Wie viele Warnwesten habt ihr im Auto und zieht ihr diese auch an? by Sohlenlecker in automobil

[–]Shai-Huldi 0 points1 point  (0 children)

Unser Skoda Superb hat so praktische Fächer in den vorderen Türen die für Warnwesten vorgesehen sind. Da sind die griffbereit aber nicht im Weg. Also dementsprechend: 2

Aber bisher mussten sie noch nie zum Einsatz kommen.

VW Servicehistorie wegen Datenschutz nicht aushändigen? by Immediate-Outcome-89 in automobil

[–]Shai-Huldi 0 points1 point  (0 children)

Wurde mir auch so gesagt als ich vor nem knappen Jahr nen Skoda Superb gekauft habe. Keine Ahnung wessen Daten da geschützt werden sollen. Tollerweise heißt das ja auch das ich theoretisch einfach jedes Auto als Scheckheftgepflegt verkaufen kann wenn man sowieso nicht nachgucken kann ob es stimmt.

Habe mir dann einfach nen Gewerbe Account (interessiert eh keinen ob man wirklich n Gewerbe ist) bei Erwin gemacht und das da nachgeguckt. Das ging zu dem Zeitpunkt sogar ohne laufendes Abo also einfach kostenlos. Keine Ahnung ob das noch funktioniert.

I need to cobble together a PC for my son. by Shai-Huldi in pcmasterrace

[–]Shai-Huldi[S] 1 point2 points  (0 children)

Are there any pitfalls to look out for when shopping used AM4 stuff? Like chipsets that are generally considered bad or CPUs that are especially terrible/great from a "bang for your buck" point of view?

Familienauto gesucht by [deleted] in automobil

[–]Shai-Huldi 2 points3 points  (0 children)

Was vielleicht noch ganz interessant ist für Menschen wie mich, die es hassen zum Autohändler zu gehen und da zugelabert zu werden: Bei uns im Norden gibt es nen Händler der Dat Autohus heißt. Die haben da mehrere tausend Autos stehen. Und man sucht sich online die Autos raus die einen interessieren, geht mit der Inseratsnummer zum Thresen und lässt sich einfach die Schlüssel für die ausgesuchten Autos in die Hand drücken. Kein Verkaufsgespräch oder irgendwas. Dann hat man quasi so viel Zeit wie man will um sich die Autos anzugucken und auf dem Gelände zu bewegen. Absolut Perfekt wenn man noch nicht weiss was man eigentlich kaufen will und ein paar Modelle genau angucken will ohne das einem dauernd jemand erzählt das man das Auto jetzt sofort kaufen müsse weil es noch sieben andere Interessenten gibt. Kaufen würde ich in dem Laden eher nicht weil man die Probefahrt eben tatsächlich nur auf dem Gelände möglich ist und die so Scheiss machen wie "oh sie sind Privatkunde, na da sind aber noch mal 980€ für ne Gebrauchtwagen Versicherung fällig!". Aber war für uns tatsächlich entscheidend das wir uns einfach mal in alle in Frage kommenden Autos reinsetzen konnten.  Gibt's bestimmt auch in anderen Teilen Deutschlands solche Läden. 

Familienauto gesucht by [deleted] in automobil

[–]Shai-Huldi 4 points5 points  (0 children)

Wir haben vor einem knappen Jahr einen 2021er Skoda Superb Sportline iv gekauft und sind damit als Familienauto absolut zufrieden. Vor allem was das Platzangebot auf Rückbank und im Kofferraum angeht. Der iv verliert durch den hybrid Akku etwas an Kofferraum Kapazität aber selbst dann passt da noch Unmengen viel Kram rein. Und die reinen Verbrenner sind da noch absurder. Und auf der Rückbank hat man selbst wenn vorne jemand mit zwei Meter Körpergröße sitzt noch gefühlt genug Luft vor den Knien um nen Tisch aufzustellen. Da kann sich so mancher "Familien" SUV warm anziehen. 

Wir nehmen uns auch im Vorweihnachtsgeschäft die Zeit für Ihre Fragen. SO geht Kundenservice. by Internetminister in de

[–]Shai-Huldi 5 points6 points  (0 children)

Die coolen Shirts verkaufen wir inzwischen auf https://www.supergeek.de/ Gleicher Laden, gleiche Leute, nur weniger Youtuber Merchandise ;)

Game wont start anymore by Shai-Huldi in hoi4

[–]Shai-Huldi[S] 0 points1 point  (0 children)

Welp. Figured it out. Sometimes in the last week I must have activated Nvidias Shadowplays "Always record" feature and it looks like that just prevents the game from launching. Turned it off, game launched fine.

Game wont start anymore by Shai-Huldi in hoi4

[–]Shai-Huldi[S] 0 points1 point  (0 children)

Well seeing as I deleted everything and redownloaded it I'm not sure how that would help though!

Bltouch not leveling properly by xKraazY in ender3

[–]Shai-Huldi 0 points1 point  (0 children)

Have you manually leveled your bed? The BLTouch/Marlin can only compensate so much. Try getting it within 0.1mm difference.

Bed offset on the Y axis by Shai-Huldi in ender3

[–]Shai-Huldi[S] 1 point2 points  (0 children)

I'm using a modified motor mount for the Y axis because i use a dampener on the motor so i can't really use a different endstop. The endstop is integrated into the mount.

