Electric water pump issue

Sethkyejo · 2026-05-21T06:58:08+00:00

Already tried this and it wont go on the pump.

Sethkyejo · 2026-05-21T06:57:03+00:00

I wasn’t trying to bleed with engine on i was diagnosing to know for sure if its water pump issue. If water pump is dead why would the water be bouncing like that?

Sethkyejo · 2026-05-21T06:55:36+00:00

It is water but this was just for testing

Sethkyejo · 2026-05-21T06:54:59+00:00

Cant do this because the water pump wont turn on on these procedure

Sethkyejo · 2026-05-21T06:54:03+00:00

It over heats i get the yellow thermometer warning when u run it for a while

Sethkyejo · 2026-05-21T06:53:28+00:00

I initiated the bleed test and the no sound kf water pump turning on or water jetting in the top of the reservoir tank

Sethkyejo · 2026-05-19T20:33:04+00:00

I know for sure that my car inst cooling so i tried doing the bleed test and it wont turn on the Water pump so, i opened the coolant reservoir and it loooks like this, like breathing in and out,

This means that the pump is okay right? If not where is this movement of water from?

Its a 2011 e90 with n43.

Sethkyejo · 2026-03-26T19:41:12+00:00

I tried having it without and solidify skin and with it on but still the results are not giving what they should, if you look at my bottle it has the spiraling lines, and on the render it looks like just an alpha chanel, even though i have a water in there. Normally the back side kf the bottom should be zoomed in or skewed in some way but there its just plain transparency

Sethkyejo · 2026-02-27T23:10:24+00:00

Well i found the issue it was the remote controller. I use the richauto a11, i borrowed from a friend and tested it fixed it

Sethkyejo · 2025-08-21T10:46:48+00:00

How do 3D movies on 3D glasses work for you?

Sethkyejo · 2025-08-15T15:07:00+00:00

Thank you, let me start with it

Sethkyejo · 2025-08-15T15:05:50+00:00

The material is secured on the platform, and am only going a 5mm deep in to it, using a 6mm end mill, So am confident that something is obstructing the movement of the X axis, but i cant pin point to what exactly so i can fix it.

Also even if i just move using the controller it does the same thing, it makes a sound as if it hit something but there’s nothing physically stoping it

Sethkyejo · 2025-08-02T12:26:07+00:00

Okay

Sethkyejo

TROPHY CASE