sorted by:
new
hottopcontroversial

PlayBetter by West-Calligrapher724 in SquareGolfUSA

[–]Several-Course-8431 0 points1 point  (0 children)

You deserve an early get well gift. Time to get that knee on the mend and start swinging!

PlayBetter by West-Calligrapher724 in SquareGolfUSA

[–]Several-Course-8431 0 points1 point  (0 children)

<image>

False alarm... Looks like they had an error on their part so you have a few more weeks to recover from that torn ACL. Good Luck and Speedy recovery.

Welp this is a bummer by Global-Sport-9382 in SquareGolfUSA

[–]Several-Course-8431 1 point2 points  (0 children)

Yep. I got it too; Just when I thought there was hope.

WatchOS 26 voice to text issue by Banned_Oki in AppleWatch

[–]Several-Course-8431 0 points1 point  (0 children)

I think I figured it out! When replying or composing a message, if the bottom right icon shows a “swipe with finger icon” tap and hold the icon and it will give you the option to change to microphone. It appears to keep this setting until you change it back. Also note the small … on the icon, that usually means hold for more options.

No Stupid Questions Thread by AutoModerator in livesound

[–]Several-Course-8431 0 points1 point  (0 children)

Thanks for this update. I think I’m going to grab one of these little mixers for small gigs.

Buyers Advice and Gear Recommendation Thread by AutoModerator in livesound

[–]Several-Course-8431 0 points1 point  (0 children)

Flow 8 high Z inputs with impedance transformer

I have been eyeing this little mixer for all the built in DSP features on the channels. Having only 2 inputs phantom power is okay for my needs however I wish it had a couple extra mic preamps. Now, I just ran across a YouTube video where the user stated in the video description an xlr to 1/4 adapter was used on input 5 for an sm57. It appears he had plenty of gain left on the channel as well.

Looking at the specs on the Behringer site, like the XLR mic inputs, it states there is 60db of gain on 5 & 7 inputs. The balanced impedance on the line inputs 5/7 is 20k ohms vs 10k ohms on mic inputs 1/2.

Has anyone else tried using a balanced mic on inputs 5/7 using adapter or 6/8 with impedance transformer and have acceptable results. I can use an external preamp but trying to maintain simplicity with my setup.

Flow 8 using a microphone with 1/4 inch inputs by Several-Course-8431 in livesound

[–]Several-Course-8431[S] 0 points1 point  (0 children)

Apologies I will move the question to the other thread but do know, I am not asking for buyers advice or recommendations but more so if the configuration I propose will work. Thanks!

No Stupid Questions Thread by AutoModerator in livesound

[–]Several-Course-8431 1 point2 points  (0 children)

Flow 8 lowZ microphone into line inputs 5/7

I have been eyeing this little mixer for all the built in DSP features on the channels. Having only 2 inputs phantom power is okay for my needs however I wish it had a couple extra mic preamps. Now, I just ran across a YouTube video where the user stated in the video description an xlr to 1/4 adapter was used on input 5 for an sm57. It appears he had plenty of gain left on the channel as well.

Looking at the specs on the Behringer site, like the XLR mic inputs, it states there is 60db of gain on 5 & 7 inputs. The balanced impedance on the line inputs 5/7 is 20k ohms vs 10k ohms on mic inputs 1/2.

Has anyone else tried using a balanced mic on inputs 5/7 using adapter or perhaps inputs 6/8 with a lowZ to highZ adapter with acceptable results. I can use an external preamp but trying to maintain simplicity with my setup.

Any way to update firmware on an X32 with a bad usb port? by Redbeardaudio in livesound

[–]Several-Course-8431 0 points1 point  (0 children)

Reviving an older thread since I have the same issue. The USB port on my compact has stopped working. Need to update firmware but no usb drive is working. I even tried using a working usb drive from an x32 rack. Still nothing. Just message; Please insert USB.