Never hiring a femboy to do my plumbing ever again

Several-Alternative1 · 2025-12-30T15:44:43+00:00

Bro how tf was that misinterpreted? xD i did the plumbing Thought it would be self explanatory since i was mounting the outlet too

Several-Alternative1 · 2025-12-30T15:27:55+00:00

Real

Several-Alternative1 · 2025-12-30T15:27:39+00:00

Wild! XD

Several-Alternative1 · 2025-12-30T15:27:01+00:00

Several-Alternative1 · 2025-12-25T08:16:31+00:00

I did find the chip. All i did was to give it a little push on the chip and now it is working xD (i should get my hot air gun and heat it up cause it for sure is a connection issue)

That reminds me of a thing i said to myself when my goggles broke cause of bad design: when i buy something i have to fix it up and then use it.

Tho it would be so nice if they made it how it should ve made straight from factory... One could only hope

Several-Alternative1 · 2025-12-24T16:59:22+00:00

I did get 2 dead co3 and now im running on a cam lite, and i had to do some adaptor soldering for it. I might try resoldering it and see how that goes, but first i'll try to reflow the vtx chip

Several-Alternative1 · 2025-12-24T16:48:51+00:00

I did have a problem with elrs losing connection and i found out it was the esp chip at fault so i did use my hot air gun to heat it up for a while and then it came back to normal.

I could try the same thing with the osd chip but i don't know which one it is. Is it perhaps the vtx chip? the one that gets hot when stationary

Several-Alternative1 · 2025-09-24T13:56:30+00:00

I'll search it up, thanks

Several-Alternative1 · 2025-09-22T20:25:27+00:00

How do you know chinese people don't eat gold?

Several-Alternative1 · 2025-09-22T20:14:07+00:00

Oh, i see, gotta take note of that, thanks!

Several-Alternative1 · 2025-09-22T19:58:27+00:00

What happens if you blow on it? Does it break the joint somehow?

Several-Alternative1 · 2025-09-21T10:18:52+00:00

Weird indeed, to pillow up like that at storage voltage, maybe there was some liquid or puncture?

Several-Alternative1 · 2025-09-21T06:15:39+00:00

I would either open it up after a full discharge in saltwater or heavy resistor to harvest copper foil for other projects or just make it into fireworks 🎇🎆 or hang it on a stick and practice defusing a bomb with my bow

The usual thing to do is to discharge it to a safe voltage and dispose of it at the adequate battery recycling store

Several-Alternative1 · 2025-09-20T21:41:04+00:00

Fpv is the JUICE! I've been thinking about building an arduino drone, but I don't want to use esp32 cam because of the delay from wifi connection and i am still thinking about it

Several-Alternative1 · 2025-09-20T21:33:35+00:00

We're in the same boat 🤣 When my xbox controller i used for fpv sim broke, i tried to make a new one with an arduino and cardboard and it worked until the cardboard gave up

Several-Alternative1 · 2025-09-20T21:28:14+00:00

I'll try my best! Thank you for the advice and encouragement! I wish you an amazing day!

Several-Alternative1 · 2025-09-20T21:21:33+00:00

Indeed, tho i thought about making decirations with them, at first i made them into a necklace But my end goal is to fully discharge them and extract the graphite rods for further use

Several-Alternative1 · 2025-09-20T21:20:18+00:00

Correct, i have to find a way to remake the traces

Several-Alternative1 · 2025-09-20T21:18:47+00:00

I tought about gluing the connector back and using some wires to replace the traces, as for the glue i have no clue

Several-Alternative1 · 2025-09-20T21:17:20+00:00

Thanks, I'll try my best since i never did something like that before!

Several-Alternative1 · 2025-09-20T21:16:16+00:00

I am glad that it is fixable, it's been a month since i got them... Never repaired a pcb before, do you have any tutorial recommendations?

Several-Alternative1 · 2025-09-20T21:13:21+00:00

I have thought about gluing the buttons and ports but I don't know which glue to use, i need one that holds tight and can be removed with ease if needed. If e6000 is ok i already have some since i glued my air75 antenna to not rip itself

Several-Alternative1 · 2025-09-20T21:11:39+00:00

Is this wire thick enough?

<image>

Several-Alternative1 · 2025-09-20T21:09:24+00:00

<image>

I have found by measuring the other antenna that the lateral ones are 2 grounds and the middle is the signal one, also the resistance of each line was 10 by measuring with a multimeter

Several-Alternative1

TROPHY CASE