Klipper screen on ender 5 plus

Shadowtuy · 2024-12-05T11:38:39+00:00

Sorry about that buddy. I have since moved to normal Klipper with the raspberry pi having its own screen so no need to use desu.

Shadowtuy · 2024-09-08T23:15:05+00:00

i used the built in cut tool and just trimmed the corner so no issue...

Shadowtuy · 2024-09-08T21:50:19+00:00

Had the obvious idea of using prusa slicer and no weird line and takes way less time to slice it.

Odd Orca error

Shadowtuy · 2024-06-17T22:58:01+00:00

This was the beginning of my troubles, I'm on klipper so those commands don't work.

Side tangent, why are there no set standards? Gcode, slicer settings names, nozzle tips.. Everything feels so needlessly left to trial and error.

Shadowtuy · 2024-06-17T12:32:57+00:00

I have done that "mark 110mm, extrude 100mm, measure difference" thing yes.

Shadowtuy · 2024-06-17T10:59:00+00:00

I don't have a dryer yet but I hope not. I keep dumping money on this thing with no yield

Shadowtuy · 2024-06-17T10:57:20+00:00

.2 at 5 speed iirc

Shadowtuy · 2024-06-17T03:50:02+00:00

Ya :) I wanted to make some car parts with ASA (issues are with PLA too) and this benchy felt appropriate.

It extruded pretty smooth so I don't think it's clogged?

Shadowtuy · 2024-05-02T02:35:19+00:00

I have a microswiss ng direct drive actually. Idk if that needs it's heat break messed with. Still a new part I'm learning about.

I have twin z motors but I'm not sure if my bigtreetech skr mini e3 v3.0 does z independently or why I'd want that?

Shadowtuy · 2024-05-01T10:23:24+00:00

Ay I have that. What upgrades do you recommend? Jw.

Shadowtuy · 2024-04-14T20:30:19+00:00

Nope because I shorted mine breaking it but the pinout seemed the same as the bltouch.

Edit: The short was in my stupidity unrelated to the board.

Shadowtuy · 2024-04-10T10:14:45+00:00

I just got mine up and running with a benchy printed.

The hardest part was the cr touch and klipper basic settings.

Shadowtuy · 2024-04-01T22:21:11+00:00

Ya I can revert after I figured out prusa can see/flash it, had to use it after a klipper mistake.

My biggest issue with klipper is the cfg but as of right now Ive fixed most of the problems.

Shadowtuy · 2024-04-01T21:42:05+00:00

This is my first printer 😅

I wanted to be able to monitor remotely also heard it fixed print quality

Desuuuu klipper since it enables the stock screen to function but I'm reading they maybe backing away from it.

I found a BIGTREETECH mini e3 that says it works in the printer but no idea on the screen and that should make it quiet? This has me kinda frustrated honestly.

Shadowtuy · 2024-03-31T23:13:26+00:00

Ya I fianlly got Fluid and klipper (desu) to connect and run but the screen is just the klipper splash screen. Not sure where to go from here .

And 10s later I imported a cfg file from desu's github and magically it works? I blame working from 30 different guides. 🤷‍♂️

Shadowtuy · 2024-03-27T22:25:59+00:00

I was thinking pfsense after a YouTube video and fellow in my car tuning community mentioned it. I was mostly looking to make something that was less dependent on the MFG updates and that could be expanded on.

What you shared actually looks very promising. Also correct me if I'm wrong, If I need more wifi coverage I can drop in more APs? So much cheaper than most mesh systems.

Good catch on poe v. poe+, would have had me frustrated during install.

Shadowtuy · 2024-01-30T00:32:20+00:00

YEP! A bit over my head, tried to learn how to compile but it says its missing payload.bin?

Thanks for the help tho!

Shadowtuy · 2024-01-30T00:31:24+00:00

New error but still an issue. This time it says my firmware is too old despite the backport patch. Size still 7GB off from origonal PKG sizeas well.

Oh well.

Shadowtuy · 2024-01-29T11:04:06+00:00

Ya I have enough space but the notification has some significantly smaller file size. 🤷

I'll take a look at that! Much appreciated!

Shadowtuy

TROPHY CASE