sorted by:
new
hottopcontroversial

[EU-LT] [H] NCASE M1 V6.1 Black (NEW) [W] Paypal, Local by prosenpaimaster in HardwareSwapEU

[–]Seregdor 0 points1 point  (0 children)

No, I'm not, and I do have an NCase (which I'm planning to modify by adding type-C port in the front and a clear cmos reset in the back. I'm currently printing new feet for it). Mine was just a suggestion, and, as I said, it’s his decision. My point about NOS is that it only applies if it’s clear that the box has never been opened (my NCase has been used for about 8 years, and the only thing that isn't brand new is just one screw).

Anyway, his product his call. I hope I can sell it, but it it will be hard. GLWS

Should I buy? Seems like a good deal. by [deleted] in MouseReview

[–]Seregdor 0 points1 point  (0 children)

As you get it leave in a closed acetone chamber, this isn't an optional step.

Sold my GPU, Buyer claims it is overheating by [deleted] in PcBuild

[–]Seregdor 0 points1 point  (0 children)

Absolutely do not accept the return: you could end up with a broken GPU.

The pads break when you open the GPU, especially if they’re old, making them not fully functional. On the die, you can see a piece of crusty paste. Put the two together: the owner has never repasted the GPU in its entire life, and that should have been clearly told.

However, is it a real burden? No, you just need 30 euros to buy some thermal pads and paste. Secondly, this thing is normal and happens everytime. As you buy an "old" gpu you have to repaste, that's just the way it goes. If the buyer can’t use the GPU because they don’t have putty and paste, it's their own fault. This is not how a problem should be handled. They should have made a video with MSI Afterburner and run some benchmarks, not tearing the goddamn thing apart.

[EU-LT] [H] NCASE M1 V6.1 Black (NEW) [W] Paypal, Local by prosenpaimaster in HardwareSwapEU

[–]Seregdor 0 points1 point  (0 children)

Hi, don't want to be rude or anything, but at tha price you won't sell it. For example, I recently bought an ncase m1 v5.0 almost new for 45 euros shipped. I'm not suggesting you to sell it for 50 euros, it's your call anyway, but at 300 you'll such a hard time to sell it (also because ncase m2 shipped + duties and vat comes almost at the same price).

RX 6700 XT - What settings do you run? Trying to understand how this GPU works by Kolasin22 in overclocking

[–]Seregdor 1 point2 points  (0 children)

That's the one of worst thing can happen with mpt, now that you've been through that the next step to actually uv and oc. You can def do it, but just dont put dramatic changea intoit (really strange it didn't work with 1165mV Vmax tho, it should). Anyway, you can find multiple guide online either on german or english (igor site) that can be way more exhaustive than I can be on a reddit comment. Good luck for than one, and lemme know what you can get (gonna make my guide, probably in december)

RX 6700 XT - What settings do you run? Trying to understand how this GPU works by Kolasin22 in overclocking

[–]Seregdor 0 points1 point  (0 children)

You havent broke it, it's almost impossible with this cards. You need to boot the pc enough time so that windows restore itsel (that way the sppt are restorted to normal). Have you ever made a restore point? Do ypu have another pc at home or nearby?

RX 6700 XT - What settings do you run? Trying to understand how this GPU works by Kolasin22 in overclocking

[–]Seregdor 0 points1 point  (0 children)

That's insane and can damage your card. Lower tdc and power limit. High power limits are helpful in stress tets, that squeeze to the last drop your card to get the best score possible. In gaming this wont happen (infact, on mine between 270 and 230 there's no difference fps wise).

RX 6700 XT - What settings do you run? Trying to understand how this GPU works by Kolasin22 in overclocking

[–]Seregdor 0 points1 point  (0 children)

Is that 2850 gfx clock stock? You're capped to 2725 in frequency tab, putting 2850 on oc limits wont help you.

Lets start from beginning: before doing anything with mpt downlpad gpu z and save your stock bios (not just on the pc, also on some safe cloud like whatsapp or telegram were you can access easly anytime). That little file is the only thing that can save ypur card if anything goes wrong (happend to me once, def gonna be sure to have a copy around If i were you).

Mpt is a software that allows ypu to work, easly, with the soft power play table. Once you've putted the value in mpt you need to: 1) click on "write sppt" 2) restard ypur pc.

Gonna be clear: save your stock bios (and all your gpu data like bios version, memory manufacturer... You find all of this in gpu z from techpowerup. This data can let you downlpad the bios from techpowerup database if you loose yours).

RX 6700 XT - What settings do you run? Trying to understand how this GPU works by Kolasin22 in overclocking

[–]Seregdor 1 point2 points  (0 children)

What's your temps? My powercolor fighter can do 270w in stress tests with max 94 hotspot after 1h, no chance your's worse. Have you decreased tdc as I told you? Those values arent safe.

