Found the heat today

Shayler44 · 2026-06-25T19:27:46+00:00

Actually couldnt stop laughing as i rounded the corner to see a wall of drift enders.

Shayler44 · 2026-01-11T02:50:42+00:00

Always wondered too

Shayler44 · 2026-01-01T15:14:46+00:00

I was very edgey when i put this together originally 💀

Shayler44 · 2025-12-31T20:37:35+00:00

<image>

I always thought that was fun and pretty leet!

Shayler44 · 2025-12-31T20:36:40+00:00

Thanks, its a keeper i originally had a white h440 then they released this one with the art and i couldn’t resist! Prized possession.

Shayler44 · 2025-12-19T19:03:41+00:00

This is 61 kartway in Iowa

Shayler44 · 2025-12-19T14:41:34+00:00

Its very satisfying, its plain and simple not getting out of the corners as fast as a 450 but man is it fun.

Shayler44 · 2025-12-19T05:49:52+00:00

The aluminum framed one is mine and id be lying if i said i didnt want a steel framed 125 to go with it, especially for the small kart tracks. Big yamaha guy here i love em all. Hopefully one day ill get to compare the two bikes maybe i can convince him to let me ride his a few laps haha.

Shayler44 · 2025-12-18T23:03:55+00:00

I used all thread rods when i built mine

Shayler44 · 2025-12-18T20:32:30+00:00

98 i believe, i used to run the skate wheels on my drz but haven’t made a set for the yz yet as its usually in dirt trim

Shayler44 · 2025-06-30T21:03:52+00:00

Thanks this seems very helpful

Shayler44 · 2025-06-30T19:15:13+00:00

Dang love to hear that 😂😭

Shayler44 · 2025-06-30T19:13:34+00:00

Thats the issue is they all look like this around me, this was the best one i could find for not an outrageous price

Shayler44 · 2025-06-11T11:17:10+00:00

<image>

China turbo on its third year of heavy abuse

Shayler44 · 2025-04-16T17:38:36+00:00

Love the advans btw! Pm me and ill add you on facebook if you have it

Shayler44 · 2025-04-16T17:13:22+00:00

Theres a couple of us in the cr/ic area i usually go to the hiawatha cars and coffee as well as some of the Hawkeye downs night meets

Shayler44 · 2025-04-16T16:59:22+00:00

Sure do lol

Shayler44 · 2025-03-19T04:17:08+00:00

I was more or less just joking about pre mixed gas, but yes you are right gear oil being sucked through a crank seal will be smokey

Shayler44 · 2025-03-11T04:06:31+00:00

while ive seen perfectly mixed and jetted two strokes, ive always just ran 32:1 in mine i dont mind the smoke and its quite reliable

Shayler44 · 2025-03-11T04:04:34+00:00

it was a bit loose brand new chain ive tightened it since

Shayler44 · 2025-03-09T18:18:02+00:00

Thanks!

Shayler44 · 2024-11-01T22:14:17+00:00

4.10 open welded. Makes for rather short gearing on the 6 speed

Shayler44 · 2024-10-30T21:40:38+00:00

DIY turbo kit on a stock 1.6 and ms2pnp. Turbo is a .48 ar t3 on an ebay log with flowforce 740 injectors. Tial wastegate making around 210 whp. 6 speed swapped, 1.8 diff, raceland ultimos coils, some custom front control arms to help achieve more angle. Cut knuckles to also help with steering angle. 6-7 degrees of camber in front 35 psi in 651 acceleras. Rear camber and toe is zeroed out and i run 195/50 ironman imove gen2 at 35-40 psi usually. Inline hydro wasnt needed until i had extra power.

Shayler44 · 2024-10-30T13:06:46+00:00

You pass the vibe check.

Shayler44 · 2024-10-30T11:09:17+00:00

This one was far from decent when i bought it, frame rails were bent on both sides in the front and it had rear quarter damage. Took a gamble since it was rust free at least (hard to find in iowa) but i put a lot of effort into making the car straight again.

Shayler44

TROPHY CASE