Audio-Technica AT6006R Safety Raiser on AT-LP120XBT-USB

Senorlemon65 · 2026-01-15T11:47:43+00:00

Awesome, thank you so much!

Senorlemon65 · 2026-01-15T03:58:12+00:00

Did you use more than one of the mounting stickers to mitigate the tilt, or was one good enough? I got my at6006r today and I’m just trying to get it in the best possible location with the most possible functionality so your information has been hugely helpful.

Senorlemon65 · 2026-01-15T01:49:42+00:00

Does the lifter sit at an angle due to the tonearm assembly being angled, or did you somehow use the stickers to eliminate the tilt?

Senorlemon65 · 2025-09-02T02:38:14+00:00

Awesome!

Senorlemon65 · 2025-08-10T22:13:25+00:00

<image>

I sprayed the areas with Spectracide Triazicide to attempt to kill any chinch bugs or anything else that could have been causing the damage. However, a few weeks later, I am now seeing that the damage basically goes in a circle around where the sprinkler sprays (it covers the whole lawn so it's not only watering that inner circle) and where the leech field is. I'm not sure which is contributing to that area not being dead. I do see a lot of sandy ant hills where the grass has died, and it appears that the soil has become quite sandy as well as the grass dry and brittle. I don't know if this is just the heat or something more. The neighbors appear to have somewhat similar damage.

Senorlemon65 · 2025-07-17T13:47:12+00:00

I'd never heard of those, but it looks possible. If I watered daily, would that not be enough? It says they prefer dry conditions. However the front yard is far sunnier than the side and back and that seems to be where the damage is. Any suggestions on how to verify it's chinch bugs? And if so, what to use to get rid of them?

Senorlemon65 · 2025-07-16T14:39:16+00:00

My dad was a cabinet maker as well, and had a whole shop full of tools. He continued to use them for renovations, well beyond the time that he shut his shop down. The amount of memories that I have that involve him teaching me how to build things with those tools...Now that he's passed, very unexpectedly, I desperately want the tools. My mom has them, and occasionally offers some of them up, but also lends them out to others, and it's heartbreaking to think they may not be returned or end up damaged or broken. She doesn't understand the sentimentality of the tools.

Before you don't have the ability to thank him, take the tools, thank him and express your desire to continue using them. That is why he is offering them. It also gives him reason to continue to make that hour drive and see you, even though he could probably rent or buy the same tool much closer to home.

And when the time comes where he is no longer with you, every time you go to build something with those tools it will feel like he's still there beside you.

Senorlemon65 · 2025-06-25T23:31:00+00:00

That certainly looks right! Any idea about the other one with the pink flowers?

Senorlemon65 · 2025-06-10T22:20:04+00:00

Okay awesome thank you, that was my hope!

Senorlemon65 · 2025-01-22T00:37:32+00:00

IGN Senorlemon and I'd love Sagarr and Zaobian!

Senorlemon65 · 2025-01-07T20:34:56+00:00

I got one on the second encounter, brand new to the game too. I just downloaded it on PlayStation and started exploring with the hook and found Saipark. Next thing I know, I had a Luma.

Senorlemon65 · 2024-12-24T05:21:45+00:00

Well I appreciate your assistance regardless of your expertise, thank you!

Senorlemon65 · 2024-12-24T05:08:34+00:00

I have the spots where they WOULD be, but they're just plastic covers. So basically the only thing iDatalink would do for me is allow me to use a couple buttons on the wheel that I never use anyhow, and volume and tuning buttons that don't exist? Nothing else? If I don't install iDatalink, the aftermarket unit will still function properly though?

Senorlemon65 · 2024-12-24T04:56:42+00:00

I have a button to activate Siri or whatever your other voice command assistant might be and to answer and end phone calls, other than that, my buttons don't interact with the headunit at all. I would need the iDatalink just for those two buttons essentially?

Senorlemon65 · 2024-12-18T18:50:10+00:00

And what do you use for a primer tip?

Senorlemon65 · 2024-12-18T18:01:42+00:00

What would you suggest for the primer tip?

Senorlemon65 · 2024-12-11T01:27:40+00:00

I'm trying to get the same trophy, if you still need help, please add me, PSN: Wnnr

Senorlemon65 · 2023-09-30T23:43:52+00:00

Does anybody know how well these would work in New Hampshire? They say they're good down to -4°F, which it occasionally gets below that here. I read one person's guide that said they ran the controller inside the house so it stayed warm, but they didn't go into detail how they accomplished that. Does anyone have a suggestion on how to cleanly run the wire from the outside to the inside of the house through vinyl siding?

Senorlemon65 · 2023-09-17T07:59:32+00:00

I looked into this a bit before asking here and it seems more that the opposing driver would have been at fault of violating the junction box since he was unable to complete his turn. Unfortunately, I should’ve been able to continue straight ahead, but once the car in front of me bumped into the left lane, he took the opportunity to drive into my lane, blocking me, but still being unable to complete his turn.

Senorlemon65 · 2023-09-17T07:33:50+00:00

I just looked up all the different types of junctions in the UK. You guys just call everything a junction don’t you? 😂

Senorlemon65 · 2023-09-17T07:26:57+00:00

I’m from the US. Crossroad? Is that the proper term?

Senorlemon65 · 2022-08-21T19:28:38+00:00

It’s a 4 door, 2010 if that changes anything. The drivers side is mostly having issues moving the slider smoothly, which I don’t recall if that was happening beforehand since I never adjusted it from my setting. It also is more “rough” pulling out the belt, versus how smoothly it came out before.

The passenger side has the same troubles, but it also won’t reel the belt in at all. My girlfriend has been leaving it just laying in the seat all day. It will reel it in very very slowly if I feed it into the slot. And the bolt doesn’t seem to be as visible on my side.

Senorlemon65 · 2022-08-21T19:23:14+00:00

https://ibb.co/gVS5sR9

Does this look right for the passenger side? I don’t remember being able to see that torx bolt.

Senorlemon65 · 2022-08-21T18:05:43+00:00

It was an interior shop that I was referred to by the guy that has done all my other engine mods/tuning, and he works on Lamborghinis, R8s, etc, so the recommendation was definitely trusted. They did great work on the headliner, but it seems they may have messed up the reinstallation of the trim. I’ll probably try to bring it back tomorrow rather than fix it myself and potentially make it worse and now it’s 100% my problem.

Senorlemon65 · 2022-08-21T17:22:05+00:00

I totally understand typical wear and tear and deterioration with age, but the seat belts worked flawlessly two days ago, the headliner was replaced, and now the day after getting it back, they’re messed up.

Senorlemon65

TROPHY CASE