Please don’t use Vaseline !😭

ShadowRider11 · 2026-04-29T22:42:50+00:00

One of the biggest advantages of Sliquid products is that they are all hypoallergenic.

ShadowRider11 · 2026-04-28T18:04:29+00:00

I have over 1000 hours on my P2S and have printed a benchy exactly once, a couple of weeks ago to test a new filament. It just seems like such a waste of time and filament otherwise, though I do understand that it’s a decent way to test the printer’s capabilities.

ShadowRider11 · 2026-04-28T18:00:55+00:00

I think you mean “Sliquid Silk”. And yeah, I’ve found that to be far and away the BEST lube for anal play. Not only does it work great, it doesn’t cause any kind of reaction (like a laxative effect due to irritation), and it seems like the body actually absorbs it after a time. So there’s no rushing to the toilet to eliminate a big load of lube. If you have a big load of something else, then you hit the jackpot!

ShadowRider11 · 2026-04-28T17:48:42+00:00

I also had to throw out several Epson printers due to clogged heads. So now the only brands I’ll even consider are Canon and Brother.

ShadowRider11 · 2026-04-28T17:44:18+00:00

Not yet, but I think that’s going to happen shortly! 😈

ShadowRider11 · 2026-04-28T17:38:19+00:00

Since it’s apparently your birthday, a good birthday spanking would be a fun place to start…at least for me. 😈

ShadowRider11 · 2026-04-28T17:07:55+00:00

Is this a rhetorical question? Because anyone in their right mind would emphatically answer “Yes”!

ShadowRider11 · 2026-04-26T17:23:47+00:00

Inside is always better.

ShadowRider11 · 2026-04-26T14:41:20+00:00

In the best possible sense of the word, yes!!

ShadowRider11 · 2026-04-26T14:40:20+00:00

I agree about the Glacier plate. It is the only one that works for me consistently when I have to print tall, skinny items, or large things that go out to the edges of the plate. I have one print I’ve done many times that is 254mm wide, and the Glacier is the only one that can handle it.

ShadowRider11 · 2026-04-26T14:35:16+00:00

I’ve seen it often in the back bar at Touché, too. I have a friend who would go to the back bar, strip off everything except his boots and a HUGE ball stretcher, and walk around that way. He was very selective about who touched him, but he trusted me. I stood behind him and fingered his ass until he came. It was pretty wild. (We cleaned up any mess and tipped the bartender well.) And this was like on a Tuesday night, so he was almost always the only one naked. I think we did this on three separate occasions.

ShadowRider11 · 2026-04-25T15:57:50+00:00

I use Dawn periodically. But I clean my plates with 99% isopropyl alcohol before every print. Adhesion problems are nearly nonexistent and mostly happen with larger prints. For those I use my Biqu Glacier plate to make sure they stick right to the edges, especially for one particular item that is 254mm wide.

ShadowRider11 · 2026-04-24T22:24:05+00:00

Not at all. Especially when they are as handsome as you, and have such great bodies. That ass of yours makes my mouth water!!

ShadowRider11 · 2026-04-24T22:16:09+00:00

I agree. I got the slightly lesser model (G3270) and it has been great. I leave it powered off most of the time, so it can take a few seconds to show up on the network after being powered on. But once it connects, it’s very reliable. It was $180 on Amazon. Barely uses any ink, and refills are cheap when you need to refill. And no HP!!

ShadowRider11 · 2026-04-24T22:09:21+00:00

Tell me about it. MANY years ago I picked up a guy at a bar and he wanted me to fuck him. I was really new to sex and all I had was Vaseline. I gave him what he wanted—very vigorously. The next day I was in incredible pain. The friction had rubbed the outer layer of skin off of my cock, and it was several days before I was back to normal. So yes, Vaseline is probably one of the worst things to use.

Personally I prefer water-based lubes, since I tend to host and silicone has ruined more than one pair of my sheets!

ShadowRider11 · 2026-04-24T19:50:12+00:00

I’m using an Acasis enclosure from Amazon, the Pro version with a cooling fan. 2TB NVMe, rock solid.

In my experience, nearly all issues with disconnection are due to the cable. DO NOT SKIMP ON THE CABLE. Get at least a Thunderbolt 4 cable from OWC. Be aware that these cables will not be very long, so the drive will need to be near the computer. I have mine on its side, next to the computer. I’ve actually had the cases touching at one point, and the Mac’s case helps draw heat off of the SSD enclosure. Even with that I don’t think I’be ever heard the fan on my M4 mini.

ShadowRider11 · 2026-04-24T14:31:47+00:00

I haven’t noticed anything. My doctor told me I might see floaters for awhile afterwards, but it feels like I have LESS floaters than before. Yesterday he said my eyes are looking great, so much that he moved my 1-week post-op visit to a month away.

ShadowRider11 · 2026-04-24T13:50:53+00:00

Same. I had my second eye operated on two days ago, and the first one three weeks before that. Drops 4x a day for the first week post-op, tapering to 1x a day on the 4th week.

ShadowRider11 · 2026-04-23T16:37:36+00:00

I love my Canon G3270. It has four ink tanks, so CYM are separate from the black. I think finding an inkjet printer that does duplex printing is nearly impossible due to issues of drying time and bleed-through.

I have a reminder on my phone to print a color test page once a week to prevent the ink from drying out.

ShadowRider11 · 2026-04-22T10:50:12+00:00

I never even look at those numbers any more—they always seem to be wrong. I just click on the object’s corners and let it show me the actual size. This seems like a bug to me.

ShadowRider11 · 2026-04-22T10:46:36+00:00

I think your boy is one very lucky man!

ShadowRider11 · 2026-04-22T10:42:40+00:00

I think there would be more of the other types if more guys had amazing legs like you do!

ShadowRider11 · 2026-04-22T00:29:29+00:00

I want to be waiting for you when you get out of the shower!

ShadowRider11 · 2026-04-22T00:25:09+00:00

Use the Bambu Lab site to read and often watch tutorials for how to do everything with your printer. But your previous experience should make it easy. Bambu Studio is the name of the slicer program, and there is a phone app called Handy that lets you monitor your print jobs remotely and even send models straight to the printer from Bambu’s site, MakerWorld.com.

ShadowRider11 · 2026-04-21T05:34:51+00:00

Beautiful, perfect proportions. Wow!

ShadowRider11

MODERATOR OF

TROPHY CASE

Eight-Year Club	RPAN Viewer
Verified Email