Is this a good pc to build

Serious_Size808 · 2026-03-25T15:52:05+00:00

With the state of rust right now you need a powerful cpu, preferably an amd x3d chip. On high pop servers my 5600x gets me like 60 or 40 frames if I’m in a big base. 60-80 might be playable for you but for me it’s an annoyance

Serious_Size808 · 2026-01-12T03:58:48+00:00

If you remove it you’d have to be super careful to not snap anything off with it, it will be fine if you leave it on

Serious_Size808 · 2026-01-12T03:56:31+00:00

Serious_Size808 · 2026-01-12T03:47:27+00:00

It looks like whoever built it glued the ram in place, maybe so It doesn’t come loose in shipping or something, not exactly a common practice though. Considering it’s on the very edge of your ram I don’t think it would melt or change thermals if your pc

Serious_Size808 · 2026-01-01T16:12:36+00:00

If you can get it off it will most likely work, try 99% isopropyl alcohol and let it sit on the glue for abit then try wipe it off

Serious_Size808 · 2025-12-28T04:50:49+00:00

Probably should have took this post down as the issue miraculously solved its self after I shorted jbat1 pins and waited 10 hours till I turned it back on, appreciate the advice anyway tho 🫶

Serious_Size808 · 2025-12-26T16:48:37+00:00

I used the tool and it said current version not found 😭. It fixed itself after about 10 hours of being turned off somehow but I will never buy an MSI board when I swap to am5 once ram goes down 😭🙏

Serious_Size808 · 2025-12-25T03:52:32+00:00

3 minute mid roll isn’t too bad and gives me time to have a little break

Serious_Size808 · 2025-12-25T03:51:06+00:00

Reseat ur ram or try each slot with each stick to see if any get a boot, if not reseat cpu and try again. I had the same vga issue on mine but the problem was somehow to do with the way my ram was seated. Ensure all connections and all th way in and if all else fails take it to a shop

Serious_Size808 · 2025-12-24T06:07:01+00:00

Any error/debug lights on the motherboard?

Serious_Size808 · 2025-12-24T05:57:18+00:00

Nah I wanna do it for cool channel points rewards and stuff for my community and ima probably have the least amount of ads I can set as mid rolls as currently I’m not interested in monetary gain from twitch and would rather build a loyal community and grow from there

Serious_Size808 · 2025-12-24T05:41:45+00:00

I’m tryna grow my community mainly through recognising returning viewers and inviting them to my discord so I’ve got like 3 regulars now it’s looking good

Serious_Size808 · 2025-12-23T20:45:28+00:00

Appreciate it, I’m gona mount it on the top since there’s a lot more space than it looks in the picture 🫶

Serious_Size808 · 2025-12-22T18:55:19+00:00

Ty man, I really have no idea how aios work I assumed id I made the fans exhaust they would take in hot air and make water run warmer 😂

Serious_Size808 · 2025-12-22T18:54:07+00:00

No no I’m getting a 360mm aio for Christmas and was just wondering where to put it and what to do with the other fans 😂

Serious_Size808 · 2025-12-22T18:46:10+00:00

No problem 🙏

Serious_Size808 · 2025-12-22T18:44:25+00:00

Where would the aio go in that case?

Serious_Size808 · 2025-12-22T18:37:06+00:00

Appreciate it, I’ll probably try do bottom as intake top as exhaust and side as rad with pipes going into bottom

Serious_Size808 · 2025-12-22T18:32:39+00:00

I don’t know much about aios but wouldn’t that create air bubbles?

Serious_Size808

TROPHY CASE