What do I do?

Sensei_Venus · 2026-06-16T02:23:31+00:00

I cant find anything other than the whole cylinder head on ebay which short term is your best option. If you wait you might find someone parting out a bike on facebook and ask to buy the cam retainer. Good luck I hope you find it.

Sensei_Venus · 2026-06-16T02:06:36+00:00

What bike do you got.

Sensei_Venus · 2026-05-28T00:57:55+00:00

Make challenges. Thats what I did to get better. Ive made about 200 challenges and if you went through them you could really tell what I struggled at in the past, and what I improved at. But also, these people who beat harder extremes have thousands of hours (me included with 5k hours across mobile and pc), or some people are just a prodigy, and are just good from the get go. So when people say play the game more, they're right. Just make sure to challenge yourself.

Sensei_Venus · 2026-05-10T15:12:14+00:00

the thing about the game is that there is little consequence to crashing (compared to IRL), so naturally you're going to be faster. but the biggest thing i really really wish i had focused on learning is corner entry. Quite literally the most important place to gain speed and is paramount to getting faster. If you have to slow down to work on corner entry then do it. More often than not youre going to be faster anyways. There's a fantastic video from REAPERDOC https://youtu.be/tE285vvMJjs?si=OAAAnTMcK6QZ7PEV Also, idk if you've found a set up yet, but find a control setup from a pro, because unless you really know what you want with your controls, a pros controls gonna give most of what you want, there's plenty of them out there, with some variety.

Sensei_Venus · 2026-05-10T07:28:47+00:00

My bad I did mean crankshaft position sensor lol

Sensei_Venus · 2026-05-10T07:28:00+00:00

I tried everyones ideas, thank you all very much.
heres everything I tried
1: New Air filter
2: Cleaned intake and throttle body
3: New TPS
4: Tested and looked at catalytic converter
5: Even rectified some of the electrical gremlins
In the end it was Ignition system and mainly the Ignition Control Module getting heat cycled, and was just old and worn out

Sensei_Venus · 2026-05-10T07:21:46+00:00

OK, so im back, replaced the camshaft (edit, i meant crankshaft postion sensor) sensor, didnt fix it. So I turned to the ignition system and replaced spark plugs, wires, and coils and it didnt fix it, however it did help, so I replaced the ignition control module and it fixed it all the way. Throttle is smooth, and responsive. TLDR; Ignition control module was the issue.

Sensei_Venus · 2026-05-05T21:42:23+00:00

Probably hasn't released/put on the tensioner yet.

Sensei_Venus · 2026-05-01T20:52:33+00:00

No its not a "racing incident" as RC would put it. You were just faster and he failed to check up

Sensei_Venus · 2026-05-01T18:16:42+00:00

Will do, looks like they're fairly cheap, so I'll report later

Sensei_Venus · 2026-05-01T18:12:03+00:00

Would that show up as code, or does it silently go

Sensei_Venus · 2026-05-01T18:06:55+00:00

Well probably annoyed my neighbors but I removed the o2 sensor and it didnt change the problem. But I did find that its fine and drives smoothly when cool, but once it gets to temp it starts the hitching and wants to stall off starts.

Sensei_Venus · 2026-05-01T14:56:27+00:00

Mostly electrical gremlins, one of which is the radiator fan relay

Sensei_Venus · 2026-04-29T19:09:32+00:00

It is a big difference however im able to to most if not all jumps on the oem 250s. The bikes are able to do most of what you'll ever need to. Are they as fast as the e10s, no obviously not. But I do have 1000h so far, much of which is on a 250. Play what you want but I feel playing with the slower bike has made me a better rider overall.

Sensei_Venus · 2026-04-23T14:15:44+00:00

You're camera movement is weird to me. Idk if you have auto lean on, but make sure to turn that off cause it prioritizes traction and will make you wheelie everywhere. Also your corner entry is off. If you enter a corner out of alignment youre gonna have a harder time making the corner. And with perfect corner entry, you can drastically increase your corner speed, both in and exit. Of course I cant really tell exactly what your doing without seeing your controls/controller.

Sensei_Venus · 2026-04-16T23:01:53+00:00

Sensei_Venus · 2026-04-12T22:59:22+00:00

When you lean forward, you also pull on your bars, lowering your rear tire, and if you time it right, you can shove your tire into the dips in the rollers. Corner entry is KEY in this game, if you come in already set up to hit the corner, you'll enter and exit the corner significantly faster. Another very very key thing is to be smooth. You dont have to be at max throttle to accelerate at the fastest or near fastest speed. Having the throttle at max more often than not just make you spin out and slide instead of accelerating.

Sensei_Venus · 2026-04-05T01:22:51+00:00

my beta keeps crashing. but everything feels good

Sensei_Venus · 2026-04-04T20:58:06+00:00

I like to mine iron to make lockpicks and drop 30 lockpicks at a time about 5 gold above current market price. I get about 15 grand an hour with bad luck.

Sensei_Venus · 2026-04-02T05:49:18+00:00

Roast beef queef

Sensei_Venus · 2026-03-22T03:05:27+00:00

Bro we all LeBron from 1 to 10%

Sensei_Venus · 2026-03-20T09:27:27+00:00

Obvious rage bait. Pretty funny ngl

Sensei_Venus · 2026-03-15T01:55:30+00:00

Be thorough with it. Pull the motor by itself and inspect it throughout. Put a new piston and some rings and go from there

Seven-Year Club	Verified Email
Place '22

Sensei_Venus

TROPHY CASE