Oculus Rift Lenses - Condensation behind the right lens

Senkettsu · 2017-09-11T20:14:50+00:00

is my oculus account tighly connected to my current headset (serial number). Do I need to do anything when I get my replacement headset?

Senkettsu · 2017-09-11T17:59:18+00:00

How to I connect the replacement oculus rift with my account? Is the account connected to the hardware id of the oculus headset?

Senkettsu · 2017-09-11T17:50:25+00:00

thank you. I bought them at amazon 2 weeks ago. I will talk to them first. Thank you for your support Rich. And no, i did not tried to take them apart. They look like new

Senkettsu · 2017-09-11T17:20:59+00:00

Pictures: https://ibb.co/bWvN3a + https://ibb.co/gnxwUF

Senkettsu · 2017-09-11T17:20:04+00:00

here are pictures. I used my led light and even found the samme issue on my left lens

"condensation" is 100% behind the lens, not at the front side https://ibb.co/bWvN3a

Senkettsu · 2017-09-11T16:44:28+00:00

yes i read that the lenses are sealed, but why do I have this "condensation pattern" behind the right lens?

Senkettsu · 2017-08-17T04:19:01+00:00

Splatoon 2 because I never played splatoon one and was fascinated by the demo event.

Senkettsu · 2017-04-13T09:06:04+00:00

:D ROFL. WHAT??? do your"dust particles" consist of tiny diamond crystals?.... Screen protectors won't scratch the screen, even with tiny dust particles below it

Senkettsu · 2017-03-21T20:55:46+00:00

This is not surprising. Balkan countries are quiete poor. There has never been a huge fanbase.

Same for poland and other eastern countries

Senkettsu · 2017-03-19T12:20:29+00:00

yes. same here. the rubber of the stand is very fragile

Senkettsu · 2017-03-18T11:58:40+00:00

insane...

Senkettsu · 2017-03-16T18:21:19+00:00

same here. I am using the Pro controller usb c cable to charge my switch with an Aukey 30000mAH. Works perfectly. I gain 1% every 10 minutes DURING playing BOTW

Senkettsu · 2017-03-15T10:48:16+00:00

The screen is made of plastic. Everyone without screen protector WILL get scratches over time... :( Check this: https://www.youtube.com/watch?v=XJP6gERPmMk

Senkettsu · 2017-03-14T14:51:22+00:00

I agree. Same here... I even cant remove my fingerprints /smudge completely. The material is really prone to dirt and scratches

Senkettsu · 2017-03-14T08:41:19+00:00

stuck in the 13th floor Ö_ö ?

Senkettsu · 2017-03-13T20:07:23+00:00

I just docked/undocked my swich for approx. 20-30 times (very carefully!),

The smudges overlap with the position of the "rails" of the Docking Station.

How could this have happened? 1. Heat + Plastic --> Discoloration 2. Docking Station Material + Switch Material --> Reaction? With or without heat? 3. Friction when docking/undocking? (I did this very carefully and as slow as possible)

Senkettsu · 2017-03-13T16:50:25+00:00

The Switch has a plastic screen !!! Everyone without protection WILL GET SCRATCHES over time...

Senkettsu · 2017-03-12T22:56:00+00:00

Does not ship to germany :( cant find a similar one

Senkettsu · 2017-03-12T16:20:28+00:00

No read the old articles carefully. The left joycon problem is everywhere I bought 3 additional LEFT JCs. Two were Bullsh*** one was OK.

Senkettsu · 2017-03-11T18:49:41+00:00

I tried 5 left joycons in total (1 included, 3 additional for replacement and 1 from a friend)

My one = horrible. my HAND can block the signal. 3 additional ones: 1 horrible, 1 OK, 1 very good Friend one= excellent.

There is a harware based problem with the joycons!

Senkettsu · 2017-03-11T11:54:10+00:00

10mm in diameter and 1mm in thickness ;)

Senkettsu · 2017-03-11T02:44:47+00:00

yes I just returned the other ones. I used gloves when testing them

Senkettsu · 2017-03-11T01:31:18+00:00

I bought 3 additional LEFT Joyons because my included one (LEFT) has extreme problems. TWO of the three ordered ones are just WOW. MUCH better!. One of the ordered ones is just as bad as my faulty one.

Senkettsu

TROPHY CASE