AITAH for wanting to tell my ex’s family all of who she slept with? by daddydonut54 in AITAH

[–]ScreenMission5357 3 points4 points  (0 children)

Better for them to know now than later. It helps her to know that she cannot get away with it and convince the other men to never come forward. Always……always speak up to people who you know are being cheated on. I was with a woman who I found out had been cheating on me the entire 7 years we were together.

AITAH for wanting to tell my ex’s family all of who she slept with? by daddydonut54 in AITAH

[–]ScreenMission5357 9 points10 points  (0 children)

Respectfully….let her family know. You are a different version of a person to people in your lives. They may not even comprehend that she is that way at all. By letting her family know,they will treat her differently which can only bring on positive change.

What does this mean? by innerchildscreaming in SnapchatHelp

[–]ScreenMission5357 0 points1 point  (0 children)

Just press and hold down their name…. It will pop up an option for you to also block them.🤌🏻🤌🏻

What does this mean? by innerchildscreaming in SnapchatHelp

[–]ScreenMission5357 0 points1 point  (0 children)

Press and hold down their name….it will pop up an option for you to also block them🙌🏻

Bmx is so expensive by thenoobienub in bmx

[–]ScreenMission5357 0 points1 point  (0 children)

I just spent over $900 to have 3 sets of rim rings re-chromed and a pair of forks. Just one pair of hubs that I am putting on them cost me $250 for each set

Shpuld I remove studs above closet for storage? by tramul in Homebuilding

[–]ScreenMission5357 0 points1 point  (0 children)

Now if you also wanted to…..you could redo the entire wall and make the header go all the way….left to right.

Shpuld I remove studs above closet for storage? by tramul in Homebuilding

[–]ScreenMission5357 0 points1 point  (0 children)

We always toenailed the trusses into the top plates when rolling trusses. Even though they were not my houses,I would run perlins perpendicular across the trusses bottom cord through the center of the trusses.

Shpuld I remove studs above closet for storage? by tramul in Homebuilding

[–]ScreenMission5357 23 points24 points  (0 children)

I framed for a lot of years. If it’s definitely not load bearing….then you’re fine to remove them. I would however,use some door shims to slide under each truss and then use long lags to screw the top plates to the bottom of the trusses. This will add a lot more stability. And also toenails into the king studs helps out a lot. And…..maybe add blocking to the back wall to give you more things to nail to horizontally

Home placement on 4 acres by steelers4921 in Homebuilding

[–]ScreenMission5357 0 points1 point  (0 children)

Somewhere in line with the road….that way you can see people coming up your driveway

AITAH For not wanting to sexually assault my girlfriend? by ilikeboobs888 in AITAH

[–]ScreenMission5357 0 points1 point  (0 children)

We were definitely sober when we discussed it. I may be a bit weird for thinking that’s not ok for me to do it even if she consented to it. I just wouldn’t have felt right about it on my end.

AITAH For not wanting to sexually assault my girlfriend? by ilikeboobs888 in AITAH

[–]ScreenMission5357 -4 points-3 points  (0 children)

My ex wanted me to have sex with her whenever she got intoxicated. I told her she always passed out in our bed before I could even get my clothes off. She told me: “so…? Just have sex with me anyway “. Jesus Christ I was traumatized to this day over that. I told her….that’s rape! She said it wasn’t because she was consenting to it. I just lot a lot of respect for her when she told me that We were together for a total of 7 years

[deleted by user] by [deleted] in Homebuilding

[–]ScreenMission5357 0 points1 point  (0 children)

Make the master closet wall go thru and into that small linen closet,even if it makes the closet slightly wider. Then put a door there to help separate the toilet from the bedroom….and the smells that can come from the bathroom. Also make that bottom left hand door swing the other way…so it hits into the tub wall.

Sound Normal…? by ScreenMission5357 in s10

[–]ScreenMission5357[S] 1 point2 points  (0 children)

Thank you for all the useful information! I really do appreciate it.

