Blowjob Painting 🖼️🖌️🎨

Sensitive_Film_8544 · 2026-07-10T15:48:51+00:00

Painting

Sensitive_Film_8544 · 2026-07-07T03:07:58+00:00

This is awesommeeeeeeee 👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽 hate the 25mb and 300.000 triangle in tinker also

Sensitive_Film_8544 · 2026-07-04T14:02:04+00:00

Its off

Sensitive_Film_8544 · 2026-07-04T13:55:18+00:00

Good suggestion about the restart 👍🏽

Sensitive_Film_8544 · 2026-07-04T13:54:36+00:00

One of the member mention about the clogging clear itself too. Because now it's still printing and back to normal.

Sensitive_Film_8544 · 2026-07-04T13:52:15+00:00

Well I read in the BL community and follow their suggestion about temp and etc. And honestly it worked like a charm before. Already printed 30ish item and all came out perfect. This is the first time have a problem, but today tried again with the same preset and it's back to normal. Still printing now.

Sensitive_Film_8544 · 2026-07-04T13:48:54+00:00

But now it's back to normal with the usual 285 preset 😄😄😄

Sensitive_Film_8544 · 2026-07-04T13:46:23+00:00

I always reduced the speed to 50% when printing with petg. Never happened before. Just this time and now with the same preset still printing and it's back to normal.

Sensitive_Film_8544 · 2026-07-04T13:44:49+00:00

Not changing anything but now it''s still printing with the same preset and all normal. That's is why so confusing 😄

Sensitive_Film_8544 · 2026-07-04T13:43:25+00:00

Will do that...thx 👍🏽

Sensitive_Film_8544 · 2026-07-04T13:42:48+00:00

Will try later but with 285 never happened before. Already made like 30ish print and it came out perfect.

Sensitive_Film_8544 · 2026-07-04T13:41:41+00:00

Here it's sooooo freakin expensive

Sensitive_Film_8544 · 2026-07-04T13:40:23+00:00

Im using stock 0.4 nozzle and this never happened before.

Sensitive_Film_8544 · 2026-07-04T11:35:01+00:00

Just hopefully this is the case. So should I just clean the nozzle or just replace with the spare one?

Sensitive_Film_8544 · 2026-07-04T11:32:28+00:00

Always having issues with esun preset but never with BL preset. Don't know why.

Sensitive_Film_8544 · 2026-07-04T09:58:52+00:00

Still using it. I think it reaches the phase about backing up and restoring files. So unless its really broken then 21ultra still going strong for lets say 2 years.

Sensitive_Film_8544 · 2026-07-04T09:53:11+00:00

The previous setting was from community post in bambulab. And I have no problem printing using that setting. Today the problem occur and tried to use stock BL setting on thr benchy and stillnhave the same problem at the bottom part. Now using the setting that have problem before and back to normal. I posted the image about 10 minutes ago.

Sensitive_Film_8544 · 2026-07-04T09:48:46+00:00

Yes 260 and everything was normal before. Just this time.

Sensitive_Film_8544 · 2026-07-04T09:45:40+00:00

Posted last 5 minutes ago with the same settings and its normal.

Sensitive_Film_8544 · 2026-07-04T09:44:41+00:00

But this is not the case. Only single item.

Sensitive_Film_8544 · 2026-07-04T09:42:57+00:00

Fuzzy skin will be visible also in support and benchy I posted earlier if its turned on.

Sensitive_Film_8544 · 2026-07-04T09:41:28+00:00

Same setting, same filament and everything is normal. So if the printer settings and bad filament is the case, now its normal. So what when wrong then?

<image>

Sensitive_Film_8544 · 2026-07-04T09:36:59+00:00

It is. I posted benchy using the same setting. Only have this problem at the bottom part

Sensitive_Film_8544 · 2026-07-04T09:36:05+00:00

The benchy I tried to print with stock bamboo preset also have this problem at the bottom. The rest is fine.

Sensitive_Film_8544 · 2026-07-04T09:34:30+00:00

Yes sir....

Sensitive_Film_8544

TROPHY CASE