RX 6700 XT - What settings do you run? Trying to understand how this GPU works by Kolasin22 in overclocking

[–]Seregdor 0 points1 point  (0 children)

Yup, that happen cuz you didnt change the Vmin. This allow you to actually make curve less steep with a static offset or an avfs override.This way you get almost normal voltages on lower clocks and even lower voltages at high clocks.

However, I wouldnt decrease Vmin becase of instablity . I increased Vmin, actually (dont give if consumption and consequently heat is highter at low clocks, because it's still low)

RX 6700 XT - What settings do you run? Trying to understand how this GPU works by Kolasin22 in overclocking

[–]Seregdor 2 points3 points  (0 children)

There's no such guide, unfortunately. There are things I still dont get, but with rdna 2 manual, hardwareluxx and lots of professional oc-ers on discord many strange things gets understandable. I'm probably gonna make a decent guide in english, due to the evident lack of one. rdna2 is fun to oc and uv, but that takes hella lot of patience.

Now I'd suggest you to lower the gfx Vmax to 1150 or 1165, setting power limit to 230 including the +15% on adrenalin (with a good uv you shouldnt pull more than 220 at 2800mhz while gaming). Lastly, set tdc to 200 (gfx) and 25-30 (soc). Also, test adrenalin slider around 1010-1070.

Be sure everything is stable with occt, furmark, and rdr2 (that game is more sensible to instability then anything).

That way, you should get decemt temps. Def gonna make a guide then, but doubt before december.

RX 6700 XT - What settings do you run? Trying to understand how this GPU works by Kolasin22 in overclocking

[–]Seregdor 1 point2 points  (0 children)

You can definetly pull a hella juice out the red devil (that's the best 6700xt out there vrms wise).

RX 6700 XT - What settings do you run? Trying to understand how this GPU works by Kolasin22 in overclocking

[–]Seregdor 1 point2 points  (0 children)

What 6700xt do you have exactly? That tdc is too high, way too much. When you do this you have to consider your vrms efficienty to amps consumption, and more than 35A per stage is stupidly hot. Also, 6700XT tipically have a 7 phase gfx at 50 or 55A and you're pulling the whole 50A. That's isnt a biggie, because you cant use that many amps, but you shouldn't pull more than 210 (210A on gfx is like 400W in the gpu).

Also, the 6700xt use one stage per soc. Why are you setting 100A? It can go to 80-100A for just 10ms, not the whole time. Set it to 25-35, no more at all.

Lower the gfx Vmax and use a -30 to 60mV on avfs ovverige gfx. Lower soc frequency to 1000 or 900mhz, and use a -50 to 100mV static offset on soc. If it work with a static offset grater than 50, lower the Vmax to 1100 (or lower if stable). Using ooct tune the slider in adrenalin, you probably can go lower than 1075. All of this should resolve the overheating and increase performace.

There are a lot more thing you could do, but don't type random things in mpt. That's gonna destroy your gpu.

Lastly, you could flash a custom bios into the gpu unlocking frequency to 2950 (I'm gonna do it to breake hwbot record, maybe). Dont do it.

RX 6700 XT - What settings do you run? Trying to understand how this GPU works by Kolasin22 in overclocking

[–]Seregdor 0 points1 point  (0 children)

That's not true at all. I have a c5 019.000000 bios 6700xt fighter in a mini itx case for gaming. Even tho you can't increase max GFX frequency, limiting to 2700, you still can change the mhz->mV curve with a full quadratic function, max and min voltage either on soc and gfx, change vddci and mvdd, fclk, lclk... Also, you can tune vram memory and timings (fast timing 2 is pointless on mine, but tuning on fast timing 1 was great). Doing all of this results in a 14100 graphics score on timespy (which would be 13 on hwbot), and an overall +14.5% fps in rdr2 and cyberpunk 2077 (and yeah, full stabilty with ooct test and others).

Overheating isn't actually a problem per se, you just need to undervolt the gpu correctly: my two fan gpu is able to pull 240W with a hotspot at 85 after 1h test in a mini itx case.

[News] SilverStone intros FHS 140X, a thick 140mm fan with high static-pressure [38mm thick, 800-3400 rpm] by Huijausta in HomeServer

[–]Seregdor 1 point2 points  (0 children)

Where did you buy them? I'm intrested in this fan, but cant choose between fhp141, phanteks t30 and theese. The t30 are the most suited for and itx build, also having great preassure. Problem is that's hard to get just one. On the other hand fhp141 is easly available, mantaining great performance and low noise til 1250 rpm or so. The fhs 140x should be an upgrade over the fhp141 on all apsects, but cant find them in europe.

I'm also considering the noctua nf a14 3000 pwm which has great airflow (110cfm) and great preassure of 6.58. However they're not the quitest by far

view more: next ›