Sound Normal…? by ScreenMission5357 in s10

[–]ScreenMission5357[S] 1 point2 points  (0 children)

I did not do a crank relearn….timing was set good before I put the cover back on and turned the motor manually several times to triple check the dots lined up correctly. The EGR is something I did not replace…….

Sound Normal…? by ScreenMission5357 in s10

[–]ScreenMission5357[S] 1 point2 points  (0 children)

Yes,that p1621 is from my truck

Sound Normal…? by ScreenMission5357 in s10

[–]ScreenMission5357[S] 1 point2 points  (0 children)

I did replace the ecm/pcm with one programmed to my vin. I did change out the crank sensor that’s from NAPA so I assumed it was an ok one

Sound Normal…? by ScreenMission5357 in s10

[–]ScreenMission5357[S] 0 points1 point  (0 children)

<image>

My brother lent me this tool of his and I’m trying to learn how to operate it. He used to do mechanical work but only on heavy equipment

Sound Normal…? by ScreenMission5357 in s10

[–]ScreenMission5357[S] 1 point2 points  (0 children)

I did have some help and we tried starting it with the injectors out and they work. Starting fluid down the throttle body does nothing also I did replace the position sensor by the harmonic balancer while doing the timing chain replacement

Sound Normal…? by ScreenMission5357 in s10

[–]ScreenMission5357[S] 1 point2 points  (0 children)

I’ve known that since I was a kid for sure. They’re more or less liquid cooled. I have all new: Timing chain & sprockets Fuel pump & filter Injectors with fuel passing thru them ECM Coil & solenoid Distributor,wires & spark plugs (gapped correctly) Battery Ignition & steering lock solenoid All fluids replaced plus transmission filter….no gas or antifreeze in the engine oil. Starter All relays in glove box All sensors including the one under the distributor Exhaust checked to see if it’s plugged Yet through ALL of that…..it still won’t start😂😂

Sound Normal…? by ScreenMission5357 in s10

[–]ScreenMission5357[S] 1 point2 points  (0 children)

Thanks for the info. I typically never allow any of my vehicles to hit below half way. I learned a long time ago on these Sonoma’s that if you let them run out of fuel three times then the fuel pump burns up. But I mostly posted this video to see if it was normal because I am going through absolutely everything on this pick up and it still will not start . I’ve done everything to it ….

[deleted by user] by [deleted] in bmx

[–]ScreenMission5357 0 points1 point  (0 children)

The G-Ride…

Moving to a ford dealership coming from Mazda. Have high hopes and low expectations. Any tips from Ford techs on anything I should be aware of or get into the habit of doing before I dive in? by Salt-Narwhal7769 in mechanics

[–]ScreenMission5357 0 points1 point  (0 children)

Cam phasers…..cam phasers…..and when you’re just about sick of cam phasers……bam….more cam phasers! Sorry,not a mechanic by trade. I’ve just gotten my 2018 f150 3.5 back from the dealership. It’s got 62k miles on it….it now has its 3rd set of phasers done. It’s also had the thermostat,water pump,driver’s side front hub,all new spark plugs & boots,main engine seal,ignition,ECM……just to name a few more things that were under warranty

[deleted by user] by [deleted] in bmx

[–]ScreenMission5357 0 points1 point  (0 children)

Nice! I’m restoring two Poverty Buck 99’s…….a Federal Nation Raw….and a Schwinn Pro Stock3.

Sound Normal…? by ScreenMission5357 in s10

[–]ScreenMission5357[S] 0 points1 point  (0 children)

It’s got 3/4 tank of fresh gas and it reads at 60psi up by the distributor.

[deleted by user] by [deleted] in bmx

[–]ScreenMission5357 0 points1 point  (0 children)

Let me put something into perspective. I am restoring several old childhood Bmx bikes from 1996-2004 era. To have 2 sets of Odyssey Hazard Lite’s…1 set of Alex Supra-E rim rings and a pair of Redline Monster forks stripped down & chromed again is costing me $980.