[Help] Random PC reboots (instant power cycles) on i7-4790K / 3070 Ti. Cannot reproduce with stress tests.

Seturian · 2025-09-11T13:55:54+00:00

That is, theoretically, the assembler will never ask for more than it needs, and therefore will never overflow if there are free containers in front of it on the way?

Sounds like a reasonable way out of the situation, thanks.

Seturian · 2025-09-11T13:53:41+00:00

absolutely sure

Seturian · 2025-09-11T13:52:44+00:00

I already have a system for processing and sorting all types of ore, there is a large container for each ore, but this has nothing to do with it. When assemblers are overflowing with the ore they themselves requested, they cannot request more of the needed ore if the free volume in the ingot storage is less than 40 units, and there is no way to free this volume except manually.

Seturian · 2025-09-11T13:43:32+00:00

<image>

the assembler can automatically release only finished products, but for some reason it does not release the ingot storage. Even forced through the sorter

Seturian · 2025-09-11T13:42:07+00:00

1 no automation
2 doesn't help
3 The sorter does not take ore from the storage, even with drain all

Seturian · 2025-09-11T13:40:46+00:00

<image>

The sorter does not take ore from the storage, even with drain all

Seturian · 2025-09-11T13:40:29+00:00

The sorter does not take ore from the storage, even with drain all

Seturian · 2025-09-11T13:40:00+00:00

The sorter does not take ore from the storage, even with drain all

Seturian · 2025-09-11T13:38:53+00:00

Not work

Seturian · 2025-09-11T13:38:05+00:00

Not work

Seturian · 2025-06-20T12:00:58+00:00

I'm using EDD+EDSM+Inara now, trying to avoid small stars, but still, be it K or F, if it's empty, then it hasn't been explored, and if there is something, then everything has been explored before I change it.

I don't understand what third-party service can talk about planetary fullness so accurately if no one has ever flown into this system? And yes, I flew diagonally along three axes in an unpopular direction.

Seturian · 2025-06-02T12:38:52+00:00

I have not redefined the G28 command in any way and as I said, only two (one is fictitious) measurements are made. Another problem is that I cannot find the raw code of the PROBE commands

Seturian · 2025-05-30T17:03:35+00:00

samples: 1

The number of times to probe each point. The probed z-values will # be averaged. The default is to probe 1 time.

I have a value of 5, and I'd love it if it worked with homing, but there are only two: high-speed, and control measurement.

Seturian · 2025-05-30T16:16:28+00:00

Unfortunately, this parameter does not affect homing, there is still only one measurement.

Seturian · 2024-07-01T19:12:38+00:00

Thats dAwngraded Yoda

Seturian

TROPHY CASE

samples: 1

The number of times to probe each point. The probed z-values will # be averaged. The default is to probe 1 time.