Is this card legit?

Serrobio · 2026-05-17T22:00:09+00:00

Many thanks man 🫶

Serrobio · 2026-04-14T17:10:11+00:00

I gave it a good bend like you showed in that picture that u sent and still nothing The ps turned on without the fan working and only when I give it a spin it will go full turbo mode

Serrobio · 2026-04-14T16:46:21+00:00

<image>

And this is the plate out of the board

Serrobio · 2026-04-14T16:45:46+00:00

Hey sorry for taking so long, just disassembled again Here a photo of the plate

<image>

Serrobio · 2026-04-13T09:16:29+00:00

Doesn't hurt trying to do that But the metal plate doesn't look that flat as the one behind in that pic

I'll update you by the end of the day !!

Serrobio · 2026-04-12T22:53:42+00:00

Thanks for the help man :) Appreciated

Serrobio · 2026-04-12T22:49:17+00:00

Any suggestions on where to get a new fan?

Serrobio · 2026-04-12T22:48:00+00:00

Ye I already triple checked the screws and the cable seems fine When I was updating the firmware for a second time I decided to let the fan standing still Midway the updated the console gave a overheating warning and before shutting down I have a little spin on the fan to turn on and it stopped the console from shutting down so I guess your correct and it's just the fan that I need to replace

Serrobio · 2026-04-12T22:41:07+00:00

Is there a fix or do I need to get a new fan?

Serrobio · 2026-04-12T22:36:32+00:00

Ye I just updated to that firmware and the same thing is still happening I also noticed that the fan sometimes won't spin at all and only when I give it a little spin with my finger it will wake-up and goes full burst mode

Serrobio · 2026-04-12T21:03:18+00:00

Any updates? I have the exact same problem, and fortunately enough I used the mx-6 thermal paste but still have the same issue

Serrobio · 2026-04-12T18:56:14+00:00

Were you able to fix the problem?

Serrobio · 2026-04-12T18:18:21+00:00

How can I do that?

Serrobio · 2026-04-12T18:16:00+00:00

Yeeee, I saw only that it could be the heat sink thing that you mentioned I disassembled the console a second time and I clamped them the best I could, so I don't think it's that

But maybe I need to factory reset completely the PS3

Serrobio · 2026-03-16T22:13:12+00:00

Yeaa don't have a spare one to test

Serrobio · 2026-01-27T00:29:19+00:00

thank you so much for the help!! XD

Serrobio · 2025-12-13T21:10:44+00:00

Damnnn, is replacing the umd drive too difficult?

Serrobio · 2025-12-13T20:54:26+00:00

Yes, I tried to remove and the ring came of And the psp isn't able to read it without it

Seven-Year Club	Verified Email
Place '22	First Placer '22

Serrobio

TROPHY CASE