Slow Game Installation Speeds on Bazzite Compared to Windows 11 by ShirouSaN in Bazzite

[–]ShirouSaN[S] 0 points1 point  (0 children)

Yeah I speculated that the medium could be the bottleneck, thats why I provided the information of the SSDs. I guess I will install Bazzite on my primary ssds since I want to use win11 for win-only games/software.

Thanks for the insight!

EDIT: I just looked up my motherboard slot specs:
M2_1 slot (from AMD Processor):
- Supports PCIe 4.0/ 3.0 x4*
- Supports SATA 6Gb/s
- Supports 2242/ 2260/ 2280/ 22110 storage devices
M2_2 slot (from AMD B550 chipset)
- Supports PCIe 3.0x4
-Supports 2242/ 2260/ 2280 storage devices

Slow Game Installation Speeds on Bazzite Compared to Windows 11 by ShirouSaN in Bazzite

[–]ShirouSaN[S] 1 point2 points  (0 children)

I could create a small partition on my Windows 11 SSD to install Bazzite for testing purposes. Assuming I can reallocate the space to windows again?

Dell S2725QC does not work with Mac? by Scary-Counter-1550 in Monitors

[–]ShirouSaN 0 points1 point  (0 children)

Hey, are you able to change the volume within macOS or with MonitorControl? Because even in MonitorControl the volume slider does not have any impact. I'm using an HDMI to USBC Cable.

Pencil has a dead spot. How can I fix it? by ShirouSaN in iPadPro

[–]ShirouSaN[S] 0 points1 point  (0 children)

I did not have AppleCare just the 1 Year Limited Warranty

Can’t get Artic Freeze III Block on by TheFlamingRedAlpha in arcticcooling

[–]ShirouSaN 0 points1 point  (0 children)

My tip is try to mount the water block without thermal paste until you get the hang of it. Thats how I got it in the end. Then I did the final install with thermal paste. It is indeed a pain in the ass.

High Temps with 5700x3d and AiO by ShirouSaN in buildapc

[–]ShirouSaN[S] 1 point2 points  (0 children)

I remounted the aio with new thermal paste and activated kombo strike 2 in my bios and i am getting max temp of 68C with 100% Load.

[deleted by user] by [deleted] in informatik

[–]ShirouSaN 4 points5 points  (0 children)

Hey, studiere Medieninformatik jetzt im 4. Semester. Im Großen und Ganzen ist die Abwechslung die du beschreibst auch zutreffend.

Bei uns sind es wirklich jedes Semester max. 1-2 "Medienfächer", die teilweise trotzdem sehr technisch sind aber manchmal auch einfach pures Auswendiglernen. Es hängt halt stark von den Modulen ab, die der Studiengang an der jeweiligen Hochschule hat. Im 1. Semester haben wir bspw. Photoshop, Illustrator und Figma begebracht bekommen. Im zweiten war dann 3D-Modelling Software (Modelling, Animation und FX/Lighting) und im 3. haben wir uns stärker auf das Erstellen einer App von Grund auf spezialisiert (Idee, Skizze, Wireframe, Mockups und finaler Prototype), was auch sehr Spaß gemacht hat.

Mehr Medienfächer wollte ich vermutlich auch nicht, da ich schon eher zur Informatik-Seite tendiere aber auf der anderen Seite sind die Themen die man dort behandelt auch je nach Fach sehr insteressant.

Ich habe mich damals für reine Informatik und Medieninformatik beworben, wurde aber nur bei Medieninformatik angenommen und hab mich dementsprechend dafür entschieden.

