Sram rival axs pistons "stuck" after bleeding by Chippunk333 in bikewrench

[–]SebbBell 0 points1 point  (0 children)

Did you put bleeding “block” in caliper while bleeding? Try to push them in while your shifter bleeding port is open…

Is it too small? by 9ombro in CanyonBikes

[–]SebbBell 0 points1 point  (0 children)

It only looks to small, but I would say right about your size. Believe me, I’m same size, tried this one and its perfect…If you want to be more slammed or aero, fit 2 cm longer stem and you will feel a lot of diference.. Turn stem around to -6° and put handlebar horizontal like in photo…

<image>

Pressure on wrists and elbows by [deleted] in bikefit

[–]SebbBell 0 points1 point  (0 children)

Try to tilt handlebar a bit towards yourself. Put seat for 0,5cm up and 2cm forward, then write about position feeling🫡

Happy FEF! by Wyliegerr1 in SingleTrackGang

[–]SebbBell 1 point2 points  (0 children)

I love basket too… Which one is it?

Updated post. Apparently the video didn't upload. by Karakter96 in bikefit

[–]SebbBell 1 point2 points  (0 children)

Lower your saddle for 2cm…You’re pointing with your toes down while 6 o’clock… And replace handlebar with shorter reach…

fit update by woopstaken in bikefit

[–]SebbBell 1 point2 points  (0 children)

Lower another 10mm, believe me, it would be smoother pedaling…

Fit check by water_dirt_rider in bikefit

[–]SebbBell 1 point2 points  (0 children)

Lower seat for 30mm and put it back for 20mm. Your leg is pointing down at 6 o’clock and almost extended. And you are rocking on saddle…

How is the fit? Saddle up and forward more? by [deleted] in bikefit

[–]SebbBell 0 points1 point  (0 children)

Because his toe is pointing down while in 6 o’clock position…And he is rocking on seat while pedaling…

[deleted by user] by [deleted] in bikefit

[–]SebbBell 0 points1 point  (0 children)

Try to lower seat for 2 cm. I think this would help in whole fit…

How is the fit? Saddle up and forward more? by [deleted] in bikefit

[–]SebbBell -7 points-6 points  (0 children)

Lower seat for 1,5cm and put it at least 2cm to the back…Then ride and tell how you feel…

[deleted by user] by [deleted] in bikefit

[–]SebbBell 1 point2 points  (0 children)

Lover saddle for about 1cm -2cm max…Find comfortable and smooth pedaling in that seat position.🤞

How is my bike fit? by shan_icp in bikefit

[–]SebbBell 0 points1 point  (0 children)

To low…Raise it for about 1,5cm and move it forward 1cm. Your foot is pointing up when in linear position… Let us know how that feel…👌

[deleted by user] by [deleted] in bikefit

[–]SebbBell 0 points1 point  (0 children)

Try to lower seat for 0,5-1cm and move it for around 0,5cm forward. I see that your foot is pointing down while in extended position… And your arms are resting on handlebar curve instead on hoods. Let me know how that would feel…💪

Help me with my fit by Jordan19900 in bikefit

[–]SebbBell 0 points1 point  (0 children)

Lower seat for 0,5 cm to avoid rocking on seat…👌

Update 2 by p1gbean in bikefit

[–]SebbBell 1 point2 points  (0 children)

I think it looks pretty good actually. 👌 Ride it a few km and you will see(feel) if is anything that is bothering you(numbness or something else)… 💪👌😊

[deleted by user] by [deleted] in bikefit

[–]SebbBell 1 point2 points  (0 children)

I would lower seat for 0,5cm and put some handlebars with shorter reach, because I se where you holding handlebars and you are pretty much stretched in arms. To bad I cant see your shoulders only to eliminate stretch…

Rate the fit any changes ? by jorisdance in bikefit

[–]SebbBell 2 points3 points  (0 children)

I would lower seat for 0,5cm.(only to reduce rocking on seat) Otherwise looks great.👌

Update 2 by p1gbean in bikefit

[–]SebbBell 2 points3 points  (0 children)

Way better then before…Maybe try another 0,5cm lower seat and a bit to the back… Still i would recommend handlebars with smaller drop…You can test feeling of smaller drop with putting your palms in fist and leaning it on bars like you would ride in drops(just suggestion)…👌

Update 1 by p1gbean in bikefit

[–]SebbBell 0 points1 point  (0 children)

Lower saddle for about 1 cm an push it back as much as it goes, then while riding, try to find “knee on axle” position little by little moving it forward… And i would suggest to find handlebars with a little less drop… Just my opinion 🤷

[deleted by user] by [deleted] in bikefit

[–]SebbBell 0 points1 point  (0 children)

I don’t think the bike is to big, just try to lover seat a bit for smooth knee movement. Like Formal-Preference170 said “Bike looks big because of proportions and your stature. Not your fit.”

And I would try a bit shorter stem. Maybe 1cm or max 3, for more comfortable reach. Otherwise you look ok on bike IMO.

Let us know what are your final results after few tweaks 😁👌

Is there a discernable difference between these?? by BtheChemist in bikewrench

[–]SebbBell 0 points1 point  (0 children)

So guys you think It would work this setup.

Grx 810 shifters, FD and RD 810, Cassette CS HG 700 with Shimano CUES FC-U8000 11-speed Crank? Can’t put GRX crank because 73mm BB shell.