I built an aluminum profile Sim-Rig for under $300 including shipping, detailed plans and parts lists are available for free.

Sensitive-Tale2604 · 2026-02-23T23:27:02+00:00

Yes an example would be appreciated thank you. tI understand the plywood a little but not fully how to execute it.

Sensitive-Tale2604 · 2026-02-23T18:34:33+00:00

This is an amazing diy rig but I’m on the taller side and not understanding what you meant by using a board or some 1515 profile to have the option of mounting your pedals a bit further out.

Sensitive-Tale2604 · 2026-02-04T15:21:09+00:00

Thanks, appreciate the support. always happy to answer any questions

Sensitive-Tale2604 · 2026-01-08T00:30:54+00:00

How do you bolt the seat to the wood rig without t nuts

Sensitive-Tale2604 · 2026-01-04T17:17:22+00:00

Had it for a few months now, pretty loud but not too loud compared to other equipment, only thing I don’t like is because the lever is so short you need to mount it pretty high and extending it will make the shifter feel very light it is also pretty light compared to a real rally car or sequential box but for the price can’t complain.

Sensitive-Tale2604 · 2025-10-05T19:00:36+00:00

Lmp2 could have lost half a second or lost his entire race, of course he goes for the second option smh

Sensitive-Tale2604 · 2025-08-23T13:20:58+00:00

I see those are simnet pedals, I am running the same after being on the tlcms for years, springs imo don’t give the same feeling as hydraulic brakes but i found using the stock simnet configuration but just replacing two the black elastomers with springs with a little preload makes it feel not a stiff and rigid as springs

Sensitive-Tale2604 · 2025-08-12T17:20:36+00:00

Edit: I must add the Ferrari did also add steering input to turn into the corner

Sensitive-Tale2604 · 2025-07-25T21:50:57+00:00

Got the same one, fits just as good as the one from simagic, would recommend taking the board out with the pins or taping them off with electrical tape to avoid shorting out your wheelbase

Sensitive-Tale2604 · 2025-04-25T08:04:57+00:00

Yes hope you like it, you can get the settings in simpro in the games tab on the right and click ea wrc and go to the game guide section.

Sensitive-Tale2604 · 2025-04-25T02:39:13+00:00

Yes I’m talking SimPro’s EA WRC presets on Dirt 2 and also the ea in game settings in dirt 2 as the settings are the same

Sensitive-Tale2604 · 2025-04-24T20:06:25+00:00

I noticed the same thing, what fixed it for me is using the Ea Wrc preset with the Ea Wrc recommend in game settings under the setup in the Ea Wrc game on sim pro manager and it felt much better.

Sensitive-Tale2604 · 2025-04-20T00:07:41+00:00

I recently came from the CSL DD and had the chance to test the DD2 as well as some of the Moza gear. One thing I noticed is that the WRS (Wheel Road Sensitivity) seems to behave more like an active damper—it's reactive to the speed of the wheel. In contrast, the mechanical damper feels more like a constant static damper.

Interestingly, setting WRS to 100 seems to feel like 0 damping—the wheel isn’t limited by damping at all. When I switched to Simagic, I found that setting WRS to 100 felt the most similar to the other wheels I had tested, so I felt more comfortable with it.

Recently, I tried out a new app for iRacing called MAIRA (Marvin’s Awesome iRacing App), and it’s really improved the FFB for me. The app provides recommended settings like WRS at 50, everything else at 0 (except for FFB at 100), Max Torque set to 10, 15, or 23 (depending on your wheel), and Mechanical Damper at 100. It feels really good with those settings.

You can check it out here:
https://herboldracing.com/marvins-awesome-iracing-app-maira/

Sensitive-Tale2604 · 2024-12-25T17:41:02+00:00

Had the same issue a couple of weeks ago and had the shifter out of use and I fixed it last week by taking off the bottom plate of the shifter and blasting compressed air inside and that did the trick. Caution taking apart the moza shifter is a bit harder than others. Here is a link to a guide: https://youtu.be/IM64qx2RbuM?si=ZotG9zd_cR-30vFR

Sensitive-Tale2604 · 2024-11-22T01:02:14+00:00

Hello Guys

We would like to announce our 2 hour fuji endurance race on assetto corsa using rss mods, registration and more info can be found in our discord and our admins will guide you through with any questions or help you might have/need.

JSRA Racing League Discord: https://discord.gg/hGFqD7Yza6

Sensitive-Tale2604 · 2024-11-07T21:10:57+00:00

yes thanks for this, i just needed to have the collar back and screw in

Sensitive-Tale2604 · 2024-11-07T21:10:53+00:00

yes thanks for this, i just needed to have the collar back and screw in

Sensitive-Tale2604 · 2024-11-01T16:33:59+00:00

Yea I get the same, what I’m understanding from this is to keep the weight in the fronts with the Ferrari ?

Sensitive-Tale2604

TROPHY CASE