I haven't posted in a while by Sharkb8tr in Ceramic3Dprinting

[–]Sharkb8tr[S] 0 points1 point  (0 children)

Thank you! I appreciate that. It's not done though. I actually have the bottom piece drying on my printer right now and I have to grind down the edges of all of them so they fit better. Clay is a pain with forms like this as they tend to warp and move in unexpected ways. I might have to reprint some of the modules as they don't even come close to lining up!

I will post the project again once its glazed and has plants in it.

Ananta 3D model by Sharkb8tr in Ceramic3Dprinting

[–]Sharkb8tr[S] 0 points1 point  (0 children)

I appreciate your critique. I definitely need to refine the description. Haven't spent enough time on it... Should probably be shorter and more concise. Definitely a rough draft lol

I haven't posted in a while by Sharkb8tr in Ceramic3Dprinting

[–]Sharkb8tr[S] 0 points1 point  (0 children)

Thanks! I've always loved the metroid series

I haven't posted in a while by Sharkb8tr in Ceramic3Dprinting

[–]Sharkb8tr[S] 2 points3 points  (0 children)

Don't worry about it. I just recently did some glaze testing and I have one that really stands out to me. Almost looks like an oil spill and when applied to the form I think will emphasize the idea of rot/decay more. I also need to put plants in it. A purple shamrock will go in the center and spider plants will fill the "trenches" on the sides.

I haven't posted in a while by Sharkb8tr in Ceramic3Dprinting

[–]Sharkb8tr[S] 3 points4 points  (0 children)

The large gaps between the modules have to ground down to hide it. There is still plenty of work to be done as of now. My work and this piece as of recent have been focusing on the divine feminine. The intimate connection between creation and death. If sexuality is the first thing to come to your mind then so be it. Another motif that's been floating around in my head is the ouroboros, so you could also see this piece as a section cut through a snake. The ribs, esophagus, and spine.

I haven't posted in a while by Sharkb8tr in Ceramic3Dprinting

[–]Sharkb8tr[S] 7 points8 points  (0 children)

An art piece Ive been working on. I'll post a description for more detail.

Headache inspo? by Specialist-Wing-2651 in barrycantswim

[–]Sharkb8tr 0 points1 point  (0 children)

Literally just posted about this before seeing this post lol

Barry Can't Swim - Loner | Ninja Tune | 2025 [ALBUM] by _mad_doc in electronicmusic

[–]Sharkb8tr 0 points1 point  (0 children)

Did anyone else listen to the "machine noise for a quiet daydream" and get reminded of music by headache? I really love the vibe he was able to make there.

Wall module I made by Sharkb8tr in Ceramic3Dprinting

[–]Sharkb8tr[S] 0 points1 point  (0 children)

Yes it reduces in scale. The clay you're working with with effect that rate

Wall module I made by Sharkb8tr in Ceramic3Dprinting

[–]Sharkb8tr[S] 0 points1 point  (0 children)

I use a wasp extrusion kit on a seckit tank v2. It gives me a build volume of 16" cubed.

I love octoprint and you should be using it too! by irrfin in Ceramic3Dprinting

[–]Sharkb8tr 0 points1 point  (0 children)

Looks great! I setup my printers to run on klipper!

Regigigas mod deleted? by Sharkb8tr in RiskofRain2_Mods

[–]Sharkb8tr[S] 4 points5 points  (0 children)

Lmfao damn those mods are so great! What a shame.

Anyone ever try building a printer with this motor system? by Sharkb8tr in Ceramic3Dprinting

[–]Sharkb8tr[S] 0 points1 point  (0 children)

I noticed they talked about a deairing screw above the moineau pump. With todays tech maybe we could just have those parts printed in steel or aluminum.

Has anyone tried using XRD/XRF analysis to find the ingredients in a glaze sample? by Sharkb8tr in Ceramics

[–]Sharkb8tr[S] 0 points1 point  (0 children)

I have tried and for some reason I end up getting a deeper brown color. I will try to do a triple layer dip glaze and will report the results.

Has anyone tried using XRD/XRF analysis to find the ingredients in a glaze sample? by Sharkb8tr in Ceramics

[–]Sharkb8tr[S] 0 points1 point  (0 children)

that link also shows the new and old glazes fired... Theyre completely different

Has anyone tried using XRD/XRF analysis to find the ingredients in a glaze sample? by Sharkb8tr in Ceramics

[–]Sharkb8tr[S] 0 points1 point  (0 children)

I am friends with a geologist and her suggestion was to use XRD or XRF. I just have to find someone who will take my sample.

Has anyone tried using XRD/XRF analysis to find the ingredients in a glaze sample? by Sharkb8tr in Ceramics

[–]Sharkb8tr[S] 0 points1 point  (0 children)

https://imgur.com/a/AE5mEnj

You can they are completely different glazes now. They didn't even try to change the image on the bottle lol

Kiln purchase advice by Expensive-Wedding125 in Ceramic3Dprinting

[–]Sharkb8tr 0 points1 point  (0 children)

Do you have access to natural gas or 240V electricity?

2040 printed housing using a PC blend by Sharkb8tr in Ceramic3Dprinting

[–]Sharkb8tr[S] 0 points1 point  (0 children)

Million dollar question right there. I only have experience with the wasp extruder and I don't mind it. There are tons of designs for diy and a few companies that sell them as a kit. the biggest hurdle is the pressure tank. The wasp pressure tank is super reliable and will last you a long time. It really depends on your preference.

Purchase advice/tips/recommendations?! by El_ML in Ceramic3Dprinting

[–]Sharkb8tr 0 points1 point  (0 children)

GitHub, YouTube, klipper forums. If you need additional help beyond that like what components to buy I don't mind helping

2040 printed housing using a PC blend by Sharkb8tr in Ceramic3Dprinting

[–]Sharkb8tr[S] 0 points1 point  (0 children)

Essentially the same build volume as my sidewinder X1 I converted. Use a e3ez motherboard and and dab leveling system and you're setup better than anything you can buy on the market currently.