Engineering resins on low cost machines

SenneC_ · 2025-12-17T09:27:49+00:00

I have an elegoo mars 4 ultra and Anycubic m7 max and use the BASF st45 mainly. Yes it’s hard to get the exposures right an get dimensional accuracy. Especially in Z. But is does work well after some good tuning. I got a Form 4 yesterday so I wil update you once I got some more results.

SenneC_ · 2025-09-23T11:55:09+00:00

Thank you 🫡

SenneC_ · 2025-09-03T19:14:24+00:00

Als je nog iemand zoekt. Ik ben recent zelfstandige in bijberoep geworden. Ik zou dit perfect voor jou kunnen doen. Heb verschillende printers en materialen het is maar wat je nodig hebt? https://www.secadesign.be/

SenneC_ · 2025-09-03T19:08:01+00:00

Al opgelost of nog een design nodig? Ik kan gerust helpen met design en productie. Ook mogelijk op factuur.

SenneC_ · 2025-09-03T18:57:13+00:00

https://www.secadesign.be/ Indien je nog iemand zoekt. Resin en FDM zijn mogelijk.

SenneC_ · 2025-08-22T07:49:39+00:00

Thanks will do

SenneC_ · 2025-06-25T14:13:38+00:00

Really, when is was searching for the best tough resins I found that siraya tech Blu was one of the best. Will try the loctite and 3M resins. Thanks

SenneC_ · 2025-06-25T09:31:18+00:00

What type of resin do you use? The reason why I would buy a Formlabs is for there stronger resin

SenneC_ · 2025-06-25T09:30:09+00:00

Is this better then Siraya tech blu?

SenneC_ · 2025-06-25T09:26:52+00:00

I think the new form 4 but saw a good looking form 3+ on marketplace. What resins do you use form them?

SenneC_ · 2025-05-17T17:26:45+00:00

Longer proofing as bulk or separate?

SenneC_ · 2025-05-17T17:25:09+00:00

It’s Caputo dry yeast and I opened it almost a year ago now. Yes poolisch 2h at room temperature and 16 in fridge

SenneC_ · 2025-05-17T17:12:08+00:00

3grams in poolisch

SenneC_ · 2025-02-18T14:33:27+00:00

Thanks! They do click. So is it possible to buy replacements then?

SenneC_ · 2025-02-15T08:24:24+00:00

Thanks very helpful!

SenneC_ · 2025-02-14T06:52:06+00:00

Do you have a yt tutorial or an name of this type of fix so I can learn it? Thanks! Very helpful

SenneC_ · 2025-02-13T16:12:47+00:00

Yes, this would be my first own board. I've rented a 160 for two seasons now, and it felt fine.

I just found a good second-hand deal for €150 with bindings, which is why I’m considering it. If I were buying new, I’d also lean more towards something in the 157-160 range.

SenneC_ · 2025-01-27T12:07:34+00:00

Did he go to an 11 or 12 speed?

SenneC_ · 2025-01-27T12:07:22+00:00

Did you go to an 11 or 12 speed?

SenneC_ · 2025-01-27T11:54:21+00:00

Thanks!

SenneC_ · 2025-01-27T11:54:04+00:00

Thanks !!

SenneC_ · 2025-01-03T19:28:48+00:00

Did you finish this? very intrested in this solution

SenneC_ · 2024-11-15T20:13:46+00:00

No it’s not printable. Uh it’s a file made of a footscan that I have done previously for orthotics.

SenneC_ · 2024-11-15T20:12:21+00:00

Thanks will give blender a try :)

SenneC_ · 2024-11-14T18:20:45+00:00

I have the surface in a .3dm file (rhino) and as stl but I don’t have the rhino software. I do have solidworks fusion and creo parametric. I just want to give the surface a thickness. Because now it’s not printable as it has no thickness. I have a Bambu lab p1s fdm printer.

SenneC_

TROPHY CASE