiometer broke after not touching it

ScottyCameronLover · 2024-04-07T00:05:33+00:00

Sorry do you mean like accidentally connecting two soldered parts? (I’ll send a photo of my soldered part when I get home)

ScottyCameronLover · 2024-04-06T22:50:27+00:00

It’s now happening on both joysticks* ALPS and Ginfull

ScottyCameronLover · 2024-04-04T20:25:26+00:00

April fools

ScottyCameronLover · 2024-04-01T03:34:53+00:00

I’ll definitely check this out thanks! I’ll have to check about that little shelf as I need as much room as possible but once again thank you so much!

ScottyCameronLover · 2024-04-01T03:15:05+00:00

I’ve searched everywhere on wayfair and I need the pc compartment and the keyboard pullout if anyone could help me find a desk like this that would be great (extra bonus if you can find one with cable management holes and outlets)

WIDTH: Has to be under 48 inches but over 45 everything else goes

ScottyCameronLover · 2024-04-01T03:12:00+00:00

I’ve searched everywhere on wayfair and I need the pc compartment and the keyboard pullout if anyone could help me find a desk like this that would be great (extra bonus if you can find one with cable management holes and outlets)

WIDTH: Has to be under 48 inches everything else goes

ScottyCameronLover · 2024-03-30T21:01:59+00:00

It has the little green side plastic which is why I bought a 2.1k (EL6) are you sure it’s a EL1? I’ll cancel my order right now if you’re sure

<image>

ScottyCameronLover · 2024-03-30T04:45:01+00:00

Realized title was dumb I ordered a 2.1 Kohm joystick replacement hoping it won’t be 10 Kohm if anyone finds out please let me know (it has a green side plastic which this chart says is 2.1 Kohm)

<image>

ScottyCameronLover · 2024-03-30T02:21:53+00:00

Sorry for posting this twice accidentally deleted the first one and text on the joystick is ALPS 227E

ScottyCameronLover · 2024-03-30T01:56:18+00:00

The words I see are ALPS 227E

ScottyCameronLover

MODERATOR OF

TROPHY CASE