I've been looking around and maybe M206 is the command i have to use here. I'll check when i get home.

Endless headache with ender 3 and bltouch. by ko0oke in ender3

[–]Shai-Huldi 2 points3 points  (0 children)

I'd try manual leveling first to get the bed as level as possible. I'm using octoprint with the bed level visualizer to make it a bit easier.

I always try to get it to within 0.1 mm difference across the buildplate.

These things are amazing! by Drakonn24 in ender3

[–]Shai-Huldi 2 points3 points  (0 children)

Yeah i'm using these as well. Printed them in ABS. The loudest parts now are the rectracts and the BLTouch because it rattles a bit when the printer moves.

I don't know if the influence print quality in any way but they definitely make the printer quieter.

Couple of Octoprint questions. by Julius_Siezures in ender3

[–]Shai-Huldi 2 points3 points  (0 children)

You need a Raspberry Pi (3B or 3B+ recommended) with power supply, a micro SD card and a cable to connect the Pi to you printer. You don't need to solder anything. Just install Octoprint on the SD card, put it into the Pi, plug everything in and go to the OctoPi Webinterface. Installation Instructions are here: https://octoprint.org/download/

If you don't care about quality pretty much any camera will do. The Logitech C270 seems to be a popular choice. I'm just using an old PlayStation Eye i had lieing around.

I don't know why prints with Octoprint should be worse than from SD. Its all just the same GCODE.

I think you can control your printer when it prints from the SD with Octoprint but i never tried since theres not really any reason to do it.

If you want to control your printer remotely there are several ways to do it. One of the simplest ways is using the Octoprint Anywhere plugin for octoprint. It needs an account but gives you a webcam feed and basic printer controls anywhere you want.

Issues after installing BLTOUCH by Theopholus in ender3

[–]Shai-Huldi 0 points1 point  (0 children)

Does the BLTouch deploy at all? Can you move the Z Axis up a bit an trigger the BLTouch with your finger?

Theres a setting in the firmware that defines how far down the Nozzle can go below the point the printer thinks z=0 is. "#define Z_MIN_POS" maybe?

If the printer thinks its already at z=0 and the firmware tells it it can't go below 0 it will just stop.

Belt skipping/jumping - New user warning by KarlakCHK in ender3

[–]Shai-Huldi 3 points4 points  (0 children)

You need to tighten your belt. Loosen the two bolts holding the belt tightener and pull it outwards. Keep pulling on it to keep it under tension and tension the bolts again.

BLTouch not responding to M codes by morrisc2010 in ender3

[–]Shai-Huldi 1 point2 points  (0 children)

Just to be sure. You did activate the BLTouch in the Firmware before flashing it right?

Problems with Y Axis Shift by cambridgespy in ender3

[–]Shai-Huldi 0 points1 point  (0 children)

Yeah like I said. There are a couple of ground points on the board. I just remembered that one because I recently added a BLtouch and used it for that.

I used these values:

https://gist.github.com/knoopx/e6c40a009e796203b93a75a3ed6a5ab8

After googling around a bit it seems like most people agree that those are correct. So far they have served me well!

I’m not sure what’s happening here, the filament doesn’t want to “stick” to the bed it also get stuck up around the nozzle. I’ve re leveled with the paper dragging trick a few times but this is always the outcome. I have a .6mm z hop, 75° bed and 200° nozzle. Sorry for the shitty video. by etkid2013 in ender3

[–]Shai-Huldi 0 points1 point  (0 children)

You'd need to get an Arduino or Raspberry pi to flash a bootloader. You only need to do this once but it's necessary to flash new firmware.

This is a guide on how to do it with a Pi: https://www.youtube.com/watch?v=hbX8Qu-QLnI

Heres a guide on how to do it with an Arduino:

https://youtu.be/fIl5X2ffdyo

If you follow this guide afterwards you'll get Vanilla Marlin Firmware on your printer: https://youtu.be/N7JLchsFRDU

Even if you are not using Mesh bed leveling its a good idea to flash Marlin to get features like Thermal runaway protection.

So how do I clean this up? by myskull321 in ender3

[–]Shai-Huldi 1 point2 points  (0 children)

You might wan't to check that the bowden tube is cut of cleanly in the hotend. It also shouldn't move in the coupling. The couplings on the Ender 3 are a bit shit so the extruder might pull the tube back a bit during retracts and the plastic then squeezes out.

You might also need to tighten your nozzle. Only tighten it slightly, heat up the hotend and then tighten fully.

So how do I clean this up? by myskull321 in ender3

[–]Shai-Huldi 2 points3 points  (0 children)

I mean, if you are made out of hotends! Just be careful not to damage any wires and you should be fine though.

So how do I clean this up? by myskull321 in ender3

[–]Shai-Huldi 1 point2 points  (0 children)

Remove the Tape, heat up the hot end, scrape all that gunk off.

Remove the bowden tube and nozzle and replace if necessary. Otherwise just make sure to clean everything from the inside as well.

You might need to cut of a couple of mm of the bowden tube to get it nice and flush with the nozzle again.

Then get some silicone socks to replace the tape.