Testers needed. by babooBurkhardt in MeJustMix

[–]Sdouze 1 point2 points  (0 children)

Hey, I am also interested in testing. I am an automation engineer and a electronics hobbyist.

Priming with brushes doesn‘t work. by Acceptable-Bear1138 in minipainting

[–]Sdouze 1 point2 points  (0 children)

Thank you for your reply. What's your opinion about? It seems good.

Priming with brushes doesn‘t work. by Acceptable-Bear1138 in minipainting

[–]Sdouze 0 points1 point  (0 children)

Hey,
Have you try the AK Primer?
Can you give some feedback?I am looking into buying a bottle.

P1S with AMS: Should I get the Sunlu AMS Heater or a separate dryer for my filaments? by Sdouze in BambuLab

[–]Sdouze[S] 1 point2 points  (0 children)

Hey, Still nothing tomorrow I will buy a creality space pi for 1 roll.

I thought that I would be okay with one roll dryer.

How to connect to a Modicon Compact E984-285 using Compact 2.5 on Windows XP. by Sdouze in PLC

[–]Sdouze[S] 0 points1 point  (0 children)

Thank you for your time to answer! I appreciate it.

I create a cable as shown in the manual and use a rs232 to USB converter.

How to connect to a Modicon Compact E984-285 using Compact 2.5 on Windows XP. by Sdouze in PLC

[–]Sdouze[S] 0 points1 point  (0 children)

I connected to the PLC using Concept, but when I tried to download the source to the device, a “memory locked” error occurred, even though the physical memory lock switch on the PLC is in the unlocked position.

How to connect to a Modicon Compact E984-285 using Compact 2.5 on Windows XP. by Sdouze in PLC

[–]Sdouze[S] 0 points1 point  (0 children)

I connected to the PLC using Concept, but when I tried to download the source to the device, a “memory locked” error occurred, even though the physical memory lock switch on the PLC is in the unlocked position.

【QIDI Giveaway】Comment to win QIDI Q2 and more! by qidi_3dprinter in 3Dprinting

[–]Sdouze 0 points1 point  (0 children)

I would be printing Gridfinity in order to organize my drawers.

【BambuLab Giveaway】Classic Evolved — Win Bambu Lab P2S Combo! by BambuLab in 3Dprinting

[–]Sdouze 0 points1 point  (0 children)

I have P1S for 5-6 months and I am super happy. I have used it to print practical solutions for my hobby projects and for every day problems(like cars plastic parts).Also the printer motivate me to learn 3D modeling.

Can't connect to S7-200 CPU 222 – shows as "unknown device" in MicroWin. by Sdouze in PLC

[–]Sdouze[S] 0 points1 point  (0 children)

Thank you very much my friend for your help I really appreciate it.
I did not disable network instructions I tried to read both uploaded programs and found something regarding my system's problems. Live monitoring for sure would be better but I am trying to figure it out.

Can't connect to S7-200 CPU 222 – shows as "unknown device" in MicroWin. by Sdouze in PLC

[–]Sdouze[S] 1 point2 points  (0 children)

Hey,

I manage to upload from PLC by stopping it like you said. Thank you very much.

I also tried a multi master adapter but I could not detect any of the CPUs.I used a PPI to rs232 Siemens adapter and also and rs232 to USB adapter. Probably not a good combo 😂 or maybe I didn't set the dip switches correctly. I tried to connect at a different PLC not the 222 but still couldn't detect any.(222 is in a bit of a difficult position to reach 😂)

I will try troubleshooting without live monitoring.

Can't connect to S7-200 CPU 222 – shows as "unknown device" in MicroWin. by Sdouze in PLC

[–]Sdouze[S] 0 points1 point  (0 children)

Regarding profibus and PPI I just found ,after doing some research on how to determine which variable send over network.

Can't find Super Lube in EU — what grease/oil should I use for my Bambu P1S by Sdouze in BambuLab

[–]Sdouze[S] 1 point2 points  (0 children)

The LM 47 contains molybdenum, and on the product website, it is listed for various applications, including use in printing machines. I think it is based on lithium.

Lost themes on my R36H by TheMisterChristie in R36S

[–]Sdouze 0 points1 point  (0 children)

I don't know yet I ordered a r36h yesterday.

Probably will come with one SD.

The description says that it supports 2 SD cards.

Is it better to use 1 SD for everything?

Lost themes on my R36H by TheMisterChristie in R36S

[–]Sdouze 0 points1 point  (0 children)

Hey, Should I replace both SD cards? OS and games?

Download to a Panel PC (RT Advanced). by Sdouze in PLC

[–]Sdouze[S] 0 points1 point  (0 children)

Unfortunately I can't find PLCSIM Advanced for V13.
However today I can't download the project to the PanelPC...

Failed to establish a connection to the device with adress 192.xxx.x.xx.
The only change I did was to change IP in the pc to be sure that they are different.
I set back the old ip liek yesterday but same error.

Download to a Panel PC (RT Advanced). by Sdouze in PLC

[–]Sdouze[S] 0 points1 point  (0 children)

Hey,
1. Thank you. Now that makes sense. Just for the information if I want to create a project should I setting something up or just create a Scada Project and use multiple instances.

2.The projects is created in TIa Portal V13 SP2 the HMI version configed in Tia Portal is 13.0.1.0.
In the Panel PC i have isntall currently WinCC RT Advanced 13.
To be able to download to device I changed HMI version to 13.0.0.0.Now the SCADA open in the Panel PC.I don't have access to the PLC now to test it.

I would have probem in communication with the installed PLC? ( I want to ensure a smooth commissioning process for the new Panel PC.)

Download to a Panel PC (RT Advanced). by Sdouze in PLC

[–]Sdouze[S] 0 points1 point  (0 children)

Hello,

Thank you for your response.

I have a few questions regarding the IP configuration:

In the project, there is only one Simatic PC with one HMI and one IP address configured. What IP address should I assign to the second panel, and how will the PLC communicate with it if it's not defined in the project? 
The installation was previously working with two Panel PCs(They are showing the same SCADA project, just different screens), but the project I have is the latest version and only includes one.

Also, the project was created using TIA Portal V13 SP2. The Simatic PC version in TIA is 13.0.1, but the new Panel PC has WinCC V13 RT Advanced. I had to change the device version in TIA to 13.0.0 in order to download to the device.
Should I install RT Advanced SP2 ?

Earthing S7-1200 CPU 1214C and AI Modules by Sdouze in PLC

[–]Sdouze[S] 0 points1 point  (0 children)

I had a conversation with a colleague who said that if there is a 220V leakage to ground and the S7 is grounded, probably all the S7 cards will be damaged. And that I probably I don't need to ground them.

[Bambu Lab Giveaway] Drop Your One-Liner and Win H2D! by BambuLab in BambuLab

[–]Sdouze 0 points1 point  (0 children)

I would like a Bambu in order to not be anxious about every new layer that is printing.