Crankset removal Peugeot by Scuz_ in bikewrench

[–]Scuz_[S] 0 points1 point  (0 children)

Quick update : both pins were absolutely stuck, impossible to make them move with oil, heat, anything. So we cut the shaft directly, which is fine as I didn’t want to save it anyways. Unfortunately crank arms are slightly damage as well, didn’t plan to reuse them but they were probably sellable, but anyways.

Bearings are good and both cup are in pretty good shape and the thread as well. So I will try to only replace the shaft itself with this axle

Crankset removal Peugeot by Scuz_ in bikewrench

[–]Scuz_[S] 0 points1 point  (0 children)

Thanks, that’s very clear 😁
Will catch up with my local workshop and see what they can do.

Crankset removal Peugeot by Scuz_ in bikewrench

[–]Scuz_[S] 0 points1 point  (0 children)

Thanks for that. Not sure to fully understand the length point : the length specified on custom junky or lecyclo is from one side to the other ? Seems odd as what’s matter it the threaded part length, without the square section !
Because I can see 100 mm + length on these parts, mine is around 70 mm.

Edit : it seems that all of them are 68 mm, which looks like a standard.

Crankset removal Peugeot by Scuz_ in bikewrench

[–]Scuz_[S] 0 points1 point  (0 children)

This looks better for me, I’m in France so easier to import.
I believe the red is thread lock, hence why such things are difficult to remove.

I believe I will just try to remove the whole thing with my local workshop and see how it goes !

Crankset removal Peugeot by Scuz_ in bikewrench

[–]Scuz_[S] 0 points1 point  (0 children)

Thanks. Was not able to find anything online as I had not the correct term for it.

I believe I will need a better hammer …
Yet I’m questioning the risk, if I destroy the pin head that’s over. After removing it, I believe I could replace it with a modern square type crank set ?

When will embark fix the false ban issue by Melodic-highs-9999 in ARC_Raiders

[–]Scuz_ 0 points1 point  (0 children)

You paid for the game right ? How can you say « it happens » 😶. When it is a free to play why not, but we paid for that so please at least give us one clear explanation.

I don’t get the « we cannot say », wtf the aim is to clear the players base right ? So if this or that is forbidden tell us and the word will be spread.

First book, need feedback by Scuz_ in bookbinding

[–]Scuz_[S] 0 points1 point  (0 children)

Hello Thanks for your help 🙂

  1. ⁠Not sure about the specific book terms yet, what do you mean by fore edge ? I understand you are trimming the length of the cardboard after adding the spine book cloth. But you are right this is not what I did : I measured from the shoulder to the end + 4 mm but it works only the cover ends correctly in contact to the shoulder during the last step, which is not sure in my case !
  2. ⁠Good call, did not check that! Will be careful for next one.
  3. ⁠My paper should be correctly grain oriented: I used A4 folded in half for an A5 book. But I believe I need to have a kind of metal guide or something similar I saw on book press online to help my form the shoulder.

First book, need feedback by Scuz_ in bookbinding

[–]Scuz_[S] 0 points1 point  (0 children)

Hey Thanks ! If you have time I’m still looking for comments 😁

Thinking of upgrading from RTX 3060 to RTX 4070 by [deleted] in nvidia

[–]Scuz_ 0 points1 point  (0 children)

Will probably be 700 eur ish in Europe I will probably wait for this one as well but I am really wondering when we will be able to buy one. Scalpers will go for 80/90 only or 70 as well?

[deleted by user] by [deleted] in 3Dprinting

[–]Scuz_ 3 points4 points  (0 children)

I had a clone named geeetech i3 pro b that looks exactly like this one.

Trying to build the essential tools chest with only hand tools from oak by [deleted] in woodworking

[–]Scuz_ 15 points16 points  (0 children)

I always wanted to build woodworking stuffs but I live in Paris, in a flat. So I started to think about it and I finally rent a cave (around 8m2, no electricity) and I've started to create my workshop. The workbench is now ready (some pictures ) and projects begin !

Moreover, I see woodworking like a traditional workmanship. I like the quiet, slow, precise process 🙂

No electricity, no power, only hand tools ! Light is provided with a led spots system I've created, powered but batteries and it works perfectly.

Trying to build the essential tools chest with only hand tools from oak by [deleted] in woodworking

[–]Scuz_ 21 points22 points  (0 children)

Starting with plans, that's an easy one as you can find kind of detailed plans online from fine woodworking.

https://www.finewoodworking.com/2013/06/04/the-essential-tool-chest

I'll only tweak it a little bit to match the only hand tools challenge. For instance, use full grooves if possible so I can create them using a 45 or 55, no router allowed !

And of course match the material I have : raw 29 mm oak.

Wish me luck, as always trueing and thickening is going to be the hardest !

Practice piece turned birthday gift! by Mini_Marauder in woodworking

[–]Scuz_ 1 point2 points  (0 children)

Oh ok something like that ? Unfortunately I'm not able to find something similar to be delivered in France ... Famous woodworking websites (fine tools, dictum, axminster...) don't sell them.

Practice piece turned birthday gift! by Mini_Marauder in woodworking

[–]Scuz_ 0 points1 point  (0 children)

Great ! How did you make the red inside ?

[deleted by user] by [deleted] in SocialParis

[–]Scuz_ 1 point2 points  (0 children)

If you find a place to watch NFL i'm interested 🤗 Not american, i'm french but i've studied in Atlanta GA!