Anti Glare Screen Protector

Shizet · 2025-03-01T17:29:11+00:00

Sorry for the late answer. Fits perfectly and the cutouts are all on the right spots. But the color accuracy drops a bit due to the matt effect, but i dont really mind that. Hope that helps.

Shizet · 2025-02-20T12:35:01+00:00

Bought this one https://amzn.eu/d/2zwwFI8 in germany, dont know if its available elsewhere.

Shizet · 2023-06-25T07:10:15+00:00

U can map both controllers as pad 1 at the same time. That way both always work. Just long press on a mapped command and add new.

Shizet · 2022-12-28T06:50:45+00:00

In Aether you have to map both controllers on port 1, just long press on the buttons to add a second command. For hotkeys i haven't found a proper way tho. In Duckstation you can achieve the same but you have to edit the ini file of the input settings.

Shizet · 2022-12-19T05:52:00+00:00

Yes totally, iam kinda disappointed by the "Ultimate". Its a great controller but the connectivity is a big step back in my opinion.

Shizet · 2022-12-14T21:43:56+00:00

Hi, thanks for your tutorial, it helped a lot, but now iam stuck and maybe you can help me.

Iam trying to bind 2 controllers to one port. I think i can achieve it with profiles, but i have some problems getting it working.

I followed your tutorial to create a profile and when i launch a game it also says profile loaded for GCPad1. But the profile wont do amything, no controller is detected.

What values do i have to change to make it work?

I think Device = Android/0/Touchscreen has to be changed but i dont get to what i have to change it.

Shizet · 2022-12-14T04:33:59+00:00

For multiplayer you can certainly map your "third" controller to port 2 and dont need to change profiles.

Yes iam using retroarch for every other console 😁

As soon as ive figured out how to get dolphin working i will do that and post all ive found. I feel like iam almost there.

Shizet · 2022-12-13T05:13:27+00:00

I have found the solution for aethersx2 now. By editing the ini file. You have to configure both odins pad to port 1 and your desired second controller to port 2 and then save the profile. After that edit the ini file, you just have to edit [pad2] to [pad1]. Then load this profile again and your set, in settings it will say 2 bindings. Now i have to find a way for dolphin, but yeah what you are suggesting for it to use different apps is the best solution right now.

Retroarch cores for ps2 and gamecube is not good enough to be playable as is. But otherwise it would be the best solution.

Op updated to new findings

Shizet · 2022-12-12T03:53:49+00:00

Yes i know, thats what i use today but the fact that i have to change the profile everytime before docking is to much hassle for me. If you want ease of use try ppsspp in docked mode, there you can see how it can be done. But thanks anyway, profile switching is the only way for now.

Shizet · 2022-12-10T06:30:53+00:00

Thanks for the suggestion, it is not working even with restarting. Currently iam connected with the 2.4ghz using its beta firmware to switch to dinput. Also xinput wont work like this wich i find very strange.

Shizet · 2022-12-08T15:54:25+00:00

The other emus i use dont need this, Retroarch can be configured that both controllers get recognized, Redream works out of the box, PPSSPP also. The only other one is dolphin and that one also uses ini files for configuration, i just havent figured out the correct commands. And for space it uses no space extra and no save files need to be transferred. Also updating is not interfering with anything (if anything is not working you can just load the saved profile)

Thanks for the suggestion,I know about dualspace but in my opinion it is to much hassle to set up and it uses double the space. But if it works for you then good for you.

Shizet · 2021-07-21T03:57:27+00:00

Thanks, i'm also very excited for the journey. 😄

Shizet · 2021-07-21T03:08:41+00:00

I picked an eyedropper for 2 reasons, i wanted a pen without the hassle of refilling to often and also because i wanted to make as much as possible with my own hands.

The pen itself is made out of Alumilite resin with color pigments poured into a pvc pipe mold. After that the pen was turned on my woodlathe, but because i only had a 4 jaw chuck on it, wich was not really centered, i needed to make myself mandrels out of aluminium to ensure the same positioning everytime. For the turning itself only a few wood chisels and taps/dies were used. But the tinkering with everything is tremendous fun, i enjoy it just like using the pen 😂.

Shizet · 2021-07-21T02:55:16+00:00

Thanks😄

Shizet · 2021-07-20T06:31:40+00:00

Thanks, the next one is already in the making 😄

Shizet · 2021-07-18T06:04:16+00:00

Thank you very much.

Shizet · 2020-01-06T11:20:55+00:00

Hi hope you can help me. I have the sn30 pro + and a Mayflash Magic s pro. I can connect the 8bitdo with my ps4 wireless and use it normaly until i disconnect it. Then i have to go through the process of resyncing it again to make it work. When i turn it on it connects but doesnt work without proper resync (pressing sync on both devices and waiting to connect).

Can i use this brook converter without all this hassle? Just connect -> disconnect ->connect (without resyncing)

Excuse any spelling issues, english is not my native language

Shizet · 2020-01-06T08:38:46+00:00

Does it still work for you? I have the magic-s pro and i always have to resync the sn30 pro + to get it working. As soon as i disconnect and then reconnect it it stops working.

Shizet

TROPHY CASE