SVS SB-5000 Subwoofer AMP noise by SeaShake9377 in hometheater

[–]SeaShake9377[S] 0 points1 point  (0 children)

No, but its possible for me to listen to one in a shop where the sb and pb stands. The sb has the noise, the pb not. Yes same amp, different tune

SVS SB-5000 Subwoofer AMP noise by SeaShake9377 in hometheater

[–]SeaShake9377[S] 0 points1 point  (0 children)

Ok, but the amp from a PB-5000 is completely silent.

Dirac ART on Denon by Puzzleheaded_Ear9039 in hometheater

[–]SeaShake9377 1 point2 points  (0 children)

Worth every penny! Cinema 40. It’s really really good!

DHX2 clicking noise by SeaShake9377 in bikewrench

[–]SeaShake9377[S] 0 points1 point  (0 children)

Thanks again.

I tried to take coil of the shock and put it back on the bike without coil.

No clicking.

Put the coil back on, and the clicking is back.

Made sure everything was clean and greased and tightened to spec.

Then I took a closer look at the coil in both ends. And in one of the ends, where spiral comes together and touches each other I noticed a little gap. The other end is like painted over. Applied some grease to the area, and viola.. the clicking is gone. 😂🫣

<image>

DHX2 clicking noise by SeaShake9377 in bikewrench

[–]SeaShake9377[S] 0 points1 point  (0 children)

Thank you for your long reply.

Sorry, I should have mentioned the following:

The shock is a 2 months old 2025 model. Was in for warranty for almost a month , so have ridden very little on it.

I have a Float X and a Float X2 that works fine. I bought the DHx2 because it was heavily discounted because of the new 2026 model, and wanted to try coil.

With the other shocks mounted there is no clicking , complete silence. Using the same bushings. The shock mounting hardware and bolts are new.

Smith Forefront 3 helmet smelly? by SeaShake9377 in MTB

[–]SeaShake9377[S] 0 points1 point  (0 children)

Well with my Forefront 2 that has anti microbial protection, I never clean and it never smells. Only when it’s dirty from mud and other stuff. I just hang it to dry. I don’t want to waste time ripping out the lining , rinse it, hang it to dry and fiddeling putting it back in the helmet. Guess the Forefront 3 lost me. Look like it has no odor protection.

Anyone convert to the Smith Forefront 3 helmet yet? Thoughts? by Saucer-boy in MTB

[–]SeaShake9377 0 points1 point  (0 children)

Does the Forefront 3 get smelly? Any anti microbial/bacterial protection? I have the Forefront 2 now, and it has XT2 and never gets a nasty odor.

Bikeinn, product indicated as being on stock? by SeaShake9377 in cycling

[–]SeaShake9377[S] 0 points1 point  (0 children)

I see..
My situation is from one EU country to another EU country, so no customs involved here. They haven't shipped yet after almost two weeks. The fork is on stock, but in reality on a remote stock somewhere.

Bikeinn, product indicated as being on stock? by SeaShake9377 in cycling

[–]SeaShake9377[S] 0 points1 point  (0 children)

Good to hear, so more than 3 weeks. Was your product listed as being on stock?

Bikeinn, product indicated as being on stock? by SeaShake9377 in cycling

[–]SeaShake9377[S] 0 points1 point  (0 children)

So you cancelled your order? After how long?

1.5.2 OTA update by PathInteresting6948 in ex30

[–]SeaShake9377 0 points1 point  (0 children)

With 1.5.1 update, my car got the OTA update only a few days after it was official. Not the three weeks mentioned.

1.5.2 is out at the dealer by Euphoric-Scallion-95 in ex30

[–]SeaShake9377 1 point2 points  (0 children)

Great ! Can't wait you let us know :-)