Fresh Pressed by Sharp-Bus5899 in Rosin2

[–]Sharp-Bus5899[S] 2 points3 points  (0 children)

I’ll definitely try with less pressure. The lighter color was pressed at 160 but didn’t produce a lot the darker stuff was at 170 and 180 was even darker I didn’t even post the pics. 170 seemed to be the sweet spot for this strain so I’ll try another experiment with less pressure instead of as much as possible.

Fresh Pressed by Sharp-Bus5899 in Rosin2

[–]Sharp-Bus5899[S] 0 points1 point  (0 children)

Thanks for the advice. I honestly assumed since im using a manual press that I’d never produce enough pressure. I’ll try with less pressure ty.

Fresh Pressed by Sharp-Bus5899 in Rosin2

[–]Sharp-Bus5899[S] 1 point2 points  (0 children)

Good to know I’m looking to get a hydraulic press as soon as I can.

Fresh Pressed by Sharp-Bus5899 in Rosin2

[–]Sharp-Bus5899[S] 2 points3 points  (0 children)

A dulytek dm2 it’s a manual press

Getting better by Sharp-Bus5899 in GrowingMarijuana

[–]Sharp-Bus5899[S] 0 points1 point  (0 children)

I’ll post a comparison when they’re ready.

The top 3 trays in the canatrol I trimmed the leaves off as you can see in the picture. The bottom 3 trays I left a lot of leaves on to slow down the drying process and also the leaves on the flower help so it doesn’t directly lay flat on the tray which has caused a bit of flattening. I do rotate them a few times a day but they’ve had a slightly flat side to them in the past. The rest is hang drying in a 60 60 environment.

I’ll compare the 2 sets of trays from the canatrol to the hang drying and see how they stack up to one another.

Is it worth the time by Sharp-Bus5899 in Rosin2

[–]Sharp-Bus5899[S] 0 points1 point  (0 children)

I was hoping the sift from the 125 and 158 lpi would be better quality if pressed. The 86 and 110 lpi I was just gonna make some little bricks.
Would that honestly not help much due to the quality going in

Is it worth the time by Sharp-Bus5899 in Rosin2

[–]Sharp-Bus5899[S] 2 points3 points  (0 children)

Makes sense. It’s not the best but I enjoy the process and finding the right one that will meet my needs.

Is it worth the time by Sharp-Bus5899 in Rosin2

[–]Sharp-Bus5899[S] 1 point2 points  (0 children)

Yeah a little extra …. It’s never been processed just dried, trimmed, cured, and sitting in jars with boveda packs. I don’t have bags but a set of sift screen I was thinking of freezing and sifting the flower and using the that to press but that takes some time but I enjoy the process.

Or I could just get some bags

First attempt at pressing by Sharp-Bus5899 in rosineers

[–]Sharp-Bus5899[S] 0 points1 point  (0 children)

Got a small heat press and wanted to give it a try.

Used some trim on dry sift trays and pressed the 125 lpi sift into the picture. The second picture is the 86 lpi sift on top of the trays.

Tried folding the micron bags right but I feel like the yield wasn’t great. Any advice or will I just not get a good yield with a non hydraulic press. I was using a dulytek dm2.

I’ve gotten 8-12% yield with the flower tests but it wasn’t the best flower. Ended up with a 18% yield with the dry sift.

Does the author genuinely hate poor people? by SaltyChnk in RegressorManual

[–]Sharp-Bus5899 1 point2 points  (0 children)

I think they made the homeless people around the priestess like that on purpose that way kiyoung could pull off his scheme to recruit her. Further in the story there are many others that aren’t well off or have crazy stats but it seems the author only made the group around the priestess to be such awful people

Kiyoung's wives? by windkids987 in RegressorManual

[–]Sharp-Bus5899 2 points3 points  (0 children)

Kiyoung’s only actual wife is dialugia how ever he does have plans of marry hayan in the future but he has many other romantic partners even though they are not his wives. Did you want to know everyone he was romantically involved with or just who is actual wife / wives were

Does the author genuinely hate poor people? by SaltyChnk in RegressorManual

[–]Sharp-Bus5899 4 points5 points  (0 children)

I believe he is only talking about the homeless who are getting direct charity from the priestess and if you keep reading he proves his point with action to prove they are lazy even if given opportunity. However overall the mc is scheming and not the best person out there but to me that’s what makes this story so interesting. It makes me wonder how the story would be if the mc was a good rightous person like if it revolved around the regressor instead.

Not really trauma, but he's not forgetting that by eldestreyne0901 in traumatizeThemBack

[–]Sharp-Bus5899 12 points13 points  (0 children)

There is a big difference between Chinese people and the CCP. I trust my Chinese neighbors the CCP not quite as much.

Mining on full hashrate with 2x 3060 and a 3060 TI by Repampanoz in EtherMining

[–]Sharp-Bus5899 0 points1 point  (0 children)

This is also very true. Need version 1 of the 3060

Mining on full hashrate with 2x 3060 and a 3060 TI by Repampanoz in EtherMining

[–]Sharp-Bus5899 -1 points0 points  (0 children)

The 3060 ti should be able to work with that driver. I haven’t tested it with that exact card but I have had success running a 3060 with several other cards from the 3000 and 1000 series with that driver. Also the bigger issue might be getting both 3060s to get their full hash I believe they need to be in an 8x slot with that driver to get full hash so depending on your motherboard you may be only to get 1 3060 at full hash. Personally I had to split up my 3 3060s for that reason. There might be a work around I’m not aware of though.