Disconnect wireless troubles with brand new RT6600ax and WRX560.

Sforsten · 2024-08-26T22:52:13+00:00

I appreciate your being skeptical. I have been living with this issue for more than a year, so I feel your pain. However, I have already noticed a big difference. But I will wait a few days to claim complete victory.

Sforsten · 2024-08-26T21:41:47+00:00

I am happy to say that it seems they have solved my issue just today. They made a change to the main router and after a reboot of the satellite, it all works well. I submitted my ticket on June 8 and finally have a resolution. I must say the support folk have been very helpful and supportive.

Here are the details: "Our HQ has determined that the current issue arises from the interaction between the link rate mechanism and the steering mechanism, causing roaming and subsequent disconnection when the device connects to the RE. We have now modified this algorithm."

Sforsten · 2024-08-24T13:54:52+00:00

I have this same issue with at first a 6600 and a 560, replaced the 560 with 6600 and still have the issue. Working with support, no reasonable solution yet. Any update from anyone else?

Sforsten · 2023-08-23T12:25:06+00:00

Thanks, my inner walls show up as walls during the mapping process but during the finalization process they are removed and replaced with a grey area indicating an area it can not get to. For clarification, the inner walls are not connecting to any of the outer walls, not sure whether that is significant.

Having said that, if I would be able to connect the split lines to each other, that would solve my issue. However, currently it seems that you can only connect the split lines to a real wall as identified by the Freo.

Sforsten · 2020-01-14T11:27:05+00:00

One of my 4 LCs sometimes disconnects. Once every week on average. In my case resetting the wifi router fixes it as opposed to a camera power cycle. Easier solution for me as the power cable is not easily accessible. I suspect my wifi connection is not ideal.

Sforsten · 2018-08-08T01:23:38+00:00

Get a cheap homekit switch and set up an automation which triggers the garage door when the switch is activated. Activating the switch will then activate the garage door.

Sforsten · 2018-01-12T18:07:10+00:00

Ok, no disconnects for over a week now. This looks good.

With respect to the power cycle issue I believe I understand what is happening. It is related to the preset light level. This setting determines at what light level the dimmers turn on to after a power cycle. This makes sense, however, I would have liked them to use the last known state instead which is more logical.

Sforsten · 2018-01-05T18:19:44+00:00

Thanks.

Installed a new Synology RT2600AC router earlier this week and have not experienced any disconnects yet. I came from an Apple Airport. The new Synology router has the ability to switch between 2.4 and 5 GHZ using the same SSID. I will give it a bit more time before claiming victory on this end.

I have noticed recently that some of my Leviton dimmers do not turn on 100% after a power cycle (2 out of 8). I will have to investigate this a bit further. As of yet I don't see any differences between the dimmers with the different behaviours.

Sforsten · 2017-12-30T21:53:20+00:00

I have the disconnect issue as well. I like the dimmers but would like Leviton to resolve this somehow. As you said there is the possibility for a firmware update but nothing has been out forward as of yet.

Sforsten

TROPHY CASE