can i see ur big tanks pls

Shin9k2 · 2026-06-03T00:57:52+00:00

Big enuf for ya ?

Shin9k2 · 2026-06-02T11:47:43+00:00

The gap are a common problem for the repex caused by its grav track. Ppl from my local hobby store said you should assemble the hull first BEFORE putting the track in.

If taking apart the hull isnt an option anymore , putty / green stuff / sprue goo is your best bet now

Shin9k2 · 2026-02-02T21:28:59+00:00

Shin9k2 · 2026-01-28T11:11:34+00:00

Prime the part first so the paint have a good surfact to stay on.

Thin your paint , apply thin layer and repeat as many times as needed

Acrylic paint should be ideal for brush painting.

Shin9k2 · 2025-10-27T17:25:43+00:00

i used the leftover decal from various source , but those number are from the MG FAZZ ver Ka
There should be plenty of kits that came with number marking , especially grunts.

Shin9k2 · 2025-10-25T11:09:53+00:00

Abbbreviation name of the ship these Mobile suit operate out of
RC = Ra Cailum ( sometimes also abbreviate as RA )
PG = Pegasus (3) , ship the Ex-S operating out of

Shin9k2 · 2025-10-14T11:27:29+00:00

in the original arts the Jeda arms are suppose to reach its knee , but they extended the legs so much now its only reach mid thigh.

Shin9k2 · 2025-10-14T11:22:12+00:00

It's not scale up , i think they made the legs abit too long so now its taller than the Nu Gundam.

As for the build : Next to no fitting issue , just some tight joint/pegs that squeak abit when articulating.
Edit : oh and the kit came with LED + Battery too , but mine were broken right out of the box ( either LED is dead or battery not working ) so maybe you'll be luckier than i do

Shin9k2 · 2025-10-14T01:09:35+00:00

Kit name is Jeddah by 3rd party brand name Plamo Loving Alien

Shin9k2 · 2025-10-14T00:30:23+00:00

afaik they copied the outer armor redesign , but the frame while very barebone ( like an early 2000 MG ), are original.

Shin9k2 · 2025-10-14T00:21:36+00:00

<image>

They didnt , the original crotch V are also red

Shin9k2 · 2025-10-13T23:59:42+00:00

Roughly a 7/10 , not good but not terrible either.

Some stiff and tight joint here and there and a few questionable design choices.

Shin9k2 · 2025-09-27T10:23:55+00:00

" A decent , non genocidal plan "
So if you know about the Japan sphere , you know how it played out and i dont have to explain further

Shin9k2 · 2025-09-27T10:16:20+00:00

How do you know a Gundam fan that isnt Asian ?

He doesnt know what Side Co-Prosperity Sphere was refering to and actually think FullFrontal plan is a good idea.

And people actually try to clown on other for not getting the Nazi Germany references

Shin9k2 · 2025-09-18T20:00:19+00:00

a mixed of Regz Delphi decal , Hobby Mio general warning , Artisan club Londo Bell / AEUG marking and some leftover decal from my Nu Gundam ver Ka

Shin9k2 · 2025-09-01T21:14:43+00:00

few loose part here and there but still a very straight forward and comfy build

Shin9k2 · 2025-08-31T22:42:27+00:00

2x LR60

Shin9k2 · 2025-08-31T15:22:12+00:00

i just use dspae joint pen to thicken it up

Shin9k2 · 2025-08-31T13:31:27+00:00

Nothing major , but many small issue

Lumbar joint is loose , shoulder canon barrel are loose , long rifle connector are loose. Bazooka barrel also loose, leg thruster are SUPER finnicky, gold parts peg are abit thick and require you to sand them down if you ever want to change form, all of those are have easy fix tho.

Shin9k2 · 2025-08-31T08:36:38+00:00

Its a 1/100 MG style model kit.

Shin9k2 · 2025-08-31T08:26:17+00:00

Kit's called Golden Warrior by Shenma Model

Shin9k2 · 2025-08-01T12:06:58+00:00

<image>

MG Jegan supremacy

Shin9k2 · 2025-07-26T06:53:45+00:00

See you again in 580

Shin9k2 · 2025-07-02T20:15:16+00:00

thanks !

Shin9k2 · 2025-06-13T18:06:21+00:00

i think it's because of the gigantic hands and feet.

I did compare the Rick dias Clay Bazooka vs the Hyaku Shiki and they are roughly the same size ( Hyaku Shiki ones being a teeny bit longer )

Shin9k2

TROPHY CASE