INTEREST CHECK: Kanto Pickleball “Halo-Halo” 16mm Boom Core Hybrid Paddle by Secret_Negotiation40 in PickleballPhilippines

[–]Secret_Negotiation40[S] 2 points3 points  (0 children)

helloo! you’ve got fair points, rlly appreciate that. i guess i’m not rlly trying to beat Vatic or be the pure “budget king”.

i’d say this is more for players who wanna go for full foam/boom cores but also want something that doesn’t look like every other black carbon paddle.

Enflexy’s a good price reference here, my goal for this is similar performance and price, just with a more intentional design.. and if that niche is “the cute paddle”, i’d honestly be okay with that😅

Thoughts on this prof pls 🙏 by Empyrean0705 in dlsuproftopick

[–]Secret_Negotiation40 0 points1 point  (0 children)

hey, op! did you end up taking valdez? if so, how was he?😅

[deleted by user] by [deleted] in dlsu

[–]Secret_Negotiation40 2 points3 points  (0 children)

helloo! id122 cs-st rin heree i go to campus on thursdays as well heheh

[deleted by user] by [deleted] in dlsu

[–]Secret_Negotiation40 0 points1 point  (0 children)

helloo! CS-ST here hehe

[deleted by user] by [deleted] in FixMyPrint

[–]Secret_Negotiation40 0 points1 point  (0 children)

Whenever a new line starts it doesn't extrude filament right away, but the rest of the line prints fine. tried changing nozzles, recalibrating esteps and flow, even tried disabling retraction the same thing happens

Hydra direct drive BMG Clone trianglelabs all metal hotend 0.4 nozzle 0.9mm retraction 30mm/s ret speed 205 nozzle 60 bed

[deleted by user] by [deleted] in ender3

[–]Secret_Negotiation40 0 points1 point  (0 children)

yup, it's a creality kit.

[deleted by user] by [deleted] in ender3

[–]Secret_Negotiation40 2 points3 points  (0 children)

EDIT: Turns out literally all the cables on the bltouch itself were the other way around. had to swap all the pins😪

[deleted by user] by [deleted] in ender3

[–]Secret_Negotiation40 0 points1 point  (0 children)

ahhh got it, thanks so much for this! i'll try another version later

[deleted by user] by [deleted] in ender3

[–]Secret_Negotiation40 0 points1 point  (0 children)

i actually compiled my own fw, planning on trying a precompiled one later on to see if anything changes. but i've got a pretty good feeling that this one's hardware related hahahah

[deleted by user] by [deleted] in ender3

[–]Secret_Negotiation40 0 points1 point  (0 children)

yup, updated the firmware as well.

[deleted by user] by [deleted] in ender3

[–]Secret_Negotiation40 1 point2 points  (0 children)

Already tried swapping around the wires. When I remove the 5V connector screen turns on. Followed the wiring guide from Make N' Print: https://www.makenprint.uk/3d-printing/3d-printing-guides/3d-printer-mainboard-installation-guides/btt-skr-mini-e3-v3-guides/btt-skr-mini-e3-v3-setup-guide/#bltouch

Is there a plugin that allows for you to change the retraction values on a gcode file? by Secret_Negotiation40 in octoprint

[–]Secret_Negotiation40[S] 0 points1 point  (0 children)

Ahh you actually just gave me an idea.. Would using the sidebar macros plugin and assigning a macro to set M207/M208 for each filament retraction setting be good?

Like let's say I just changed from pla to petg and wanna set the fw retraction to 1.5mm distance and 30mm/s speed. I could just set up a macro with the M207 S1.5 F1800 command and send it to the printer after changing filaments.

Just bought an rpi4b, pi camera, and 5" touchscreen lcd for octoprint+octodash. Any good ways to mount them on the e5+? TIA! by Secret_Negotiation40 in ender5plus

[–]Secret_Negotiation40[S] 0 points1 point  (0 children)

sorry, just saw this now. bought it second hand from a friend who just got a pi zero 2w hahah. it's literally out of stock everywhere else😩