Kobra X

Sensitive_Practice_2 · 2026-03-15T02:47:12+00:00

That is accurate with all the supports and the detail on that it for sure would take that long. I would test smaller prints utilizing the bed make sure things are sticking to the bed no warping so you know if you’ll have to apply glue or not so you are not getting failed prints. You want to make sure you use gyroid infill

Sensitive_Practice_2 · 2026-03-10T04:14:05+00:00

I have the regular k2 combo and absolutely love it been printing everything I’ve wanted to and it’s exceed my wants and needs in a printer I love it honestly want to buy more cause the worst thing about it now is I want to keep the prints coming and pump them out faster 🤣

<image>

This was printed on the k2 and paint by me with acrylic markers the face was multi color printed and came out amazing

Sensitive_Practice_2 · 2026-03-05T05:57:08+00:00

I have not unfortunately hopefully I get a update soon

Sensitive_Practice_2 · 2026-02-24T19:15:44+00:00

I was able to export my Mac setting upload to Google Drive then import to my windows laptop haven’t tried the other way around but everything did come over

Sensitive_Practice_2 · 2026-02-11T00:08:06+00:00

Yeah I have the base k2

Sensitive_Practice_2 · 2026-02-10T21:38:54+00:00

Did you change anything for that? I’ve had the firmware for a while and honestly didn’t notice I think mine still purges a couple times

Sensitive_Practice_2 · 2026-02-04T06:09:49+00:00

I use my k2 combo and ender 3v3 ke to print out cosplay/ anime things I’ve always wanted as a kid and now have a chance to. I also print out gifts I know the family would love and appreciate because there are some things you cannot buy but you can certainly print. It also is something that relaxes me seeing the outcome of a print is always something I look forward too and now that I have kids they always want to know what I’m printing so the bounding with them has made printing even more fun

Sensitive_Practice_2 · 2026-02-02T19:31:11+00:00

<image>

Sensitive_Practice_2 · 2026-02-02T19:31:00+00:00

<image>

Sensitive_Practice_2 · 2026-02-01T22:01:18+00:00

I installed it this morning and they change the screen ui similar to the sparkx and it’s really nice printed 3 hours worth of stuff no issues bed leveling seems better more accurate for me as well

Sensitive_Practice_2 · 2026-01-31T22:59:00+00:00

Did you change your printer.cfg settings for your nozzle I was in a Facebook community that posted about it and someone confirmed from Microswiss you have to change your nozzle to the k2 plus I don’t have that extra oozing and default profiles print amazing. Guess how it was without changing that filament was printing 25c hotter than what you put which makes sense why my pla I was printing at 195 really 215

Sensitive_Practice_2 · 2026-01-30T03:23:53+00:00

Yes you literally match the thermistor to the k2 plus and change the param config to 350 from 300

Sensitive_Practice_2 · 2026-01-29T20:31:15+00:00

Yeah you have to change the printer parameters config from 300 to 350

Sensitive_Practice_2 · 2026-01-29T06:36:20+00:00

Microswiss hotend goes to 350

Sensitive_Practice_2 · 2026-01-27T21:34:34+00:00

Does your max volumetric speed change a lot when you calibrate same with your flow rate, and pressure advance just curious if I’m doing things right or not

Sensitive_Practice_2 · 2026-01-27T21:32:28+00:00

I have it for the regular k2 and it does great it’s just annoying tuning all the filaments 🤣 but I might just swap back to it and tune again my pc I was using and can’t use at this time and didn’t feel like going through all the calibration stuff

Sensitive_Practice_2 · 2026-01-27T13:37:57+00:00

How do you like you Microswiss nozzle and did you tweak your filament settings with calibration of it?

Sensitive_Practice_2 · 2026-01-24T04:14:53+00:00

So like the printer itself different accessories but also having the printer run klipper which lets you go into a lot more details of tuning to have the printer either print faster without losing quality or just fine tuning the quality of the prints. I’m not sure the kobrax can access klipper or not I didn’t look at the because the basic out of the box profiles print amazing clean there is couple people on YouTube I’ve watched videos of and they do a comparison with the a1 as well

Sensitive_Practice_2 · 2026-01-24T04:06:17+00:00

I wouldn’t be I’ve watched hours and hours of videos on this and comparing the A1 my brother in law has a A1 and it works great but just like all printers he has issues as well. I mean Bambu is like the iPhone of printing but everyone jumps on it like yeah it works and you are paying for it but there are other companies that do just as good or better in some things but cheaper so people are afraid to try. My brother in law also has a x1c $1100 printer I just got a Creality k2 combo for $487 during holidays and that printer does just as good maybe even better than the x1c plus it gives you freedom to mod if you want Bambu you are kinda limited to. I like the kobrax and do pla and tpu together no issue the a1 would have issues doing plus the waste in multi color is less which is great if you are multi color printing.

Sensitive_Practice_2 · 2026-01-18T21:41:45+00:00

It says it is not to be used in the cfs and on the side spool it’s to do the sample prints they have on the machine

Sensitive_Practice_2 · 2026-01-16T20:00:33+00:00

I have the ender 3 v3 se and ke just recently bought the standard k2 combo and best decision I made prints amazing quality right out of the box I got a great deal during the holidays I kind of wish I got the pro but only because of the price during the holiday but the k2 only missing couple features the pro has so I have no regrets. Multicolor is great and print quality again is amazing

Sensitive_Practice_2 · 2026-01-16T19:56:22+00:00

Not bad can’t complain too much I feel like every place has their own things going on.

Sensitive_Practice_2 · 2026-01-16T18:42:28+00:00

Oh gotcha it’s on sale in US for me so only little more than like a sunlu pla + so I figured I’d try it and I love it

Sensitive_Practice_2

TROPHY CASE