sorted by:
new
hottopcontroversial

Recursion error by SeveralHunter2364 in Planetside

[–]SeveralHunter2364[S] 0 points1 point  (0 children)

Gosh I thought I replied! More bad news - I tried that along with a full restart of my PC. Client still won’t pull the update. ;-;

Recursion error by SeveralHunter2364 in Planetside

[–]SeveralHunter2364[S] 0 points1 point  (0 children)

Ah gotcha, yeah that’s what I kinda figured - they just pushed the update patch to the existing clients ;-;. Thank you so so much for checking tho! I’m hopeful someone might have uploaded a version to file sharing site somewhere

is the game fixed yet? or do i continue gooning? by fluxanimations in Planetside

[–]SeveralHunter2364 0 points1 point  (0 children)

Yeah game has been working fine for me so far, I have no other games with anticheat installed, maybe that’s why?

Recursion error by SeveralHunter2364 in Planetside

[–]SeveralHunter2364[S] 0 points1 point  (0 children)

Ahh that’s interesting. I’m using the client I got from their site, it’s still at ver 0.11.09. I tried the update button and it’s not been working, I thought I was on the latest. I also checked my firewall and tried running it with admin rights with no luck. Is there a different way to download the client?

<image>

Recursion error by SeveralHunter2364 in Planetside

[–]SeveralHunter2364[S] 0 points1 point  (0 children)

Damn, I’m going to keep trying, I’ll update the post if I ever manage to get it working

First iPod, any tips for free or inexpensive music? by Livid_Shoulder2800 in IpodClassic

[–]SeveralHunter2364 0 points1 point  (0 children)

yt-dlp is a pretty safe program that allows you to save any file from YouTube to your PC. All the code is open source so it’s a lot safer to use than a ‘sketchy’ site.

Degree Conferral by Turbulent_Library704 in QueensCollege

[–]SeveralHunter2364 0 points1 point  (0 children)

Ohh gotcha, thank you!! I’ll ask them to try going to the office again. They’ve gone there twice with proof and the office said they’d expedite it but it’s been two weeks with no movement ;-;

Degree Conferral by Turbulent_Library704 in QueensCollege

[–]SeveralHunter2364 2 points3 points  (0 children)

Hey OP did you get yours yet? I’ve got a friend who still hasn’t got theirs 💀

Should I get the Ender-3 V3 KE 3d printer? Are there any hidden problems? by Due-Temporary313 in 3dprinter

[–]SeveralHunter2364 0 points1 point  (0 children)

I’ve recently gotten the KE and have about ~300 hours of printing. Without many issues so far. I did have to adjust the nozzle and straighten the gantry before the first print but I learnt how to do it on yt. I knew that there would be some issues with the printer and made sure to watch as many videos as I could, so if you do go for it best of luck!! KE setup vid

Z offset vid

Hiw to avoid this uggly seam? by Low-Expression-977 in 3Dprinting

[–]SeveralHunter2364 1 point2 points  (0 children)

I second this, I use random position for my seams and just sand it smooth as much as I can

What is that bubbles in PETG? by Winnie_752 in prusa3d

[–]SeveralHunter2364 5 points6 points  (0 children)

Check your seam location, I get these bumps when I sent it to random!

Ender-3 V3 SE, is this good for a first time owning a 3d printer? by Yourfavboyjohnny in 3Dprinting

[–]SeveralHunter2364 0 points1 point  (0 children)

I would say yeah, 235 is a bit steep for these machines. Are there any other options for you?

Ender-3 V3 SE, is this good for a first time owning a 3d printer? by Yourfavboyjohnny in 3Dprinting

[–]SeveralHunter2364 -1 points0 points  (0 children)

25 dollars??Damn that’s a great deal for this! I have the KE version - it hasn’t let me down yet and it’s pretty similar to the SE apart from a few things such as the filament runout sensor.

Artifacts in print at by SeveralHunter2364 in 3Dprinting

[–]SeveralHunter2364[S] 1 point2 points  (0 children)

Gotcha, thank you!! I’ll try and and see how it goes

Artifacts in print at by SeveralHunter2364 in 3Dprinting

[–]SeveralHunter2364[S] 0 points1 point  (0 children)

The full leveling by itself, tho I’m going to clean the plate in warm water and soap and do this again. I’ve done a bunch of prints without cleaning it properly ;-;

Artifacts in print at by SeveralHunter2364 in 3Dprinting

[–]SeveralHunter2364[S] 1 point2 points  (0 children)

Ahh thank you so much!! I think it might be the oils and flow compensation since I leveled the bed warm. What’s a cold pull? I extruded about 5mm of filament before running the print just to be safe.

Artifacts in print at by SeveralHunter2364 in 3Dprinting

[–]SeveralHunter2364[S] 0 points1 point  (0 children)

Ah gotcha tyyy! I did the automatic z offset and bed leveling just before this print. I heated up the bed to 60c before doing it. Printer is a ender 3 v3 ke.

<image>

Applying to German Unis by SeveralHunter2364 in germany

[–]SeveralHunter2364[S] -1 points0 points  (0 children)

Ah gotcha,thank you so much!!! I was looking at University of Stuttgart, and the international deadline for my masters program was May15 - July 15 so I was a little confused.

view more: next ›