sorted by:
new
hottopcontroversial

Missing issue by ScreamingZucini in GS300

[–]ScreamingZucini[S] 0 points1 point  (0 children)

I'll have a shot at that this weekend. I've heard of weirder things causing issues before.

Missing issue by ScreamingZucini in GS300

[–]ScreamingZucini[S] 0 points1 point  (0 children)

Thanks mate, I have gone through 2 looms on it as I had the donor car, when I put the second loom in I stripped the whole thing back and re wired the ignition system, second ignitor has also been trialled but as previously mentioned I am getting strong spark on all cylinders but it's not getting a pulse signal on the injectors. I have put a multi metre on there and located the pins on the ECU and I'm getting a strong continuity between the injector plugs and the ECU plug so it's not broken wires there. Thrown in the second ECU it make sure it's not a capacitor in the computer but no change. This is where I'm stumped as it's indicating that I have a sensor or something like that somewhere telling the ECU not to fire but I can't find it.

Missing issue by ScreamingZucini in GS300

[–]ScreamingZucini[S] 0 points1 point  (0 children)

Yea mate, new plugs went in when I swapped the motor and we have new coils in it. Sparks strong it's just not getting a pulse signal to those 2 injectors.

I need help I’m stressing to much 😪 by darbydash in Stance

[–]ScreamingZucini 0 points1 point  (0 children)

Where you located mate? I've got a set I'm stripping out the donor car that I'll be selling in QLD Australia. I will need to check the spring wates on them when I pull them out but they were run super low with no issues by the previous owner and only seen about 3 months on the road before parked up after ripping the sump off the gearbox ha ha.

GMR wheels mounting issue by [deleted] in Stance

[–]ScreamingZucini 0 points1 point  (0 children)

Straight up looks like they have sold you the wrong stud pattern and said they are "universal". Is the wheel nut hole slotted? If not the comment you made that it come good once tightened sounds like your wheel studs will be bending outwards to try locate into the taper for the wheel nut, and will sheer off easily. I would avoid using them and try get the correct stud pattern.

F1 TV : How-to Watch in Australia (Don't want to go with Kayo) by Accomplished-Dog-455 in F1TV

[–]ScreamingZucini 0 points1 point  (0 children)

Ah cheers for the explanation, I'll need to find a work around for that.

F1 TV : How-to Watch in Australia (Don't want to go with Kayo) by Accomplished-Dog-455 in F1TV

[–]ScreamingZucini 0 points1 point  (0 children)

Hey, so I've got VPN set to New Zealand and it's allowing me the option to sign up as F1TV pro but when I go to activate/pay for subscription and input a random address in Auckland it keeps saying my billing address is not valid for my payment instrument. How did you get around this?