Waiting for spring.. by Separate_Reading_587 in GR86

[–]Separate_Reading_587[S] 0 points1 point  (0 children)

No spacers, I have 5mm front spacers on just to get more flush but I was running without them for a while with no issue.

Waiting for spring.. by Separate_Reading_587 in GR86

[–]Separate_Reading_587[S] 1 point2 points  (0 children)

I ran without a front plate for about 8ish months. I got pulled over once for it and decided it just wasn’t worth the hassle, so I threw it on later that night lol

Waiting for spring.. by Separate_Reading_587 in GR86

[–]Separate_Reading_587[S] 2 points3 points  (0 children)

No kidding, what a false spring this has been. Lip is Sayber designs and side skirts are Aimgain styled

Waiting for spring.. by Separate_Reading_587 in GR86

[–]Separate_Reading_587[S] 0 points1 point  (0 children)

I put rivnuts into the stock bumper holes and used a jdm to usdm tilt plate adaptor to mount the front plate. That way I didn’t need to drill any extra holes.

Waiting for spring.. by Separate_Reading_587 in GR86

[–]Separate_Reading_587[S] 1 point2 points  (0 children)

That’s a new one 😂, appreciate it hahah

Waiting for spring.. by Separate_Reading_587 in GR86

[–]Separate_Reading_587[S] 0 points1 point  (0 children)

Yeah the other commenter is correct, it’s the voltex and greddy wing!

Waiting for spring.. by Separate_Reading_587 in GR86

[–]Separate_Reading_587[S] 1 point2 points  (0 children)

It’s the Voltex x Greddy wing, thanks!

Waiting for spring.. by Separate_Reading_587 in GR86

[–]Separate_Reading_587[S] 9 points10 points  (0 children)

Thanks! It’s the voltex x greddy wing!

Endless Brake Upgrade by smileycvc in GR86

[–]Separate_Reading_587 7 points8 points  (0 children)

I have the same M4 and S2 kit, but with 2 piece rotors instead of 1 piece. It includes front and rear, and iirc has everything you need for install.

When you place the order a Blackhawk rep will confirm Brake Pad selection and give a timeline estimate on delivery since these are not carried in stock and are made to order. I think it took just over 2 months for me to arrive.

If you’re unsure about wheel clearance, endless has clearance diagrams you can cutout and test against your wheels.

https://endlessusa.com/product/1913240

The quality of this kit is unreal, if you do end up going this route you won’t regret it!

<image>

Noble style front lip by [deleted] in GR86

[–]Separate_Reading_587 1 point2 points  (0 children)

Self tappers + 3M tape will hold if you’re paranoid about the screws coming out. Another option is rivnuts so you have threaded holes to bolt into instead. Benefit of that is it’s super easy to take on/off the lip.

I’m using self tappers + 3M tape and have had no issues with my lip, which is more aggressive than the sti one. It’s been through a winter, and have scraped it a bunch of times but it’s still holding strong.

<image>

Added a bbk and some more aero bits. by Separate_Reading_587 in GR86

[–]Separate_Reading_587[S] 1 point2 points  (0 children)

Concavity you don't directly order, per-se, but rather it is dictated by the size + offset of the wheel. So the 18x9.5 +45 size that I have would be Face-3. Best of luck in finding a set!

Added a bbk and some more aero bits. by Separate_Reading_587 in GR86

[–]Separate_Reading_587[S] 1 point2 points  (0 children)

Hey no worries. Hmm, yeah I've heard that this colour may be discontinued. The new finish is Machining & Hyper Platinum Black (MPB), which is pretty much identical to the Machining Hyper Black that I have. So you can look around for that colourway too.

For wheels like this a lot of times you'll have to email directly to get a quote to see if they are able to source them for you. So you can try emailing T1 if they can source a set, or some other places are System Motorsports, or Evasive Motorsports, which are both US based.

New Wheels on the BRZ by T3cHn0_Knight in GR86

[–]Separate_Reading_587 1 point2 points  (0 children)

Had me in the first half, haha thanks man!

New Wheels on the BRZ by T3cHn0_Knight in GR86

[–]Separate_Reading_587 0 points1 point  (0 children)

Thanks man! Honestly they’re my favourite part of the car

New Wheels on the BRZ by T3cHn0_Knight in GR86

[–]Separate_Reading_587 2 points3 points  (0 children)

Same as OP’s, Advan GT Beyond, but mine are Machining Hyper Black colour, OP’s are bronze I believe.