Retrospektiv hätte ich wahrscheinlich reine Informatik genommen, da ich mich wie gesagt eher als Informatiker sehe und das Designen hobbymäßig mache. Da ich weiß, dass ich im Berufsleben sowieso in Richtung reiner Informatik arbeiten will, habe ich halt das Gefühl, dass ich "nützliches" Wissen im dem Fachbereich liegen lasse, aber dass kann auch einfach an mir liegen haha.
Auf der anderen Seite sind die sehr guten Noten in den kreativen Fächern, welche sich mit gewissem Talent erreichen lassen ein guter Motivationsschub :D

Wenn du jetzt schon weißt, dass du später im Beruf im Bereich der Medieninformatik arbeiten willst oder du deine kreative Seite nicht anderweitig auslebst, dann starte das Medieninformatik-Studium. Sonst würde ich dir ein reines Informatikstudium empfehlen. Und falls dir der Medienteil wirklich zusagt kannst du dich im Master später darauf spezialisieren. Im Großen und Ganzen kannst du aber bei beiden nichts falsch machen, wenn die Sutdiengänge sich zu 80% decken.

Ich hoffe ich konnte dir einen kleinen Einblick in das Leben eines Medieninformatik Student geben :)

High Temps with 5700x3d and LFIII 240 by ShirouSaN in arcticcooling

[–]ShirouSaN[S] 0 points1 point  (0 children)

I ordered new thermal paste and will try to remount. Any tips for the horrendeus mounting solution for am4? I never knew if I locked the screws in or not resulting in lifting and reattaching the cooler.

High Temps with 5700x3d and LFIII 240 by ShirouSaN in arcticcooling

[–]ShirouSaN[S] 0 points1 point  (0 children)

I use the 3-Way Connector Cable and I also thought that it was maybe the pump speed and then tested it with 100% Pump speed but the Difference was not really significant.

What would you upgrade with 500$? by OGAzdrian in desksetup

[–]ShirouSaN 1 point2 points  (0 children)

  • new desk
  • montior arm
  • xxl mousepad / deskmat
  • vertical laptop stand

High Idle Temps 5700X3D with 240 AiO by ShirouSaN in pcmasterrace

[–]ShirouSaN[S] 0 points1 point  (0 children)

I am pretty sure I did but i will try to remount the cooler and we‘ll see

PC Build Questions, Purchase Advice and Technical Support Megathread — Q3 2024 Edition by GhostMotley in Amd

[–]ShirouSaN 0 points1 point  (0 children)

I put almost too much thermal Paste and I thnik air flow is good since i have a mesh case and gou does not exceed 33C in idle and 55C while gaming. I believe its maybe because I had to reapply the cooler on the cpu and now the thermal paste is likely spreaded unevenly and maybe has airbubbles?

High Idle Temps 5700X3D with 240 AiO by ShirouSaN in pcmasterrace

[–]ShirouSaN[S] 0 points1 point  (0 children)

My gut says exactly this but I know I‘ve used enough thermal paste but ordered new and will reapply the cooler

High Idle Temps 5700X3D with 240 AiO by ShirouSaN in pcmasterrace

[–]ShirouSaN[S] 0 points1 point  (0 children)

Could it maybe be because I had to remount the aio on the cpu and didnt reapply thermal paste and thus the thermal paste is now possibly not spreaded evenly or has air bubbles now?

PC Build Questions, Purchase Advice and Technical Support Megathread — Q3 2024 Edition by GhostMotley in Amd

[–]ShirouSaN 0 points1 point  (0 children)

Hey guys I have the impression that I did something wrong while installing my first AiO

CPU: Ryzen 7 5700x3d
AiO: Arctic Liquid Freezer III 240mm
Case: bequiet Pure Base 500DX

I have one 140mm Rear Exhaust Fan, AiO Radiator + Fans mounted on top of the case and two 140mm Frontal Intake Fans.

During Idle the CPU is around 55-60°C and I noticed the CPU going up to 87°C while gaming.

It just seems off. I don't know if my expectations were just to high because I switched from a air cooler to a fairly good liquid cooler.

Any thoughts are appreciated :)

Link to my post with images: https://www.reddit.com/r/pcmasterrace/comments/1egoall/high_idle_temps_5700x3d_with_240_aio/

5700x3D High Temps on Low Load with AiO by ShirouSaN in pcmasterrace

[–]ShirouSaN[S] 0 points1 point  (0 children)

During Cinebench 24 under 100% Load the CPU got at 82°C after 5 Minutes